[PATCH v3 09/10] arm64: dts: r8a7795: Use R-Car GPIO Gen3 fallback compat string
Simon Horman
horms+renesas at verge.net.au
Fri Oct 13 05:33:10 PDT 2017
Use newly added R-Car GPIO Gen3 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7795 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index d5cfd1a1c539..15ef292a8d9f 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -220,7 +220,7 @@
gpio0: gpio at e6050000 {
compatible = "renesas,gpio-r8a7795",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -235,7 +235,7 @@
gpio1: gpio at e6051000 {
compatible = "renesas,gpio-r8a7795",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -250,7 +250,7 @@
gpio2: gpio at e6052000 {
compatible = "renesas,gpio-r8a7795",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -265,7 +265,7 @@
gpio3: gpio at e6053000 {
compatible = "renesas,gpio-r8a7795",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -280,7 +280,7 @@
gpio4: gpio at e6054000 {
compatible = "renesas,gpio-r8a7795",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -295,7 +295,7 @@
gpio5: gpio at e6055000 {
compatible = "renesas,gpio-r8a7795",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -310,7 +310,7 @@
gpio6: gpio at e6055400 {
compatible = "renesas,gpio-r8a7795",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6055400 0 0x50>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -325,7 +325,7 @@
gpio7: gpio at e6055800 {
compatible = "renesas,gpio-r8a7795",
- "renesas,gpio-rcar";
+ "renesas,rcar-gen3-gpio";
reg = <0 0xe6055800 0 0x50>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
--
2.11.0
More information about the linux-arm-kernel
mailing list