[PATCH v5 0/2] thermal: add brcmstb AVS TMON driver

[Florian Fainelli]

On 09/26/2017 02:27 PM, Markus Mayer wrote:
> From: Markus Mayer <mmayer at broadcom.com>
> 
> This series adds the brcmstb AVS TMON driver.
> 
> The driver was originally written by Brian Norris.

Rui, Eduardo, what's going on here? Can either one of you merge this
driver or are we going to miss another merge window?



> 
> Changes since v4:
> - disable trip points properly when needed; there was code left-over
>   from an older iteration of this driver that used long ints, which
>   resulted in code that was incorrect now that we are using ints
> - rebased on v4.14-rc1
> - patches 3 & 4 (turning on CONFIG_BRCMSTB_THERMAL for arm/arm64) are no
>   longer part of the series, because they were already picked up for 4.14
> 
> Changes since v3:
> - Rebased on v4.13-rc3 to resolve conflicts in the MAINTAINERS file
> 
> Changes since v2:
> - replaced calls to pr_debug() with calls to dev_dbg() [PATCH 2/4 only]
> - all other patches are unchanged from v2
> 
> Changes since v1:
> - Fixed wording in binding document
> - Fixed lincensing to consistently mention GPL v2
> - Use thermal_zone_get_slope() and thermal_zone_get_offset()
> - Some minor clean-ups
> 
> Brian Norris (2):
>   Documentation: devicetree: add binding for Broadcom STB AVS TMON
>   thermal: add brcmstb AVS TMON driver
> 
>  .../devicetree/bindings/thermal/brcm,avs-tmon.txt  |  20 ++
>  MAINTAINERS                                        |   8 +
>  drivers/thermal/Kconfig                            |   2 +-
>  drivers/thermal/broadcom/Kconfig                   |   7 +
>  drivers/thermal/broadcom/Makefile                  |   1 +
>  drivers/thermal/broadcom/brcmstb_thermal.c         | 387 +++++++++++++++++++++
>  6 files changed, 424 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
>  create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
> 


-- 
Florian