[PATCH] ARM: Fix zImage file size not aligned with CONFIG_EFI_STUB enabled

[Russell King - ARM Linux]

On Mon, Oct 23, 2017 at 11:50:46AM +0100, Russell King - ARM Linux wrote:
> On Mon, Oct 23, 2017 at 06:24:12PM +0800, jeffy wrote:
> > Hi Russell,
> > 
> > Thanks for your reply.
> > 
> > On 10/23/2017 04:50 PM, Russell King - ARM Linux wrote:
> > >>>
> > >>>hmm, right, didn't notice the data is already aligned...
> > >>>so it's indeed caused by the ksym:
> > >>>
> > >>>   [ 9] .data             PROGBITS        006ce000 6d6000 000200 00  WA  0
> > >>>0 4096
> > >>>   [10] ___ksymtab+sort   PROGBITS        006ce200 6d6200 000008 00  WA  0
> > >>>0  4
> > >>>   [11] .bss              NOBITS          006ce208 6d6208 00001c 00  WA  0
> > >>>0  4
> > >It's earlier - look for __ksymtab_strings.
> > 
> > the problem i meet is the appended dtb code found dtb invalid. i thought
> > that is because of unaligned zImage size, but i was wrong...
> 
> Hmm, you really ought not to be using the appended dtb code for modern
> systems - the appended dtb system is there for old boot loaders that
> are incapable of dealing with a dtb.  As is said in the option's help
> text:
> 
>   This is meant as a backward compatibility convenience for those
>   systems with a bootloader that can't be upgraded to accommodate
>   the documented boot protocol using a device tree.
> 
>   Beware that there is very little in terms of protection against
>   this option being confused by leftover garbage in memory that might
>   look like a DTB header after a reboot if no actual DTB is appended
>   to zImage.  Do not leave this option active in a production kernel
>   if you don't intend to always append a DTB.  Proper passing of the
>   location into r2 of a bootloader provided DTB is always preferable
>   to this option.
> 
> If you rely on it, and you have something that looks like a dtb after
> the image, then things will go wrong, so it's better _not_ to use it
> and to keep it disabled.
> 
> That aside, thanks for doing a more in-depth analysis of what is going
> on, which helps to understand /why/ Ard's fix works (whereas before
> it was rather nebulous.)
> 
> I wonder whether we ought to tell the linker to discard any unknown
> sections by adding at the bottom:
> 
> 	/DISCARD/ { *(*) }
> 
> but I do think we need to document this, specifically that _edata must
> point to the first byte after the binary file, and that the only
> sections after it are allowed to be the .bss and stack sections.

Short of adding the discard (which I think is itself risky, we've had
problems in the main kernel's vmlinux.lds in this area), I think we
ought to verify the size of the zImage file, so that the build fails
when we generate a zImage which is wrong, rather than producing a
zImage that is incorrect.  Maybe something like this?

8<=====
From: Russell King <rmk+kernel at armlinux.org.uk>
Subject: [PATCH] ARM: verify size of zImage

The linker can sometimes add additional sections to the zImage ELF file
which results in the zImage binary being larger than expected.  This
causes appended DT blobs to fail.

Verify that the zImage binary is the expected size, and fail the build
if this is not the case.

Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
 arch/arm/boot/Makefile         |  6 +++++-
 arch/arm/boot/verify_zimage.sh | 21 +++++++++++++++++++++
 2 files changed, 26 insertions(+), 1 deletion(-)
 create mode 100755 arch/arm/boot/verify_zimage.sh

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index a3af4dc08c3e..1290875556ae 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -53,6 +53,10 @@ $(obj)/Image $(obj)/zImage: FORCE
 
 else
 
+quiet_cmd_mkzimage = ZIMAGE  $@
+cmd_mkzimage = $(cmd_objcopy) && $(CONFIG_SHELL) -c \
+	'$(srctree)/$(src)/verify_zimage.sh $< $@ "$(NM)" || { rm -f $@; false; }'
+
 $(obj)/xipImage: FORCE
 	@echo 'Kernel not configured for XIP (CONFIG_XIP_KERNEL!=y)'
 	@false
@@ -64,7 +68,7 @@ $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
+	$(call if_changed,mkzimage)
 
 endif
 
diff --git a/arch/arm/boot/verify_zimage.sh b/arch/arm/boot/verify_zimage.sh
new file mode 100755
index 000000000000..922a93e61aa7
--- /dev/null
+++ b/arch/arm/boot/verify_zimage.sh
@@ -0,0 +1,21 @@
+#!/bin/sh
+set -e
+
+vmlinuz="$1"
+zimage="$2"
+nm="$3"
+
+magic_size=$("$nm" "$vmlinuz" | perl -e 'while (<>) {
+	$magic_start = hex($1) if /^([[:xdigit:]]+) . _magic_start$/;
+	$magic_end = hex($1) if /^([[:xdigit:]]+) . _magic_end$/;
+}; printf "%d\n", $magic_end - $magic_start;')
+
+zimage_size=$(stat -c '%s' "$zimage")
+
+# Verify that the resulting binary matches the size contained within
+# the binary (iow, the linker has not added any additional sections.)
+if [ $magic_size -ne $zimage_size ]; then
+   echo "zImage size ($zimage_size) disagrees with linked size ($magic_size)" >&2
+   exit 1
+fi
+exit 0
-- 
2.7.4


-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up