[PATCH 09/42] ARM: dts: r8a7790: add cpu capacity-dmips-mhz information
Simon Horman
horms+renesas at verge.net.au
Fri Oct 20 03:28:36 PDT 2017
From: Dietmar Eggemann <dietmar.eggemann at arm.com>
The following 'capacity-dmips-mhz' dt property values are used:
Cortex-A15: 1024, Cortex-A7: 539
They have been derived form the cpu_efficiency values:
Cortex-A15: 3891, Cortex-A7: 2048
by scaling them so that the Cortex-A15s (big cores) use 1024.
The cpu_efficiency values were originally derived from the "Big.LITTLE
Processing with ARM Cortex™-A15 & Cortex-A7" white paper
(http://www.cl.cam.ac.uk/~rdm34/big.LITTLE.pdf). Table 1 lists 1.9x
(3891/2048) as the Cortex-A15 vs Cortex-A7 performance ratio for the
Dhrystone benchmark.
The following platform is affected once cpu-invariant accounting
support is re-connected to the task scheduler:
r8a7790-lager
Signed-off-by: Dietmar Eggemann <dietmar.eggemann at arm.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 17a48199b7a9..92b7f3bd8b69 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -56,6 +56,7 @@
clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
+ capacity-dmips-mhz = <1024>;
/* kHz - uV - OPPs unknown yet */
operating-points = <1400000 1000000>,
@@ -73,6 +74,7 @@
clock-frequency = <1300000000>;
power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
+ capacity-dmips-mhz = <1024>;
};
cpu2: cpu at 2 {
@@ -82,6 +84,7 @@
clock-frequency = <1300000000>;
power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
next-level-cache = <&L2_CA15>;
+ capacity-dmips-mhz = <1024>;
};
cpu3: cpu at 3 {
@@ -91,6 +94,7 @@
clock-frequency = <1300000000>;
power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
next-level-cache = <&L2_CA15>;
+ capacity-dmips-mhz = <1024>;
};
cpu4: cpu at 100 {
@@ -100,6 +104,7 @@
clock-frequency = <780000000>;
power-domains = <&sysc R8A7790_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
+ capacity-dmips-mhz = <539>;
};
cpu5: cpu at 101 {
@@ -109,6 +114,7 @@
clock-frequency = <780000000>;
power-domains = <&sysc R8A7790_PD_CA7_CPU1>;
next-level-cache = <&L2_CA7>;
+ capacity-dmips-mhz = <539>;
};
cpu6: cpu at 102 {
@@ -118,6 +124,7 @@
clock-frequency = <780000000>;
power-domains = <&sysc R8A7790_PD_CA7_CPU2>;
next-level-cache = <&L2_CA7>;
+ capacity-dmips-mhz = <539>;
};
cpu7: cpu at 103 {
@@ -127,6 +134,7 @@
clock-frequency = <780000000>;
power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
next-level-cache = <&L2_CA7>;
+ capacity-dmips-mhz = <539>;
};
L2_CA15: cache-controller-0 {
--
2.11.0
More information about the linux-arm-kernel
mailing list