[PATCH 2/2] drm: bridge: Add THS8134A/B support to dumb VGA DAC

[Linus Walleij]

This extends the dumb VGA DAC bridge to handle the THS8134A
and THS8134B VGA DACs in addition to those already handled.

The THS8134A, THS8134B and as it turns out also THS8135 need to
have data clocked out at the negative edge of the clock pulse,
since they clock it into the DAC at the positive edge (so by
then it needs to be stable) so we need some extra logic to flag
this on the connector to the driver.

The semantics of the flag DRM_BUS_FLAG_PIXDATA_NEGEDGE in
<drm/drm_connector.h> clearly indicates that this flag tells
when to *drive* the data, not when the receiver *reads* it,
so the TI variants needs to be handled like this.

Introduce a variant struct and contain the information there,
and add a bit of helpful comments about how this works so
people will get it right when adding new DACs or connectiong
new display drivers to DACs.

The fact that THS8135 might be working on some systems today
is probably due to the fact that the display driver cannot
configure when the data is clocked out and the electronics
have simply been designed around it so it works anyways.

The phenomenon is very real on the ARM reference designs using
PL111 where the hardware can control which edge to push out
the data.

Cc: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Cc: Bartosz Golaszewski <bgolaszewski at baylibre.com>
Cc: Maxime Ripard <maxime.ripard at free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 drivers/gpu/drm/bridge/dumb-vga-dac.c | 62 +++++++++++++++++++++++++++++++++--
 1 file changed, 59 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
index 831a606c4706..6c2fdcb4fde1 100644
--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 #include <linux/of_graph.h>
+#include <linux/of_device.h>
 #include <linux/regulator/consumer.h>
 
 #include <drm/drmP.h>
@@ -19,9 +20,20 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
 
+/**
+ * struct vga_dac_variant - characteristics of the DAC
+ * @posedge_clk: this DAC latches data into the DAC on the positive
+ *	edge of the clock pulse, which means that display controllers
+ *	need to clock it out on the negative edge
+ */
+struct vga_dac_variant {
+	bool posedge_clk;
+};
+
 struct dumb_vga {
 	struct drm_bridge	bridge;
 	struct drm_connector	connector;
+	struct vga_dac_variant const *variant;
 
 	struct i2c_adapter	*ddc;
 	struct regulator	*vdd;
@@ -67,6 +79,18 @@ static int dumb_vga_get_modes(struct drm_connector *connector)
 	/* And prefer a mode pretty much anyone can handle */
 	drm_set_preferred_mode(connector, 1024, 768);
 
+	if (vga->variant->posedge_clk)
+		/*
+		 * If the DAC latches the data into its registers on the
+		 * positive edge of the clock, the display driver needs to
+		 * drive the data out on the negative edge so it is
+		 * stable at the positive edge, so as to avoid flicker.
+		 *
+		 * Tell the driver that we want data on the negative edge
+		 */
+		connector->display_info.bus_flags |=
+			DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+
 	return ret;
 }
 
@@ -183,6 +207,7 @@ static int dumb_vga_probe(struct platform_device *pdev)
 	if (!vga)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, vga);
+	vga->variant = of_device_get_match_data(&pdev->dev);
 
 	vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
 	if (IS_ERR(vga->vdd)) {
@@ -226,10 +251,41 @@ static int dumb_vga_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct vga_dac_variant default_dac_variant = {
+	/*
+	 * These DACs read data on the negative edge. For example in the
+	 * ADV7123 datasheet (revision D, page 8) there is a timing diagram
+	 * making this clear.
+	 */
+	.posedge_clk = false,
+};
+
+static const struct vga_dac_variant ti_ths_dac_variant = {
+	/* The TI DACs read the data on the positive edge of the CLK */
+	.posedge_clk = true,
+};
+
 static const struct of_device_id dumb_vga_match[] = {
-	{ .compatible = "dumb-vga-dac" },
-	{ .compatible = "adi,adv7123" },
-	{ .compatible = "ti,ths8135" },
+	{
+		.compatible = "dumb-vga-dac",
+		.data = &default_dac_variant,
+	},
+	{
+		.compatible = "adi,adv7123",
+		.data = &default_dac_variant,
+	},
+	{
+		.compatible = "ti,ths8134a",
+		.data = &ti_ths_dac_variant,
+	},
+	{
+		.compatible = "ti,ths8134b",
+		.data = &ti_ths_dac_variant,
+	},
+	{
+		.compatible = "ti,ths8135",
+		.data = &ti_ths_dac_variant,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, dumb_vga_match);
-- 
2.13.5