[PATCH/RFC 4/5] regulator: bd9571mwv: Add support for backup mode

Geert Uytterhoeven geert at linux-m68k.org
Wed Oct 18 04:28:30 PDT 2017


Hi Mark,

On Wed, Oct 18, 2017 at 1:24 PM, Mark Brown <broonie at kernel.org> wrote:
> On Wed, Oct 18, 2017 at 01:19:08PM +0200, Geert Uytterhoeven wrote:
>> On Wed, Oct 18, 2017 at 1:02 PM, Mark Brown <broonie at kernel.org> wrote:
>> > On Tue, Oct 10, 2017 at 05:26:17PM +0200, Geert Uytterhoeven wrote:
>> >> Backup mode is not enabled automatically, as e.g. on Renesas
>> >> Salvator-X(S) boards enabling backup mode changes the role of the ACC
>> >> switch from a power switch to a wake-up switch.  Hence enabling it
>> >> prevents the board from being powered off using the ACC switch, which
>> >> may confuse the user.
>
>> > This sounds an awful lot like the standard power/wakeup, though the
>> > power change is a bit unexpected there.  I'm also wondering if it makes
>> > sense to just only enable the wakeup mode when suspending which
>> > preserves the power off functionality while also keeping the wakeup
>> > support.
>
>> The ACC switch is not a momentary switch (push button), but a toggle
>> switch with two positions.
>> Hence you cannot enable wakeup mode while suspending, as the proper
>> system suspend/resume procedure is:
>>   1. Enable backup mode in the PMIC,
>>   2. Switch ACC off (no-op as backup mode has been enabled),
>>   3. Suspend to RAM (PSCI suspend) => system suspends,
>>   4. Switch ACC on => system wakes up.
>> If you would combine steps 1 and 3, you can no longer do step 2 in between.
>
>> Yes, it's complicated :-(
>
> I'm confused, I thought this was a physical switch but that's talking
> about this as something software controlled (at least in step 2)?

The ACC switch is a physical switch.
Steps 1 and 3 are performed by software running on the board's SoC.
Steps 2 and 4 are performed by the external user (human or remote board
farm control hookup).

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



More information about the linux-arm-kernel mailing list