[PATCH 2/2] arm64: dts: uniphier: add resets properties
Masahiro Yamada
yamada.masahiro at socionext.com
Mon Oct 23 09:42:29 PDT 2017
Add resets properties to all nodes that have reset lines.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 12 ++++++++++++
arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 12 ++++++++++++
arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 11 +++++++++++
3 files changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index 0ae316e..1c63d0a 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -125,6 +125,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial at 54006900 {
@@ -135,6 +136,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial at 54006a00 {
@@ -145,6 +147,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial at 54006b00 {
@@ -155,6 +158,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
};
gpio: gpio at 55000000 {
@@ -203,6 +207,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -216,6 +221,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -226,6 +232,7 @@
#size-cells = <0>;
interrupts = <0 43 4>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
@@ -239,6 +246,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -252,6 +260,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
clocks = <&peri_clk 8>;
+ resets = <&peri_rst 8>;
clock-frequency = <100000>;
};
@@ -262,6 +271,7 @@
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
@@ -314,6 +324,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
clocks = <&sys_clk 4>;
+ resets = <&sys_rst 4>;
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
@@ -454,6 +465,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 23ea35f..5c81070 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -231,6 +231,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial at 54006900 {
@@ -241,6 +242,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial at 54006a00 {
@@ -251,6 +253,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial at 54006b00 {
@@ -261,6 +264,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
};
gpio: gpio at 55000000 {
@@ -303,6 +307,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -316,6 +321,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -326,6 +332,7 @@
#size-cells = <0>;
interrupts = <0 43 4>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
@@ -339,6 +346,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -352,6 +360,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
clocks = <&peri_clk 8>;
+ resets = <&peri_rst 8>;
clock-frequency = <100000>;
};
@@ -362,6 +371,7 @@
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
@@ -419,6 +429,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
clocks = <&sys_clk 4>;
+ resets = <&sys_rst 4>;
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
@@ -510,6 +521,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index f55b14b..48e7331 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -153,6 +153,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial at 54006900 {
@@ -163,6 +164,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial at 54006a00 {
@@ -173,6 +175,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial at 54006b00 {
@@ -183,6 +186,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
};
gpio: gpio at 55000000 {
@@ -214,6 +218,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
@@ -227,6 +232,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
@@ -240,6 +246,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
@@ -253,6 +260,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
@@ -264,6 +272,7 @@
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
+ resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
@@ -321,6 +330,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
clocks = <&sys_clk 4>;
+ resets = <&sys_rst 4>;
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
@@ -405,6 +415,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
--
2.7.4
More information about the linux-arm-kernel
mailing list