[PATCH] ARM: dts: imx6ul-14x14-evk: switch lcdif pixel clock to video pll

[Shawn Guo]

On Thu, Oct 12, 2017 at 03:30:19PM +0200, Philipp Zabel wrote:
> By default, the lcdif_pre_sel mux is switched to the pll3_pfd1_540m PFD
> source. If this mux is allowed to propagate rate changes to its parent,
> setting the LCDIF pixel clock rate to 9 MHz, as required by the LCD
> panel, will cause the pll3_pfd1_540m PFD to be switched away from its
> nominal rate to 288 MHz.
> This has no negative side effects, as there are no other children to
> this PFD. Still, to avoid surprises, it might be preferrable to switch
> to the designated video PLL (pll5_video_div) as clock source for the
> LCDIF pixel clock.
> 
> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>

Applied, thanks.