[PATCH v6 7/7] drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension
Mark Rutland
mark.rutland at arm.com
Tue Oct 17 07:21:42 PDT 2017
On Thu, Oct 12, 2017 at 01:30:38PM +0100, Will Deacon wrote:
> The ARMv8.2 architecture introduces the optional Statistical Profiling
> Extension (SPE).
[...]
> This patch adds support for SPE in the form of a new perf driver.
>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Alexander Shishkin <alexander.shishkin at linux.intel.com>
> Signed-off-by: Will Deacon <will.deacon at arm.com>
While I still hate abusing the software context, I know that's not going
to change, and I can't find anything else to complain about ;).
I assume you'll remember to wire up the pct_enable field.
FWIW:
Reviewed-by: Mark Rutland <mark.rutland at arm.com>
Thanks,
Mark.
> ---
> drivers/perf/Kconfig | 8 +
> drivers/perf/Makefile | 1 +
> drivers/perf/arm_spe_pmu.c | 1246 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1255 insertions(+)
> create mode 100644 drivers/perf/arm_spe_pmu.c
>
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index e5197ffb7422..43525a9dc947 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -43,4 +43,12 @@ config XGENE_PMU
> help
> Say y if you want to use APM X-Gene SoC performance monitors.
>
> +config ARM_SPE_PMU
> + tristate "Enable support for the ARMv8.2 Statistical Profiling Extension"
> + depends on PERF_EVENTS && ARM64
> + help
> + Enable perf support for the ARMv8.2 Statistical Profiling
> + Extension, which provides periodic sampling of operations in
> + the CPU pipeline and reports this via the perf AUX interface.
> +
> endmenu
> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
> index 6420bd4394d5..eaee60cf4b1b 100644
> --- a/drivers/perf/Makefile
> +++ b/drivers/perf/Makefile
> @@ -3,3 +3,4 @@ obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
> obj-$(CONFIG_QCOM_L2_PMU) += qcom_l2_pmu.o
> obj-$(CONFIG_QCOM_L3_PMU) += qcom_l3_pmu.o
> obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
> +obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
> diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
> new file mode 100644
> index 000000000000..a9cc7b25c116
> --- /dev/null
> +++ b/drivers/perf/arm_spe_pmu.c
> @@ -0,0 +1,1246 @@
> +/*
> + * Perf support for the Statistical Profiling Extension, introduced as
> + * part of ARMv8.2.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + *
> + * Copyright (C) 2016 ARM Limited
> + *
> + * Author: Will Deacon <will.deacon at arm.com>
> + */
> +
> +#define PMUNAME "arm_spe"
> +#define DRVNAME PMUNAME "_pmu"
> +#define pr_fmt(fmt) DRVNAME ": " fmt
> +
> +#include <linux/cpuhotplug.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/perf_event.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include <asm/sysreg.h>
> +
> +#define ARM_SPE_BUF_PAD_BYTE 0
> +
> +struct arm_spe_pmu_buf {
> + int nr_pages;
> + bool snapshot;
> + void *base;
> +};
> +
> +struct arm_spe_pmu {
> + struct pmu pmu;
> + struct platform_device *pdev;
> + cpumask_t supported_cpus;
> + struct hlist_node hotplug_node;
> +
> + int irq; /* PPI */
> +
> + u16 min_period;
> + u16 counter_sz;
> +
> +#define SPE_PMU_FEAT_FILT_EVT (1UL << 0)
> +#define SPE_PMU_FEAT_FILT_TYP (1UL << 1)
> +#define SPE_PMU_FEAT_FILT_LAT (1UL << 2)
> +#define SPE_PMU_FEAT_ARCH_INST (1UL << 3)
> +#define SPE_PMU_FEAT_LDS (1UL << 4)
> +#define SPE_PMU_FEAT_ERND (1UL << 5)
> +#define SPE_PMU_FEAT_DEV_PROBED (1UL << 63)
> + u64 features;
> +
> + u16 max_record_sz;
> + u16 align;
> + struct perf_output_handle __percpu *handle;
> +};
> +
> +#define to_spe_pmu(p) (container_of(p, struct arm_spe_pmu, pmu))
> +
> +/* Convert a free-running index from perf into an SPE buffer offset */
> +#define PERF_IDX2OFF(idx, buf) ((idx) % ((buf)->nr_pages << PAGE_SHIFT))
> +
> +/* Keep track of our dynamic hotplug state */
> +static enum cpuhp_state arm_spe_pmu_online;
> +
> +enum arm_spe_pmu_buf_fault_action {
> + SPE_PMU_BUF_FAULT_ACT_SPURIOUS,
> + SPE_PMU_BUF_FAULT_ACT_FATAL,
> + SPE_PMU_BUF_FAULT_ACT_OK,
> +};
> +
> +/* This sysfs gunk was really good fun to write. */
> +enum arm_spe_pmu_capabilities {
> + SPE_PMU_CAP_ARCH_INST = 0,
> + SPE_PMU_CAP_ERND,
> + SPE_PMU_CAP_FEAT_MAX,
> + SPE_PMU_CAP_CNT_SZ = SPE_PMU_CAP_FEAT_MAX,
> + SPE_PMU_CAP_MIN_IVAL,
> +};
> +
> +static int arm_spe_pmu_feat_caps[SPE_PMU_CAP_FEAT_MAX] = {
> + [SPE_PMU_CAP_ARCH_INST] = SPE_PMU_FEAT_ARCH_INST,
> + [SPE_PMU_CAP_ERND] = SPE_PMU_FEAT_ERND,
> +};
> +
> +static u32 arm_spe_pmu_cap_get(struct arm_spe_pmu *spe_pmu, int cap)
> +{
> + if (cap < SPE_PMU_CAP_FEAT_MAX)
> + return !!(spe_pmu->features & arm_spe_pmu_feat_caps[cap]);
> +
> + switch (cap) {
> + case SPE_PMU_CAP_CNT_SZ:
> + return spe_pmu->counter_sz;
> + case SPE_PMU_CAP_MIN_IVAL:
> + return spe_pmu->min_period;
> + default:
> + WARN(1, "unknown cap %d\n", cap);
> + }
> +
> + return 0;
> +}
> +
> +static ssize_t arm_spe_pmu_cap_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev);
> + struct dev_ext_attribute *ea =
> + container_of(attr, struct dev_ext_attribute, attr);
> + int cap = (long)ea->var;
> +
> + return snprintf(buf, PAGE_SIZE, "%u\n",
> + arm_spe_pmu_cap_get(spe_pmu, cap));
> +}
> +
> +#define SPE_EXT_ATTR_ENTRY(_name, _func, _var) \
> + &((struct dev_ext_attribute[]) { \
> + { __ATTR(_name, S_IRUGO, _func, NULL), (void *)_var } \
> + })[0].attr.attr
> +
> +#define SPE_CAP_EXT_ATTR_ENTRY(_name, _var) \
> + SPE_EXT_ATTR_ENTRY(_name, arm_spe_pmu_cap_show, _var)
> +
> +static struct attribute *arm_spe_pmu_cap_attr[] = {
> + SPE_CAP_EXT_ATTR_ENTRY(arch_inst, SPE_PMU_CAP_ARCH_INST),
> + SPE_CAP_EXT_ATTR_ENTRY(ernd, SPE_PMU_CAP_ERND),
> + SPE_CAP_EXT_ATTR_ENTRY(count_size, SPE_PMU_CAP_CNT_SZ),
> + SPE_CAP_EXT_ATTR_ENTRY(min_interval, SPE_PMU_CAP_MIN_IVAL),
> + NULL,
> +};
> +
> +static struct attribute_group arm_spe_pmu_cap_group = {
> + .name = "caps",
> + .attrs = arm_spe_pmu_cap_attr,
> +};
> +
> +/* User ABI */
> +#define ATTR_CFG_FLD_ts_enable_CFG config /* PMSCR_EL1.TS */
> +#define ATTR_CFG_FLD_ts_enable_LO 0
> +#define ATTR_CFG_FLD_ts_enable_HI 0
> +#define ATTR_CFG_FLD_pa_enable_CFG config /* PMSCR_EL1.PA */
> +#define ATTR_CFG_FLD_pa_enable_LO 1
> +#define ATTR_CFG_FLD_pa_enable_HI 1
> +#define ATTR_CFG_FLD_pct_enable_CFG config /* PMSCR_EL1.PCT */
> +#define ATTR_CFG_FLD_pct_enable_LO 2
> +#define ATTR_CFG_FLD_pct_enable_HI 2
> +#define ATTR_CFG_FLD_jitter_CFG config /* PMSIRR_EL1.RND */
> +#define ATTR_CFG_FLD_jitter_LO 16
> +#define ATTR_CFG_FLD_jitter_HI 16
> +#define ATTR_CFG_FLD_branch_filter_CFG config /* PMSFCR_EL1.B */
> +#define ATTR_CFG_FLD_branch_filter_LO 32
> +#define ATTR_CFG_FLD_branch_filter_HI 32
> +#define ATTR_CFG_FLD_load_filter_CFG config /* PMSFCR_EL1.LD */
> +#define ATTR_CFG_FLD_load_filter_LO 33
> +#define ATTR_CFG_FLD_load_filter_HI 33
> +#define ATTR_CFG_FLD_store_filter_CFG config /* PMSFCR_EL1.ST */
> +#define ATTR_CFG_FLD_store_filter_LO 34
> +#define ATTR_CFG_FLD_store_filter_HI 34
> +
> +#define ATTR_CFG_FLD_event_filter_CFG config1 /* PMSEVFR_EL1 */
> +#define ATTR_CFG_FLD_event_filter_LO 0
> +#define ATTR_CFG_FLD_event_filter_HI 63
> +
> +#define ATTR_CFG_FLD_min_latency_CFG config2 /* PMSLATFR_EL1.MINLAT */
> +#define ATTR_CFG_FLD_min_latency_LO 0
> +#define ATTR_CFG_FLD_min_latency_HI 11
> +
> +/* Why does everything I do descend into this? */
> +#define __GEN_PMU_FORMAT_ATTR(cfg, lo, hi) \
> + (lo) == (hi) ? #cfg ":" #lo "\n" : #cfg ":" #lo "-" #hi
> +
> +#define _GEN_PMU_FORMAT_ATTR(cfg, lo, hi) \
> + __GEN_PMU_FORMAT_ATTR(cfg, lo, hi)
> +
> +#define GEN_PMU_FORMAT_ATTR(name) \
> + PMU_FORMAT_ATTR(name, \
> + _GEN_PMU_FORMAT_ATTR(ATTR_CFG_FLD_##name##_CFG, \
> + ATTR_CFG_FLD_##name##_LO, \
> + ATTR_CFG_FLD_##name##_HI))
> +
> +#define _ATTR_CFG_GET_FLD(attr, cfg, lo, hi) \
> + ((((attr)->cfg) >> lo) & GENMASK(hi - lo, 0))
> +
> +#define ATTR_CFG_GET_FLD(attr, name) \
> + _ATTR_CFG_GET_FLD(attr, \
> + ATTR_CFG_FLD_##name##_CFG, \
> + ATTR_CFG_FLD_##name##_LO, \
> + ATTR_CFG_FLD_##name##_HI)
> +
> +GEN_PMU_FORMAT_ATTR(ts_enable);
> +GEN_PMU_FORMAT_ATTR(pa_enable);
> +GEN_PMU_FORMAT_ATTR(jitter);
> +GEN_PMU_FORMAT_ATTR(load_filter);
> +GEN_PMU_FORMAT_ATTR(store_filter);
> +GEN_PMU_FORMAT_ATTR(branch_filter);
> +GEN_PMU_FORMAT_ATTR(event_filter);
> +GEN_PMU_FORMAT_ATTR(min_latency);
> +
> +static struct attribute *arm_spe_pmu_formats_attr[] = {
> + &format_attr_ts_enable.attr,
> + &format_attr_pa_enable.attr,
> + &format_attr_jitter.attr,
> + &format_attr_load_filter.attr,
> + &format_attr_store_filter.attr,
> + &format_attr_branch_filter.attr,
> + &format_attr_event_filter.attr,
> + &format_attr_min_latency.attr,
> + NULL,
> +};
> +
> +static struct attribute_group arm_spe_pmu_format_group = {
> + .name = "format",
> + .attrs = arm_spe_pmu_formats_attr,
> +};
> +
> +static ssize_t arm_spe_pmu_get_attr_cpumask(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev);
> +
> + return cpumap_print_to_pagebuf(true, buf, &spe_pmu->supported_cpus);
> +}
> +static DEVICE_ATTR(cpumask, S_IRUGO, arm_spe_pmu_get_attr_cpumask, NULL);
> +
> +static struct attribute *arm_spe_pmu_attrs[] = {
> + &dev_attr_cpumask.attr,
> + NULL,
> +};
> +
> +static struct attribute_group arm_spe_pmu_group = {
> + .attrs = arm_spe_pmu_attrs,
> +};
> +
> +static const struct attribute_group *arm_spe_pmu_attr_groups[] = {
> + &arm_spe_pmu_group,
> + &arm_spe_pmu_cap_group,
> + &arm_spe_pmu_format_group,
> + NULL,
> +};
> +
> +/* Convert between user ABI and register values */
> +static u64 arm_spe_event_to_pmscr(struct perf_event *event)
> +{
> + struct perf_event_attr *attr = &event->attr;
> + u64 reg = 0;
> +
> + reg |= ATTR_CFG_GET_FLD(attr, ts_enable) << SYS_PMSCR_EL1_TS_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, pa_enable) << SYS_PMSCR_EL1_PA_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, pct_enable) << SYS_PMSCR_EL1_PCT_SHIFT;
> +
> + if (!attr->exclude_user)
> + reg |= BIT(SYS_PMSCR_EL1_E0SPE_SHIFT);
> +
> + if (!attr->exclude_kernel)
> + reg |= BIT(SYS_PMSCR_EL1_E1SPE_SHIFT);
> +
> + if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && capable(CAP_SYS_ADMIN))
> + reg |= BIT(SYS_PMSCR_EL1_CX_SHIFT);
> +
> + return reg;
> +}
> +
> +static void arm_spe_event_sanitise_period(struct perf_event *event)
> +{
> + struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
> + u64 period = event->hw.sample_period;
> + u64 max_period = SYS_PMSIRR_EL1_INTERVAL_MASK
> + << SYS_PMSIRR_EL1_INTERVAL_SHIFT;
> +
> + if (period < spe_pmu->min_period)
> + period = spe_pmu->min_period;
> + else if (period > max_period)
> + period = max_period;
> + else
> + period &= max_period;
> +
> + event->hw.sample_period = period;
> +}
> +
> +static u64 arm_spe_event_to_pmsirr(struct perf_event *event)
> +{
> + struct perf_event_attr *attr = &event->attr;
> + u64 reg = 0;
> +
> + arm_spe_event_sanitise_period(event);
> +
> + reg |= ATTR_CFG_GET_FLD(attr, jitter) << SYS_PMSIRR_EL1_RND_SHIFT;
> + reg |= event->hw.sample_period;
> +
> + return reg;
> +}
> +
> +static u64 arm_spe_event_to_pmsfcr(struct perf_event *event)
> +{
> + struct perf_event_attr *attr = &event->attr;
> + u64 reg = 0;
> +
> + reg |= ATTR_CFG_GET_FLD(attr, load_filter) << SYS_PMSFCR_EL1_LD_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, store_filter) << SYS_PMSFCR_EL1_ST_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, branch_filter) << SYS_PMSFCR_EL1_B_SHIFT;
> +
> + if (reg)
> + reg |= BIT(SYS_PMSFCR_EL1_FT_SHIFT);
> +
> + if (ATTR_CFG_GET_FLD(attr, event_filter))
> + reg |= BIT(SYS_PMSFCR_EL1_FE_SHIFT);
> +
> + if (ATTR_CFG_GET_FLD(attr, min_latency))
> + reg |= BIT(SYS_PMSFCR_EL1_FL_SHIFT);
> +
> + return reg;
> +}
> +
> +static u64 arm_spe_event_to_pmsevfr(struct perf_event *event)
> +{
> + struct perf_event_attr *attr = &event->attr;
> + return ATTR_CFG_GET_FLD(attr, event_filter);
> +}
> +
> +static u64 arm_spe_event_to_pmslatfr(struct perf_event *event)
> +{
> + struct perf_event_attr *attr = &event->attr;
> + return ATTR_CFG_GET_FLD(attr, min_latency)
> + << SYS_PMSLATFR_EL1_MINLAT_SHIFT;
> +}
> +
> +static void arm_spe_pmu_pad_buf(struct perf_output_handle *handle, int len)
> +{
> + struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
> + u64 head = PERF_IDX2OFF(handle->head, buf);
> +
> + memset(buf->base + head, ARM_SPE_BUF_PAD_BYTE, len);
> + if (!buf->snapshot)
> + perf_aux_output_skip(handle, len);
> +}
> +
> +static u64 arm_spe_pmu_next_snapshot_off(struct perf_output_handle *handle)
> +{
> + struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
> + struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
> + u64 head = PERF_IDX2OFF(handle->head, buf);
> + u64 limit = buf->nr_pages * PAGE_SIZE;
> +
> + /*
> + * The trace format isn't parseable in reverse, so clamp
> + * the limit to half of the buffer size in snapshot mode
> + * so that the worst case is half a buffer of records, as
> + * opposed to a single record.
> + */
> + if (head < limit >> 1)
> + limit >>= 1;
> +
> + /*
> + * If we're within max_record_sz of the limit, we must
> + * pad, move the head index and recompute the limit.
> + */
> + if (limit - head < spe_pmu->max_record_sz) {
> + arm_spe_pmu_pad_buf(handle, limit - head);
> + handle->head = PERF_IDX2OFF(limit, buf);
> + limit = ((buf->nr_pages * PAGE_SIZE) >> 1) + handle->head;
> + }
> +
> + return limit;
> +}
> +
> +static u64 __arm_spe_pmu_next_off(struct perf_output_handle *handle)
> +{
> + struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
> + struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
> + const u64 bufsize = buf->nr_pages * PAGE_SIZE;
> + u64 limit = bufsize;
> + u64 head, tail, wakeup;
> +
> + /*
> + * The head can be misaligned for two reasons:
> + *
> + * 1. The hardware left PMBPTR pointing to the first byte after
> + * a record when generating a buffer management event.
> + *
> + * 2. We used perf_aux_output_skip to consume handle->size bytes
> + * and CIRC_SPACE was used to compute the size, which always
> + * leaves one entry free.
> + *
> + * Deal with this by padding to the next alignment boundary and
> + * moving the head index. If we run out of buffer space, we'll
> + * reduce handle->size to zero and end up reporting truncation.
> + */
> + head = PERF_IDX2OFF(handle->head, buf);
> + if (!IS_ALIGNED(head, spe_pmu->align)) {
> + unsigned long delta = roundup(head, spe_pmu->align) - head;
> +
> + delta = min(delta, handle->size);
> + arm_spe_pmu_pad_buf(handle, delta);
> + head = PERF_IDX2OFF(handle->head, buf);
> + }
> +
> + /* If we've run out of free space, then nothing more to do */
G> + if (!handle->size)
> + goto no_space;
> +
> + /* Compute the tail and wakeup indices now that we've aligned head */
> + tail = PERF_IDX2OFF(handle->head + handle->size, buf);
> + wakeup = PERF_IDX2OFF(handle->wakeup, buf);
> +
> + /*
> + * Avoid clobbering unconsumed data. We know we have space, so
> + * if we see head == tail we know that the buffer is empty. If
> + * head > tail, then there's nothing to clobber prior to
> + * wrapping.
> + */
> + if (head < tail)
> + limit = round_down(tail, PAGE_SIZE);
> +
> + /*
> + * Wakeup may be arbitrarily far into the future. If it's not in
> + * the current generation, either we'll wrap before hitting it,
> + * or it's in the past and has been handled already.
> + *
> + * If there's a wakeup before we wrap, arrange to be woken up by
> + * the page boundary following it. Keep the tail boundary if
> + * that's lower.
> + */
> + if (handle->wakeup < (handle->head + handle->size) && head <= wakeup)
> + limit = min(limit, round_up(wakeup, PAGE_SIZE));
> +
> + if (limit > head)
> + return limit;
> +
> + arm_spe_pmu_pad_buf(handle, handle->size);
> +no_space:
> + perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED);
> + perf_aux_output_end(handle, 0);
> + return 0;
> +}
> +
> +static u64 arm_spe_pmu_next_off(struct perf_output_handle *handle)
> +{
> + struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
> + struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
> + u64 limit = __arm_spe_pmu_next_off(handle);
> + u64 head = PERF_IDX2OFF(handle->head, buf);
> +
> + /*
> + * If the head has come too close to the end of the buffer,
> + * then pad to the end and recompute the limit.
> + */
> + if (limit && (limit - head < spe_pmu->max_record_sz)) {
> + arm_spe_pmu_pad_buf(handle, limit - head);
> + limit = __arm_spe_pmu_next_off(handle);
> + }
> +
> + return limit;
> +}
> +
> +static void arm_spe_perf_aux_output_begin(struct perf_output_handle *handle,
> + struct perf_event *event)
> +{
> + u64 base, limit;
> + struct arm_spe_pmu_buf *buf;
> +
> + /* Start a new aux session */
> + buf = perf_aux_output_begin(handle, event);
> + if (!buf) {
> + event->hw.state |= PERF_HES_STOPPED;
> + /*
> + * We still need to clear the limit pointer, since the
> + * profiler might only be disabled by virtue of a fault.
> + */
> + limit = 0;
> + goto out_write_limit;
> + }
> +
> + limit = buf->snapshot ? arm_spe_pmu_next_snapshot_off(handle)
> + : arm_spe_pmu_next_off(handle);
> + if (limit)
> + limit |= BIT(SYS_PMBLIMITR_EL1_E_SHIFT);
> +
> + limit += (u64)buf->base;
> + base = (u64)buf->base + PERF_IDX2OFF(handle->head, buf);
> + write_sysreg_s(base, SYS_PMBPTR_EL1);
> +
> +out_write_limit:
> + write_sysreg_s(limit, SYS_PMBLIMITR_EL1);
> +}
> +
> +static void arm_spe_perf_aux_output_end(struct perf_output_handle *handle)
> +{
> + struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
> + u64 offset, size;
> +
> + offset = read_sysreg_s(SYS_PMBPTR_EL1) - (u64)buf->base;
> + size = offset - PERF_IDX2OFF(handle->head, buf);
> +
> + if (buf->snapshot)
> + handle->head = offset;
> +
> + perf_aux_output_end(handle, size);
> +}
> +
> +static void arm_spe_pmu_disable_and_drain_local(void)
> +{
> + /* Disable profiling at EL0 and EL1 */
> + write_sysreg_s(0, SYS_PMSCR_EL1);
> + isb();
> +
> + /* Drain any buffered data */
> + psb_csync();
> + dsb(nsh);
> +
> + /* Disable the profiling buffer */
> + write_sysreg_s(0, SYS_PMBLIMITR_EL1);
> + isb();
> +}
> +
> +/* IRQ handling */
> +static enum arm_spe_pmu_buf_fault_action
> +arm_spe_pmu_buf_get_fault_act(struct perf_output_handle *handle)
> +{
> + const char *err_str;
> + u64 pmbsr;
> + enum arm_spe_pmu_buf_fault_action ret;
> +
> + /*
> + * Ensure new profiling data is visible to the CPU and any external
> + * aborts have been resolved.
> + */
> + psb_csync();
> + dsb(nsh);
> +
> + /* Ensure hardware updates to PMBPTR_EL1 are visible */
> + isb();
> +
> + /* Service required? */
> + pmbsr = read_sysreg_s(SYS_PMBSR_EL1);
> + if (!(pmbsr & BIT(SYS_PMBSR_EL1_S_SHIFT)))
> + return SPE_PMU_BUF_FAULT_ACT_SPURIOUS;
> +
> + /*
> + * If we've lost data, disable profiling and also set the PARTIAL
> + * flag to indicate that the last record is corrupted.
> + */
> + if (pmbsr & BIT(SYS_PMBSR_EL1_DL_SHIFT))
> + perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED |
> + PERF_AUX_FLAG_PARTIAL);
> +
> + /* Report collisions to userspace so that it can up the period */
> + if (pmbsr & BIT(SYS_PMBSR_EL1_COLL_SHIFT))
> + perf_aux_output_flag(handle, PERF_AUX_FLAG_COLLISION);
> +
> + /* We only expect buffer management events */
> + switch (pmbsr & (SYS_PMBSR_EL1_EC_MASK << SYS_PMBSR_EL1_EC_SHIFT)) {
> + case SYS_PMBSR_EL1_EC_BUF:
> + /* Handled below */
> + break;
> + case SYS_PMBSR_EL1_EC_FAULT_S1:
> + case SYS_PMBSR_EL1_EC_FAULT_S2:
> + err_str = "Unexpected buffer fault";
> + goto out_err;
> + default:
> + err_str = "Unknown error code";
> + goto out_err;
> + }
> +
> + /* Buffer management event */
> + switch (pmbsr &
> + (SYS_PMBSR_EL1_BUF_BSC_MASK << SYS_PMBSR_EL1_BUF_BSC_SHIFT)) {
> + case SYS_PMBSR_EL1_BUF_BSC_FULL:
> + ret = SPE_PMU_BUF_FAULT_ACT_OK;
> + goto out_stop;
> + default:
> + err_str = "Unknown buffer status code";
> + }
> +
> +out_err:
> + pr_err_ratelimited("%s on CPU %d [PMBSR=0x%016llx, PMBPTR=0x%016llx, PMBLIMITR=0x%016llx]\n",
> + err_str, smp_processor_id(), pmbsr,
> + read_sysreg_s(SYS_PMBPTR_EL1),
> + read_sysreg_s(SYS_PMBLIMITR_EL1));
> + ret = SPE_PMU_BUF_FAULT_ACT_FATAL;
> +
> +out_stop:
> + arm_spe_perf_aux_output_end(handle);
> + return ret;
> +}
> +
> +static irqreturn_t arm_spe_pmu_irq_handler(int irq, void *dev)
> +{
> + struct perf_output_handle *handle = dev;
> + struct perf_event *event = handle->event;
> + enum arm_spe_pmu_buf_fault_action act;
> +
> + if (!perf_get_aux(handle))
> + return IRQ_NONE;
> +
> + act = arm_spe_pmu_buf_get_fault_act(handle);
> + if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS)
> + return IRQ_NONE;
> +
> + /*
> + * Ensure perf callbacks have completed, which may disable the
> + * profiling buffer in response to a TRUNCATION flag.
> + */
> + irq_work_run();
> +
> + switch (act) {
> + case SPE_PMU_BUF_FAULT_ACT_FATAL:
> + /*
> + * If a fatal exception occurred then leaving the profiling
> + * buffer enabled is a recipe waiting to happen. Since
> + * fatal faults don't always imply truncation, make sure
> + * that the profiling buffer is disabled explicitly before
> + * clearing the syndrome register.
> + */
> + arm_spe_pmu_disable_and_drain_local();
> + break;
> + case SPE_PMU_BUF_FAULT_ACT_OK:
> + /*
> + * We handled the fault (the buffer was full), so resume
> + * profiling as long as we didn't detect truncation.
> + * PMBPTR might be misaligned, but we'll burn that bridge
> + * when we get to it.
> + */
> + if (!(handle->aux_flags & PERF_AUX_FLAG_TRUNCATED)) {
> + arm_spe_perf_aux_output_begin(handle, event);
> + isb();
> + }
> + break;
> + case SPE_PMU_BUF_FAULT_ACT_SPURIOUS:
> + /* We've seen you before, but GCC has the memory of a sieve. */
> + break;
> + }
> +
> + /* The buffer pointers are now sane, so resume profiling. */
> + write_sysreg_s(0, SYS_PMBSR_EL1);
> + return IRQ_HANDLED;
> +}
> +
> +/* Perf callbacks */
> +static int arm_spe_pmu_event_init(struct perf_event *event)
> +{
> + u64 reg;
> + struct perf_event_attr *attr = &event->attr;
> + struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
> +
> + /* This is, of course, deeply driver-specific */
> + if (attr->type != event->pmu->type)
> + return -ENOENT;
> +
> + if (event->cpu >= 0 &&
> + !cpumask_test_cpu(event->cpu, &spe_pmu->supported_cpus))
> + return -ENOENT;
> +
> + if (arm_spe_event_to_pmsevfr(event) & SYS_PMSEVFR_EL1_RES0)
> + return -EOPNOTSUPP;
> +
> + if (attr->exclude_idle)
> + return -EOPNOTSUPP;
> +
> + /*
> + * Feedback-directed frequency throttling doesn't work when we
> + * have a buffer of samples. We'd need to manually count the
> + * samples in the buffer when it fills up and adjust the event
> + * count to reflect that. Instead, just force the user to specify
> + * a sample period.
> + */
> + if (attr->freq)
> + return -EINVAL;
> +
> + reg = arm_spe_event_to_pmsfcr(event);
> + if ((reg & BIT(SYS_PMSFCR_EL1_FE_SHIFT)) &&
> + !(spe_pmu->features & SPE_PMU_FEAT_FILT_EVT))
> + return -EOPNOTSUPP;
> +
> + if ((reg & BIT(SYS_PMSFCR_EL1_FT_SHIFT)) &&
> + !(spe_pmu->features & SPE_PMU_FEAT_FILT_TYP))
> + return -EOPNOTSUPP;
> +
> + if ((reg & BIT(SYS_PMSFCR_EL1_FL_SHIFT)) &&
> + !(spe_pmu->features & SPE_PMU_FEAT_FILT_LAT))
> + return -EOPNOTSUPP;
> +
> + reg = arm_spe_event_to_pmscr(event);
> + if (!capable(CAP_SYS_ADMIN) &&
> + (reg & (BIT(SYS_PMSCR_EL1_PA_SHIFT) |
> + BIT(SYS_PMSCR_EL1_CX_SHIFT) |
> + BIT(SYS_PMSCR_EL1_PCT_SHIFT))))
> + return -EACCES;
> +
> + return 0;
> +}
> +
> +static void arm_spe_pmu_start(struct perf_event *event, int flags)
> +{
> + u64 reg;
> + struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
> + struct hw_perf_event *hwc = &event->hw;
> + struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
> +
> + hwc->state = 0;
> + arm_spe_perf_aux_output_begin(handle, event);
> + if (hwc->state)
> + return;
> +
> + reg = arm_spe_event_to_pmsfcr(event);
> + write_sysreg_s(reg, SYS_PMSFCR_EL1);
> +
> + reg = arm_spe_event_to_pmsevfr(event);
> + write_sysreg_s(reg, SYS_PMSEVFR_EL1);
> +
> + reg = arm_spe_event_to_pmslatfr(event);
> + write_sysreg_s(reg, SYS_PMSLATFR_EL1);
> +
> + if (flags & PERF_EF_RELOAD) {
> + reg = arm_spe_event_to_pmsirr(event);
> + write_sysreg_s(reg, SYS_PMSIRR_EL1);
> + isb();
> + reg = local64_read(&hwc->period_left);
> + write_sysreg_s(reg, SYS_PMSICR_EL1);
> + }
> +
> + reg = arm_spe_event_to_pmscr(event);
> + isb();
> + write_sysreg_s(reg, SYS_PMSCR_EL1);
> +}
> +
> +static void arm_spe_pmu_stop(struct perf_event *event, int flags)
> +{
> + struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
> + struct hw_perf_event *hwc = &event->hw;
> + struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
> +
> + /* If we're already stopped, then nothing to do */
> + if (hwc->state & PERF_HES_STOPPED)
> + return;
> +
> + /* Stop all trace generation */
> + arm_spe_pmu_disable_and_drain_local();
> +
> + if (flags & PERF_EF_UPDATE) {
> + /*
> + * If there's a fault pending then ensure we contain it
> + * to this buffer, since we might be on the context-switch
> + * path.
> + */
> + if (perf_get_aux(handle)) {
> + enum arm_spe_pmu_buf_fault_action act;
> +
> + act = arm_spe_pmu_buf_get_fault_act(handle);
> + if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS)
> + arm_spe_perf_aux_output_end(handle);
> + else
> + write_sysreg_s(0, SYS_PMBSR_EL1);
> + }
> +
> + /*
> + * This may also contain ECOUNT, but nobody else should
> + * be looking at period_left, since we forbid frequency
> + * based sampling.
> + */
> + local64_set(&hwc->period_left, read_sysreg_s(SYS_PMSICR_EL1));
> + hwc->state |= PERF_HES_UPTODATE;
> + }
> +
> + hwc->state |= PERF_HES_STOPPED;
> +}
> +
> +static int arm_spe_pmu_add(struct perf_event *event, int flags)
> +{
> + int ret = 0;
> + struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
> + struct hw_perf_event *hwc = &event->hw;
> + int cpu = event->cpu == -1 ? smp_processor_id() : event->cpu;
> +
> + if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
> + return -ENOENT;
> +
> + hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
> +
> + if (flags & PERF_EF_START) {
> + arm_spe_pmu_start(event, PERF_EF_RELOAD);
> + if (hwc->state & PERF_HES_STOPPED)
> + ret = -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static void arm_spe_pmu_del(struct perf_event *event, int flags)
> +{
> + arm_spe_pmu_stop(event, PERF_EF_UPDATE);
> +}
> +
> +static void arm_spe_pmu_read(struct perf_event *event)
> +{
> +}
> +
> +static void *arm_spe_pmu_setup_aux(int cpu, void **pages, int nr_pages,
> + bool snapshot)
> +{
> + int i;
> + struct page **pglist;
> + struct arm_spe_pmu_buf *buf;
> +
> + /* We need at least two pages for this to work. */
> + if (nr_pages < 2)
> + return NULL;
> +
> + /*
> + * We require an even number of pages for snapshot mode, so that
> + * we can effectively treat the buffer as consisting of two equal
> + * parts and give userspace a fighting chance of getting some
> + * useful data out of it.
> + */
> + if (!nr_pages || (snapshot && (nr_pages & 1)))
> + return NULL;
> +
> + if (cpu == -1)
> + cpu = raw_smp_processor_id();
> +
> + buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, cpu_to_node(cpu));
> + if (!buf)
> + return NULL;
> +
> + pglist = kcalloc(nr_pages, sizeof(*pglist), GFP_KERNEL);
> + if (!pglist)
> + goto out_free_buf;
> +
> + for (i = 0; i < nr_pages; ++i) {
> + struct page *page = virt_to_page(pages[i]);
> +
> + if (PagePrivate(page)) {
> + pr_warn("unexpected high-order page for auxbuf!");
> + goto out_free_pglist;
> + }
> +
> + pglist[i] = virt_to_page(pages[i]);
> + }
> +
> + buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL);
> + if (!buf->base)
> + goto out_free_pglist;
> +
> + buf->nr_pages = nr_pages;
> + buf->snapshot = snapshot;
> +
> + kfree(pglist);
> + return buf;
> +
> +out_free_pglist:
> + kfree(pglist);
> +out_free_buf:
> + kfree(buf);
> + return NULL;
> +}
> +
> +static void arm_spe_pmu_free_aux(void *aux)
> +{
> + struct arm_spe_pmu_buf *buf = aux;
> +
> + vunmap(buf->base);
> + kfree(buf);
> +}
> +
> +/* Initialisation and teardown functions */
> +static int arm_spe_pmu_perf_init(struct arm_spe_pmu *spe_pmu)
> +{
> + static atomic_t pmu_idx = ATOMIC_INIT(-1);
> +
> + int idx;
> + char *name;
> + struct device *dev = &spe_pmu->pdev->dev;
> +
> + spe_pmu->pmu = (struct pmu) {
> + .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
> + .attr_groups = arm_spe_pmu_attr_groups,
> + /*
> + * We hitch a ride on the software context here, so that
> + * we can support per-task profiling (which is not possible
> + * with the invalid context as it doesn't get sched callbacks).
> + * This requires that userspace either uses a dummy event for
> + * perf_event_open, since the aux buffer is not setup until
> + * a subsequent mmap, or creates the profiling event in a
> + * disabled state and explicitly PERF_EVENT_IOC_ENABLEs it
> + * once the buffer has been created.
> + */
> + .task_ctx_nr = perf_sw_context,
> + .event_init = arm_spe_pmu_event_init,
> + .add = arm_spe_pmu_add,
> + .del = arm_spe_pmu_del,
> + .start = arm_spe_pmu_start,
> + .stop = arm_spe_pmu_stop,
> + .read = arm_spe_pmu_read,
> + .setup_aux = arm_spe_pmu_setup_aux,
> + .free_aux = arm_spe_pmu_free_aux,
> + };
> +
> + idx = atomic_inc_return(&pmu_idx);
> + name = devm_kasprintf(dev, GFP_KERNEL, "%s_%d", PMUNAME, idx);
> + return perf_pmu_register(&spe_pmu->pmu, name, -1);
> +}
> +
> +static void arm_spe_pmu_perf_destroy(struct arm_spe_pmu *spe_pmu)
> +{
> + perf_pmu_unregister(&spe_pmu->pmu);
> +}
> +
> +static void __arm_spe_pmu_dev_probe(void *info)
> +{
> + int fld;
> + u64 reg;
> + struct arm_spe_pmu *spe_pmu = info;
> + struct device *dev = &spe_pmu->pdev->dev;
> +
> + fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64DFR0_EL1),
> + ID_AA64DFR0_PMSVER_SHIFT);
> + if (!fld) {
> + dev_err(dev,
> + "unsupported ID_AA64DFR0_EL1.PMSVer [%d] on CPU %d\n",
> + fld, smp_processor_id());
> + return;
> + }
> +
> + /* Read PMBIDR first to determine whether or not we have access */
> + reg = read_sysreg_s(SYS_PMBIDR_EL1);
> + if (reg & BIT(SYS_PMBIDR_EL1_P_SHIFT)) {
> + dev_err(dev,
> + "profiling buffer owned by higher exception level\n");
> + return;
> + }
> +
> + /* Minimum alignment. If it's out-of-range, then fail the probe */
> + fld = reg >> SYS_PMBIDR_EL1_ALIGN_SHIFT & SYS_PMBIDR_EL1_ALIGN_MASK;
> + spe_pmu->align = 1 << fld;
> + if (spe_pmu->align > SZ_2K) {
> + dev_err(dev, "unsupported PMBIDR.Align [%d] on CPU %d\n",
> + fld, smp_processor_id());
> + return;
> + }
> +
> + /* It's now safe to read PMSIDR and figure out what we've got */
> + reg = read_sysreg_s(SYS_PMSIDR_EL1);
> + if (reg & BIT(SYS_PMSIDR_EL1_FE_SHIFT))
> + spe_pmu->features |= SPE_PMU_FEAT_FILT_EVT;
> +
> + if (reg & BIT(SYS_PMSIDR_EL1_FT_SHIFT))
> + spe_pmu->features |= SPE_PMU_FEAT_FILT_TYP;
> +
> + if (reg & BIT(SYS_PMSIDR_EL1_FL_SHIFT))
> + spe_pmu->features |= SPE_PMU_FEAT_FILT_LAT;
> +
> + if (reg & BIT(SYS_PMSIDR_EL1_ARCHINST_SHIFT))
> + spe_pmu->features |= SPE_PMU_FEAT_ARCH_INST;
> +
> + if (reg & BIT(SYS_PMSIDR_EL1_LDS_SHIFT))
> + spe_pmu->features |= SPE_PMU_FEAT_LDS;
> +
> + if (reg & BIT(SYS_PMSIDR_EL1_ERND_SHIFT))
> + spe_pmu->features |= SPE_PMU_FEAT_ERND;
> +
> + /* This field has a spaced out encoding, so just use a look-up */
> + fld = reg >> SYS_PMSIDR_EL1_INTERVAL_SHIFT & SYS_PMSIDR_EL1_INTERVAL_MASK;
> + switch (fld) {
> + case 0:
> + spe_pmu->min_period = 256;
> + break;
> + case 2:
> + spe_pmu->min_period = 512;
> + break;
> + case 3:
> + spe_pmu->min_period = 768;
> + break;
> + case 4:
> + spe_pmu->min_period = 1024;
> + break;
> + case 5:
> + spe_pmu->min_period = 1536;
> + break;
> + case 6:
> + spe_pmu->min_period = 2048;
> + break;
> + case 7:
> + spe_pmu->min_period = 3072;
> + break;
> + default:
> + dev_warn(dev, "unknown PMSIDR_EL1.Interval [%d]; assuming 8\n",
> + fld);
> + /* Fallthrough */
> + case 8:
> + spe_pmu->min_period = 4096;
> + }
> +
> + /* Maximum record size. If it's out-of-range, then fail the probe */
> + fld = reg >> SYS_PMSIDR_EL1_MAXSIZE_SHIFT & SYS_PMSIDR_EL1_MAXSIZE_MASK;
> + spe_pmu->max_record_sz = 1 << fld;
> + if (spe_pmu->max_record_sz > SZ_2K || spe_pmu->max_record_sz < 16) {
> + dev_err(dev, "unsupported PMSIDR_EL1.MaxSize [%d] on CPU %d\n",
> + fld, smp_processor_id());
> + return;
> + }
> +
> + fld = reg >> SYS_PMSIDR_EL1_COUNTSIZE_SHIFT & SYS_PMSIDR_EL1_COUNTSIZE_MASK;
> + switch (fld) {
> + default:
> + dev_warn(dev, "unknown PMSIDR_EL1.CountSize [%d]; assuming 2\n",
> + fld);
> + /* Fallthrough */
> + case 2:
> + spe_pmu->counter_sz = 12;
> + }
> +
> + dev_info(dev,
> + "probed for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
> + cpumask_pr_args(&spe_pmu->supported_cpus),
> + spe_pmu->max_record_sz, spe_pmu->align, spe_pmu->features);
> +
> + spe_pmu->features |= SPE_PMU_FEAT_DEV_PROBED;
> + return;
> +}
> +
> +static void __arm_spe_pmu_reset_local(void)
> +{
> + /*
> + * This is probably overkill, as we have no idea where we're
> + * draining any buffered data to...
> + */
> + arm_spe_pmu_disable_and_drain_local();
> +
> + /* Reset the buffer base pointer */
> + write_sysreg_s(0, SYS_PMBPTR_EL1);
> + isb();
> +
> + /* Clear any pending management interrupts */
> + write_sysreg_s(0, SYS_PMBSR_EL1);
> + isb();
> +}
> +
> +static void __arm_spe_pmu_setup_one(void *info)
> +{
> + struct arm_spe_pmu *spe_pmu = info;
> +
> + __arm_spe_pmu_reset_local();
> + enable_percpu_irq(spe_pmu->irq, IRQ_TYPE_NONE);
> +}
> +
> +static void __arm_spe_pmu_stop_one(void *info)
> +{
> + struct arm_spe_pmu *spe_pmu = info;
> +
> + disable_percpu_irq(spe_pmu->irq);
> + __arm_spe_pmu_reset_local();
> +}
> +
> +static int arm_spe_pmu_cpu_startup(unsigned int cpu, struct hlist_node *node)
> +{
> + struct arm_spe_pmu *spe_pmu;
> +
> + spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
> + if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
> + return 0;
> +
> + __arm_spe_pmu_setup_one(spe_pmu);
> + return 0;
> +}
> +
> +static int arm_spe_pmu_cpu_teardown(unsigned int cpu, struct hlist_node *node)
> +{
> + struct arm_spe_pmu *spe_pmu;
> +
> + spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
> + if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
> + return 0;
> +
> + __arm_spe_pmu_stop_one(spe_pmu);
> + return 0;
> +}
> +
> +static int arm_spe_pmu_dev_init(struct arm_spe_pmu *spe_pmu)
> +{
> + int ret;
> + cpumask_t *mask = &spe_pmu->supported_cpus;
> +
> + /* Make sure we probe the hardware on a relevant CPU */
> + ret = smp_call_function_any(mask, __arm_spe_pmu_dev_probe, spe_pmu, 1);
> + if (ret || !(spe_pmu->features & SPE_PMU_FEAT_DEV_PROBED))
> + return -ENXIO;
> +
> + /* Request our PPIs (note that the IRQ is still disabled) */
> + ret = request_percpu_irq(spe_pmu->irq, arm_spe_pmu_irq_handler, DRVNAME,
> + spe_pmu->handle);
> + if (ret)
> + return ret;
> +
> + /*
> + * Register our hotplug notifier now so we don't miss any events.
> + * This will enable the IRQ for any supported CPUs that are already
> + * up.
> + */
> + ret = cpuhp_state_add_instance(arm_spe_pmu_online,
> + &spe_pmu->hotplug_node);
> + if (ret)
> + free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
> +
> + return ret;
> +}
> +
> +static void arm_spe_pmu_dev_teardown(struct arm_spe_pmu *spe_pmu)
> +{
> + cpuhp_state_remove_instance(arm_spe_pmu_online, &spe_pmu->hotplug_node);
> + free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
> +}
> +
> +/* Driver and device probing */
> +static int arm_spe_pmu_irq_probe(struct arm_spe_pmu *spe_pmu)
> +{
> + struct platform_device *pdev = spe_pmu->pdev;
> + int irq = platform_get_irq(pdev, 0);
> +
> + if (irq < 0) {
> + dev_err(&pdev->dev, "failed to get IRQ (%d)\n", irq);
> + return -ENXIO;
> + }
> +
> + if (!irq_is_percpu(irq)) {
> + dev_err(&pdev->dev, "expected PPI but got SPI (%d)\n", irq);
> + return -EINVAL;
> + }
> +
> + if (irq_get_percpu_devid_partition(irq, &spe_pmu->supported_cpus)) {
> + dev_err(&pdev->dev, "failed to get PPI partition (%d)\n", irq);
> + return -EINVAL;
> + }
> +
> + spe_pmu->irq = irq;
> + return 0;
> +}
> +
> +static const struct of_device_id arm_spe_pmu_of_match[] = {
> + { .compatible = "arm,statistical-profiling-extension-v1", .data = (void *)1 },
> + { /* Sentinel */ },
> +};
> +
> +static int arm_spe_pmu_device_dt_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct arm_spe_pmu *spe_pmu;
> + struct device *dev = &pdev->dev;
> +
> + spe_pmu = devm_kzalloc(dev, sizeof(*spe_pmu), GFP_KERNEL);
> + if (!spe_pmu) {
> + dev_err(dev, "failed to allocate spe_pmu\n");
> + return -ENOMEM;
> + }
> +
> + spe_pmu->handle = alloc_percpu(typeof(*spe_pmu->handle));
> + if (!spe_pmu->handle)
> + return -ENOMEM;
> +
> + spe_pmu->pdev = pdev;
> + platform_set_drvdata(pdev, spe_pmu);
> +
> + ret = arm_spe_pmu_irq_probe(spe_pmu);
> + if (ret)
> + goto out_free_handle;
> +
> + ret = arm_spe_pmu_dev_init(spe_pmu);
> + if (ret)
> + goto out_free_handle;
> +
> + ret = arm_spe_pmu_perf_init(spe_pmu);
> + if (ret)
> + goto out_teardown_dev;
> +
> + return 0;
> +
> +out_teardown_dev:
> + arm_spe_pmu_dev_teardown(spe_pmu);
> +out_free_handle:
> + free_percpu(spe_pmu->handle);
> + return ret;
> +}
> +
> +static int arm_spe_pmu_device_remove(struct platform_device *pdev)
> +{
> + struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev);
> +
> + arm_spe_pmu_perf_destroy(spe_pmu);
> + arm_spe_pmu_dev_teardown(spe_pmu);
> + free_percpu(spe_pmu->handle);
> + return 0;
> +}
> +
> +static struct platform_driver arm_spe_pmu_driver = {
> + .driver = {
> + .name = DRVNAME,
> + .of_match_table = of_match_ptr(arm_spe_pmu_of_match),
> + },
> + .probe = arm_spe_pmu_device_dt_probe,
> + .remove = arm_spe_pmu_device_remove,
> +};
> +
> +static int __init arm_spe_pmu_init(void)
> +{
> + int ret;
> +
> + ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRVNAME,
> + arm_spe_pmu_cpu_startup,
> + arm_spe_pmu_cpu_teardown);
> + if (ret < 0)
> + return ret;
> + arm_spe_pmu_online = ret;
> +
> + ret = platform_driver_register(&arm_spe_pmu_driver);
> + if (ret)
> + cpuhp_remove_multi_state(arm_spe_pmu_online);
> +
> + return ret;
> +}
> +
> +static void __exit arm_spe_pmu_exit(void)
> +{
> + platform_driver_unregister(&arm_spe_pmu_driver);
> + cpuhp_remove_multi_state(arm_spe_pmu_online);
> +}
> +
> +module_init(arm_spe_pmu_init);
> +module_exit(arm_spe_pmu_exit);
> +
> +MODULE_DESCRIPTION("Perf driver for the ARMv8.2 Statistical Profiling Extension");
> +MODULE_AUTHOR("Will Deacon <will.deacon at arm.com>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.1.4
>
More information about the linux-arm-kernel
mailing list