[PATCH 22/31] arm64: dts: ulcb-kf: hog USB3 hub control gpios

[Simon Horman]

From: Vladimir Barinov <vladimir.barinov at cogentembedded.com>

This adds gpio hogs for USB3 hub on ULCB Kingfisher board to power up and
remove from reset the hub

Signed-off-by: Vladimir Barinov <vladimir.barinov at cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 1923e5b8ee86..657ad1041965 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -53,6 +53,20 @@
 		interrupt-controller;
 		interrupt-parent = <&gpio6>;
 		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		hub_pwen {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "HUB pwen";
+		};
+
+		hub_rst {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "HUB rst";
+		};
 	};
 
 	gpio_exp_75: gpio at 75 {
-- 
2.11.0