[PATCH v4 1/4] clocksource: stm32: convert driver to timer_of
Daniel Lezcano
daniel.lezcano at linaro.org
Tue Oct 17 10:53:32 PDT 2017
On 17/10/2017 19:34, Benjamin Gaignard wrote:
> 2017-10-17 19:09 GMT+02:00 Daniel Lezcano <daniel.lezcano at linaro.org>:
>> On 02/10/2017 17:51, Benjamin Gaignard wrote:
>>> Convert driver to use timer_of helpers. This allow to remove
>>> custom proprietary structure.
>>>
>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
>>> ---
>>
>> [ ... ]
>>
>>> - clockevents_config_and_register(&data->evtdev,
>>> - DIV_ROUND_CLOSEST(rate, prescaler),
>>> - 0x1, max_delta);
>>> -
>>> - ret = request_irq(irq, stm32_clock_event_handler, IRQF_TIMER,
>>> - "stm32 clockevent", data);
>>> - if (ret) {
>>> - pr_err("%pOF: failed to request irq.\n", np);
>>> - goto err_get_irq;
>>> - }
>>> + clockevents_config_and_register(&to->clkevt,
>>> + timer_of_period(to), 0x60, max_delta);
>>
>>
>> Why 0x1 -> 0x60 ?
>
> Because if the min delta is too small it could generate too much interrupts
> and the system will not be able to catch all of them.
You did a change not related to what is described in the log.
Shame on you! 50 push-ups! Reply to this email when it is done.
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
More information about the linux-arm-kernel
mailing list