[PATCH 17/17] coresight perf: Add ETR backend support for etm-perf
Suzuki K Poulose
suzuki.poulose at arm.com
Thu Oct 19 10:15:53 PDT 2017
Add necessary support for using ETR as a sink in ETM perf tracing.
We try make the best use of the available modes of buffers to
try and avoid software double buffering.
We can use the perf ring buffer for ETR directly if all of the
conditions below are met :
1) ETR is DMA coherent
2) perf is used in snapshot mode. In full tracing mode, we cannot
guarantee that the ETR will stop before it overwrites the data
which may not have been consumed by the user.
3) ETR supports save-restore with a scatter-gather mechanism
which can use a given set of pages we use the perf ring buffer
directly. If we have an in-built TMC ETR Scatter Gather unit,
we make use of a circular SG list to restart from a given head.
However, we need to align the starting offset to 4K in this case.
If the ETR doesn't support either of this, we fallback to software
double buffering.
Cc: Mathieu Poirier <mathieu.poirier at linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose at arm.com>
---
drivers/hwtracing/coresight/coresight-tmc-etr.c | 372 +++++++++++++++++++++++-
drivers/hwtracing/coresight/coresight-tmc.h | 2 +
2 files changed, 372 insertions(+), 2 deletions(-)
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
index 229c36b7266c..1dfe7cf7c721 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@@ -21,6 +21,9 @@
#include "coresight-priv.h"
#include "coresight-tmc.h"
+/* Lower limit for ETR hardware buffer in double buffering mode */
+#define TMC_ETR_PERF_MIN_BUF_SIZE SZ_1M
+
/*
* The TMC ETR SG has a page size of 4K. The SG table contains pointers
* to 4KB buffers. However, the OS may be use PAGE_SIZE different from
@@ -1328,10 +1331,371 @@ static int tmc_enable_etr_sink_sysfs(struct coresight_device *csdev)
return ret;
}
+/*
+ * etr_perf_buffer - Perf buffer used for ETR
+ * @etr_buf - Actual buffer used by the ETR
+ * @snaphost - Perf session mode
+ * @head - handle->head at the beginning of the session.
+ * @nr_pages - Number of pages in the ring buffer.
+ * @pages - Pages in the ring buffer.
+ * @flags - Capabilities of the hardware buffer used in the
+ * session. If flags == 0, we use software double
+ * buffering.
+ */
+struct etr_perf_buffer {
+ struct etr_buf *etr_buf;
+ bool snapshot;
+ unsigned long head;
+ int nr_pages;
+ void **pages;
+ u32 flags;
+};
+
+
+/*
+ * tmc_etr_setup_perf_buf: Allocate ETR buffer for use by perf. We try to
+ * use perf ring buffer pages for the ETR when we can. In the worst case
+ * we fallback to software double buffering. The size of the hardware buffer
+ * in this case is dependent on the size configured via sysfs, if we can't
+ * match the perf ring buffer size. We scale down the size by half until
+ * it reaches a limit of 1M, beyond which we give up.
+ */
+static struct etr_perf_buffer *
+tmc_etr_setup_perf_buf(struct tmc_drvdata *drvdata, int node, int nr_pages,
+ void **pages, bool snapshot)
+{
+ int i;
+ struct etr_buf *etr_buf;
+ struct etr_perf_buffer *etr_perf;
+ unsigned long size;
+ unsigned long buf_flags[] = {
+ ETR_BUF_F_RESTORE_FULL,
+ ETR_BUF_F_RESTORE_MINIMAL,
+ 0,
+ };
+
+ etr_perf = kzalloc_node(sizeof(*etr_perf), GFP_KERNEL, node);
+ if (!etr_perf)
+ return ERR_PTR(-ENOMEM);
+
+ size = nr_pages << PAGE_SHIFT;
+ /*
+ * We can use the perf ring buffer for ETR only if it is coherent
+ * and in snapshot mode as we cannot control how much data will be
+ * written before we stop.
+ */
+ if (tmc_etr_has_cap(drvdata, TMC_ETR_COHERENT) && snapshot) {
+ for (i = 0; buf_flags[i]; i++) {
+ etr_buf = tmc_alloc_etr_buf(drvdata, size,
+ buf_flags[i], node, pages);
+ if (!IS_ERR(etr_buf)) {
+ etr_perf->flags = buf_flags[i];
+ goto done;
+ }
+ }
+ }
+
+ /*
+ * We have to now fallback to software double buffering.
+ * The tricky decision is choosing a size for the hardware buffer.
+ * We could start with drvdata->size (configurable via sysfs) and
+ * scale it down until we can allocate the data.
+ */
+ etr_buf = tmc_alloc_etr_buf(drvdata, size, 0, node, NULL);
+ if (!IS_ERR(etr_buf))
+ goto done;
+ size = drvdata->size;
+ do {
+ etr_buf = tmc_alloc_etr_buf(drvdata, size, 0, node, NULL);
+ if (!IS_ERR(etr_buf))
+ goto done;
+ size /= 2;
+ } while (size >= TMC_ETR_PERF_MIN_BUF_SIZE);
+
+ kfree(etr_perf);
+ return ERR_PTR(-ENOMEM);
+
+done:
+ etr_perf->etr_buf = etr_buf;
+ return etr_perf;
+}
+
+
+static void *tmc_etr_alloc_perf_buffer(struct coresight_device *csdev,
+ int cpu, void **pages, int nr_pages,
+ bool snapshot)
+{
+ struct etr_perf_buffer *etr_perf;
+ struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
+
+ if (cpu == -1)
+ cpu = smp_processor_id();
+
+ etr_perf = tmc_etr_setup_perf_buf(drvdata, cpu_to_node(cpu),
+ nr_pages, pages, snapshot);
+ if (IS_ERR(etr_perf)) {
+ dev_dbg(drvdata->dev, "Unable to allocate ETR buffer\n");
+ return NULL;
+ }
+
+ etr_perf->snapshot = snapshot;
+ etr_perf->nr_pages = nr_pages;
+ etr_perf->pages = pages;
+
+ return etr_perf;
+}
+
+static void tmc_etr_free_perf_buffer(void *config)
+{
+ struct etr_perf_buffer *etr_perf = config;
+
+ if (etr_perf->etr_buf)
+ tmc_free_etr_buf(etr_perf->etr_buf);
+ kfree(etr_perf);
+}
+
+/*
+ * Pad the etr buffer with barrier packets to align the head to 4K aligned
+ * offset. This is required for ETR SG backed buffers, so that we can rotate
+ * the buffer easily and avoid a software double buffering.
+ */
+static s64 tmc_etr_pad_perf_buffer(struct etr_perf_buffer *etr_perf, s64 head)
+{
+ s64 new_head;
+ struct etr_buf *etr_buf = etr_perf->etr_buf;
+
+ head %= etr_buf->size;
+ new_head = ALIGN(head, SZ_4K);
+ if (head == new_head)
+ return head;
+ /*
+ * If the padding is not aligned to barrier packet size
+ * we can't do much.
+ */
+ if ((new_head - head) % CORESIGHT_BARRIER_PKT_SIZE)
+ return -EINVAL;
+ return tmc_etr_buf_insert_barrier_packets(etr_buf, head,
+ new_head - head);
+}
+
+static int tmc_etr_set_perf_buffer(struct coresight_device *csdev,
+ struct perf_output_handle *handle,
+ void *config)
+{
+ int rc;
+ unsigned long flags;
+ s64 head, new_head;
+ struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
+ struct etr_perf_buffer *etr_perf = config;
+ struct etr_buf *etr_buf = etr_perf->etr_buf;
+
+ etr_perf->head = handle->head;
+ head = etr_perf->head % etr_buf->size;
+ switch (etr_perf->flags) {
+ case ETR_BUF_F_RESTORE_MINIMAL:
+ new_head = tmc_etr_pad_perf_buffer(etr_perf, head);
+ if (new_head < 0)
+ return new_head;
+ if (head != new_head) {
+ rc = perf_aux_output_skip(handle, new_head - head);
+ if (rc)
+ return rc;
+ etr_perf->head = handle->head;
+ head = new_head;
+ }
+ /* Fall through */
+ case ETR_BUF_F_RESTORE_FULL:
+ rc = tmc_restore_etr_buf(drvdata, etr_buf, head, head, 0);
+ break;
+ case 0:
+ /* Nothing to do here. */
+ rc = 0;
+ break;
+ default:
+ dev_warn(drvdata->dev, "Unexpected flags in etr_perf buffer\n");
+ WARN_ON(1);
+ rc = -EINVAL;
+ }
+
+ /*
+ * This sink is going to be used in perf mode. No other session can
+ * grab it from us. So set the perf mode specific data here. This will
+ * be released just before we disable the sink from update_buffer call
+ * back.
+ */
+ if (!rc) {
+ spin_lock_irqsave(&drvdata->spinlock, flags);
+ if (WARN_ON(drvdata->perf_data))
+ rc = -EBUSY;
+ else
+ drvdata->perf_data = etr_perf;
+ spin_unlock_irqrestore(&drvdata->spinlock, flags);
+ }
+ return rc;
+}
+
+/*
+ * tmc_etr_sync_perf_buffer: Copy the actual trace data from the hardware
+ * buffer to the perf ring buffer.
+ */
+static void tmc_etr_sync_perf_buffer(struct etr_perf_buffer *etr_perf)
+{
+ struct etr_buf *etr_buf = etr_perf->etr_buf;
+ unsigned long bytes, to_copy, head = etr_perf->head;
+ unsigned long pg_idx, pg_offset, src_offset;
+ char **dst_pages, *src_buf;
+
+ head = etr_perf->head % (etr_perf->nr_pages << PAGE_SHIFT);
+ pg_idx = head >> PAGE_SHIFT;
+ pg_offset = head & (PAGE_SIZE - 1);
+ dst_pages = (char **)etr_perf->pages;
+ src_offset = etr_buf->offset;
+ to_copy = etr_buf->len;
+
+ while (to_copy > 0) {
+ /*
+ * We can copy minimum of :
+ * 1) what is available in the source buffer,
+ * 2) what is available in the source buffer, before it
+ * wraps around.
+ * 3) what is available in the destination page.
+ * in one iteration.
+ */
+ bytes = tmc_etr_buf_get_data(etr_buf, src_offset, to_copy,
+ &src_buf);
+ if (WARN_ON_ONCE(bytes <= 0))
+ break;
+ bytes = min(PAGE_SIZE - pg_offset, bytes);
+
+ memcpy(dst_pages[pg_idx] + pg_offset, src_buf, bytes);
+ to_copy -= bytes;
+ /* Move destination pointers */
+ pg_offset += bytes;
+ if (pg_offset == PAGE_SIZE) {
+ pg_offset = 0;
+ if (++pg_idx == etr_perf->nr_pages)
+ pg_idx = 0;
+ }
+
+ /* Move source pointers */
+ src_offset += bytes;
+ if (src_offset >= etr_buf->size)
+ src_offset -= etr_buf->size;
+ }
+}
+
+/*
+ * XXX: What is the expected behavior here in the following cases ?
+ * 1) Full trace mode, without double buffering : What should be the size
+ * reported back when the buffer is full and has wrapped around. Ideally,
+ * we should report for the lost trace to make sure the "head" in the ring
+ * buffer comes back to the position as in the trace buffer, rather than
+ * returning "total size" of the buffer.
+ * 2) In snapshot mode, should we always return "full buffer size" ?
+ */
+static unsigned long
+tmc_etr_update_perf_buffer(struct coresight_device *csdev,
+ struct perf_output_handle *handle,
+ void *config)
+{
+ bool double_buffer, lost = false;
+ unsigned long flags, offset, size = 0;
+ struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
+ struct etr_perf_buffer *etr_perf = config;
+ struct etr_buf *etr_buf = etr_perf->etr_buf;
+
+ double_buffer = (etr_perf->flags == 0);
+
+ spin_lock_irqsave(&drvdata->spinlock, flags);
+ if (WARN_ON(drvdata->perf_data != etr_perf)) {
+ lost = true;
+ spin_unlock_irqrestore(&drvdata->spinlock, flags);
+ goto out;
+ }
+
+ CS_UNLOCK(drvdata->base);
+
+ tmc_flush_and_stop(drvdata);
+
+ tmc_sync_etr_buf(drvdata);
+ CS_UNLOCK(drvdata->base);
+ /* Reset perf specific data */
+ drvdata->perf_data = NULL;
+ spin_unlock_irqrestore(&drvdata->spinlock, flags);
+
+ offset = etr_buf->offset + etr_buf->len;
+ if (offset > etr_buf->size)
+ offset -= etr_buf->size;
+
+ if (double_buffer) {
+ /*
+ * If we use software double buffering, update the ring buffer.
+ * And the size is what we have in the hardware buffer.
+ */
+ size = etr_buf->len;
+ tmc_etr_sync_perf_buffer(etr_perf);
+ } else {
+ /*
+ * If the hardware uses perf ring buffer the size of the data
+ * we have is from the old-head to the current head of the
+ * buffer. This also means in non-snapshot mode, we have lost
+ * one-full-buffer-size worth data, if the buffer wraps around.
+ */
+ unsigned long old_head;
+
+ old_head = (etr_perf->head % etr_buf->size);
+ size = (offset - old_head + etr_buf->size) % etr_buf->size;
+ }
+
+ /*
+ * Update handle->head in snapshot mode. Also update the size to the
+ * hardware buffer size if there was an overflow.
+ */
+ if (etr_perf->snapshot) {
+ if (double_buffer)
+ handle->head += size;
+ else
+ handle->head = offset;
+ if (etr_buf->full)
+ size = etr_buf->size;
+ }
+
+ lost |= etr_buf->full;
+out:
+ if (lost)
+ perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
+ return size;
+}
+
static int tmc_enable_etr_sink_perf(struct coresight_device *csdev)
{
- /* We don't support perf mode yet ! */
- return -EINVAL;
+ int rc = 0;
+ unsigned long flags;
+ struct etr_perf_buffer *etr_perf;
+ struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
+
+ spin_lock_irqsave(&drvdata->spinlock, flags);
+ /*
+ * There can be only one writer per sink in perf mode. If the sink
+ * is already open in SYSFS mode, we can't use it.
+ */
+ if (drvdata->mode != CS_MODE_DISABLED) {
+ rc = -EBUSY;
+ goto unlock_out;
+ }
+
+ etr_perf = drvdata->perf_data;
+ if (!etr_perf || !etr_perf->etr_buf) {
+ rc = -EINVAL;
+ goto unlock_out;
+ }
+
+ drvdata->mode = CS_MODE_PERF;
+ tmc_etr_enable_hw(drvdata, etr_perf->etr_buf);
+
+unlock_out:
+ spin_unlock_irqrestore(&drvdata->spinlock, flags);
+ return rc;
}
static int tmc_enable_etr_sink(struct coresight_device *csdev, u32 mode)
@@ -1372,6 +1736,10 @@ static void tmc_disable_etr_sink(struct coresight_device *csdev)
static const struct coresight_ops_sink tmc_etr_sink_ops = {
.enable = tmc_enable_etr_sink,
.disable = tmc_disable_etr_sink,
+ .alloc_buffer = tmc_etr_alloc_perf_buffer,
+ .update_buffer = tmc_etr_update_perf_buffer,
+ .set_buffer = tmc_etr_set_perf_buffer,
+ .free_buffer = tmc_etr_free_perf_buffer,
};
const struct coresight_ops tmc_etr_cs_ops = {
diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h
index 2c5b905b6494..06386ceb7866 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.h
+++ b/drivers/hwtracing/coresight/coresight-tmc.h
@@ -198,6 +198,7 @@ struct etr_buf {
* @trigger_cntr: amount of words to store after a trigger.
* @etr_caps: Bitmask of capabilities of the TMC ETR, inferred from the
* device configuration register (DEVID)
+ * @perf_data: PERF buffer for ETR.
* @sysfs_data: SYSFS buffer for ETR.
*/
struct tmc_drvdata {
@@ -219,6 +220,7 @@ struct tmc_drvdata {
u32 trigger_cntr;
u32 etr_caps;
struct etr_buf *sysfs_buf;
+ void *perf_data;
};
struct etr_buf_operations {
--
2.13.6
More information about the linux-arm-kernel
mailing list