[PATCH 4/6] arm64: dts: uniphier: route on-board device IRQ to GPIO controller

[Masahiro Yamada]

Interrupt lines from on-board devices are connected to the GPIO
controller.  Handle this correctly.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts | 3 ++-
 arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
index ffb473a..77f50fd 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -40,7 +40,8 @@
 };
 
 &ethsc {
-	interrupts = <0 48 4>;
+	interrupt-parent = <&gpio>;
+	interrupts = <0 8>;
 };
 
 &serial0 {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index 1ca0c86..1f55fe1 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -40,7 +40,8 @@
 };
 
 &ethsc {
-	interrupts = <0 48 4>;
+	interrupt-parent = <&gpio>;
+	interrupts = <0 8>;
 };
 
 &serial0 {
-- 
2.7.4