[PATCH v3 3/4] spi: imx: Don't require platform data chipselect array

[Trent Piepho]

If the array is not present, assume all chip selects are native.  This
is the standard behavior for SPI masters configured via the device
tree and the behavior of this driver as well when it is configured via
device tree.

This reduces platform data vs DT differences and allows most of the
platform data based boards to remove their chip select arrays.

CC: Shawn Guo <shawnguo at kernel.org>
CC: Sascha Hauer <kernel at pengutronix.de>
CC: Fabio Estevam <fabio.estevam at nxp.com>
CC: Mark Brown <broonie at kernel.org>
Signed-off-by: Trent Piepho <tpiepho at impinj.com>
---
 drivers/spi/spi-imx.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index ad54f8258513..5caa6c9524fa 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1526,13 +1526,15 @@ static int spi_imx_probe(struct platform_device *pdev)
 	/* Get number of chip selects, either platform data or OF */
 	if (mxc_platform_info) {
 		master->num_chipselect = mxc_platform_info->num_chipselect;
-		master->cs_gpios = devm_kzalloc(&master->dev,
-			sizeof(int) * master->num_chipselect, GFP_KERNEL);
-		if (!master->cs_gpios)
-			return -ENOMEM;
-
-		for (i = 0; i < master->num_chipselect; i++)
-			master->cs_gpios[i] = mxc_platform_info->chipselect[i];
+		if (mxc_platform_info->chipselect) {
+			master->cs_gpios = devm_kzalloc(&master->dev,
+				sizeof(int) * master->num_chipselect, GFP_KERNEL);
+			if (!master->cs_gpios)
+				return -ENOMEM;
+
+			for (i = 0; i < master->num_chipselect; i++)
+				master->cs_gpios[i] = mxc_platform_info->chipselect[i];
+		}
 	} else {
 		u32 num_cs;
 
-- 
2.14.3