[PATCH 07/10] KVM: arm/arm64: Preserve Exec permission across R/W permission faults

[Marc Zyngier]

On 16/10/17 21:08, Christoffer Dall wrote:
> On Mon, Oct 09, 2017 at 04:20:29PM +0100, Marc Zyngier wrote:
>> So far, we loose the Exec property whenever we take permission
>> faults, as we always reconstruct the PTE/PMD from scratch. This
>> can be counter productive as we can end-up with the following
>> fault sequence:
>>
>> 	X -> RO -> ROX -> RW -> RWX
>>
>> Instead, we can lookup the existing PTE/PMD and clear the XN bit in the
>> new entry if it was already cleared in the old one, leadig to a much
>> nicer fault sequence:
>>
>> 	X -> ROX -> RWX
>>
>> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
>> ---
>>  arch/arm/include/asm/kvm_mmu.h   | 10 ++++++++++
>>  arch/arm64/include/asm/kvm_mmu.h | 10 ++++++++++
>>  virt/kvm/arm/mmu.c               | 25 +++++++++++++++++++++++++
>>  3 files changed, 45 insertions(+)
>>
>> diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
>> index bf76150aad5f..ad442d86c23e 100644
>> --- a/arch/arm/include/asm/kvm_mmu.h
>> +++ b/arch/arm/include/asm/kvm_mmu.h
>> @@ -107,6 +107,11 @@ static inline bool kvm_s2pte_readonly(pte_t *pte)
>>  	return (pte_val(*pte) & L_PTE_S2_RDWR) == L_PTE_S2_RDONLY;
>>  }
>>  
>> +static inline bool kvm_s2pte_exec(pte_t *pte)
>> +{
>> +	return !(pte_val(*pte) & L_PTE_XN);
>> +}
>> +
>>  static inline void kvm_set_s2pmd_readonly(pmd_t *pmd)
>>  {
>>  	pmd_val(*pmd) = (pmd_val(*pmd) & ~L_PMD_S2_RDWR) | L_PMD_S2_RDONLY;
>> @@ -117,6 +122,11 @@ static inline bool kvm_s2pmd_readonly(pmd_t *pmd)
>>  	return (pmd_val(*pmd) & L_PMD_S2_RDWR) == L_PMD_S2_RDONLY;
>>  }
>>  
>> +static inline bool kvm_s2pmd_exec(pmd_t *pmd)
>> +{
>> +	return !(pmd_val(*pmd) & PMD_SECT_XN);
>> +}
>> +
>>  static inline bool kvm_page_empty(void *ptr)
>>  {
>>  	struct page *ptr_page = virt_to_page(ptr);
>> diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
>> index 60c420a5ac0d..e7af74b8b51a 100644
>> --- a/arch/arm64/include/asm/kvm_mmu.h
>> +++ b/arch/arm64/include/asm/kvm_mmu.h
>> @@ -203,6 +203,11 @@ static inline bool kvm_s2pte_readonly(pte_t *pte)
>>  	return (pte_val(*pte) & PTE_S2_RDWR) == PTE_S2_RDONLY;
>>  }
>>  
>> +static inline bool kvm_s2pte_exec(pte_t *pte)
>> +{
>> +	return !(pte_val(*pte) & PTE_S2_XN);
>> +}
>> +
>>  static inline void kvm_set_s2pmd_readonly(pmd_t *pmd)
>>  {
>>  	kvm_set_s2pte_readonly((pte_t *)pmd);
>> @@ -213,6 +218,11 @@ static inline bool kvm_s2pmd_readonly(pmd_t *pmd)
>>  	return kvm_s2pte_readonly((pte_t *)pmd);
>>  }
>>  
>> +static inline bool kvm_s2pmd_exec(pmd_t *pmd)
>> +{
>> +	return !(pmd_val(*pmd) & PMD_S2_XN);
>> +}
>> +
>>  static inline bool kvm_page_empty(void *ptr)
>>  {
>>  	struct page *ptr_page = virt_to_page(ptr);
>> diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c
>> index 1911fadde88b..ccc6106764a6 100644
>> --- a/virt/kvm/arm/mmu.c
>> +++ b/virt/kvm/arm/mmu.c
>> @@ -926,6 +926,17 @@ static int stage2_set_pmd_huge(struct kvm *kvm, struct kvm_mmu_memory_cache
>>  	return 0;
>>  }
>>  
>> +static pte_t *stage2_get_pte(struct kvm *kvm, phys_addr_t addr)
>> +{
>> +	pmd_t *pmdp;
>> +
>> +	pmdp = stage2_get_pmd(kvm, NULL, addr);
>> +	if (!pmdp || pmd_none(*pmdp))
>> +		return NULL;
>> +
>> +	return pte_offset_kernel(pmdp, addr);
>> +}
>> +
> 
> nit, couldn't you change this to be
> 
>     stage2_is_exec(struct kvm *kvm, phys_addr_t addr)
> 
> Which, if the pmd is a section mapping just checks that, and if we find
> a pte, we check that, and then we can have a simpler one-line call and
> check from both the pte and pmd paths below?

Yes, that's pretty neat. I've folded that in.

> 
>>  static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
>>  			  phys_addr_t addr, const pte_t *new_pte,
>>  			  unsigned long flags)
>> @@ -1407,6 +1418,13 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>>  		if (exec_fault) {
>>  			new_pmd = kvm_s2pmd_mkexec(new_pmd);
>>  			coherent_icache_guest_page(vcpu, pfn, PMD_SIZE);
>> +		} else if (fault_status == FSC_PERM) {
>> +			/* Preserve execute if XN was already cleared */
>> +			pmd_t *old_pmdp = stage2_get_pmd(kvm, NULL, fault_ipa);
>> +
>> +			if (old_pmdp && pmd_present(*old_pmdp) &&
>> +			    kvm_s2pmd_exec(old_pmdp))
>> +				new_pmd = kvm_s2pmd_mkexec(new_pmd);
> 
> Is the reverse case not also possible then?  That is, if we have an
> exec_fault, we could check if the entry is already writable and maintain
> the property as well.  Not sure how often that would get hit though, as
> a VM would only execute instructions on a page that has been written to,
> but is somehow read-only at stage2, meaning the host must have marked
> the page as read-only since content was written.  I think this could be
> a somewhat common pattern with something like KSM though?

I think this is already the case, because we always build the PTE/PMD as
either ROXN or RWXN, and only later clear the XN bit (see the
unconditional call to gfn_to_pfn_prot which should tell us whether to
map the page as writable or not). Or am I missing your point entirely?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...