[PATCH 6/7] ARM: dts: imx6ul: add support for TXUL modules on TXUL-Mainboard
Lothar Waßmann
LW at KARO-electronics.de
Fri Oct 13 03:43:02 PDT 2017
Add .dts files for the TXUL module variants TXUL-5010, TXUL-5011,
TXUL-8013 on the TXUL-Mainboard.
Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
---
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts | 271 ----------------------
arch/arm/boot/dts/imx6ul-txul-5010-mainboard.dts | 48 ++++
arch/arm/boot/dts/imx6ul-txul-5011-mainboard.dts | 48 ++++
arch/arm/boot/dts/imx6ul-txul-mainboard.dtsi | 265 +++++++++++++++++++++
arch/arm/boot/dts/imx6ull-txul-8013-mainboard.dts | 48 ++++
6 files changed, 413 insertions(+), 273 deletions(-)
delete mode 100644 arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
create mode 100644 arch/arm/boot/dts/imx6ul-txul-5010-mainboard.dts
create mode 100644 arch/arm/boot/dts/imx6ul-txul-5011-mainboard.dts
create mode 100644 arch/arm/boot/dts/imx6ul-txul-mainboard.dtsi
create mode 100644 arch/arm/boot/dts/imx6ull-txul-8013-mainboard.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6d25253..f61cee7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -474,9 +474,11 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-pico-hobbit.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
- imx6ul-tx6ul-mainboard.dtb \
+ imx6ul-txul-5010-mainboard.dtb \
+ imx6ul-txul-5011-mainboard.dtb \
imx6ull-14x14-evk.dtb \
- imx6ull-txul-8013.dtb
+ imx6ull-txul-8013.dtb \
+ imx6ull-txul-8013-mainboard.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
imx7d-colibri-eval-v3.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
deleted file mode 100644
index 28d055e..0000000
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Copyright 2015 Lothar Waßmann <LW at KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6ul.dtsi"
-#include "imx6ul-tx6ul.dtsi"
-
-/ {
- model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard";
- compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
-
- aliases {
- lcdif_24bit_pins_a = &pinctrl_disp0_3;
- mmc0 = &usdhc1;
- /delete-property/ mmc1;
- serial2 = &uart3;
- serial4 = &uart5;
- };
- /delete-node/ sound;
-};
-
-&can1 {
- xceiver-supply = <®_3v3>;
-};
-
-&can2 {
- xceiver-supply = <®_3v3>;
-};
-
-&ds1339 {
- status = "disabled";
-};
-
-&fec1 {
- pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
- /delete-node/ mdio;
-};
-
-&fec2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
- phy-supply = <®_3v3_etn>;
- phy-handle = <&etnphy1>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- etnphy0: ethernet-phy at 0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_etnphy0_int>;
- interrupt-parent = <&gpio5>;
- interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
- interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
- status = "okay";
- };
-
- etnphy1: ethernet-phy at 2 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_etnphy1_int>;
- interrupt-parent = <&gpio4>;
- interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
- interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
- status = "okay";
- };
- };
-};
-
-&i2c_gpio {
- status = "disabled";
-};
-
-&i2c2 {
- /delete-node/ codec at 0a;
- /delete-node/ touchscreen at 48;
-
- rtc: mcp7940x at 6f {
- compatible = "microchip,mcp7940x";
- reg = <0x6f>;
- };
-};
-
-&kpp {
- status = "disabled";
-};
-
-&lcdif {
- pinctrl-0 = <&pinctrl_disp0_3>;
-};
-
-®_usbotg_vbus{
- status = "disabled";
-};
-
-&usdhc1 {
- pinctrl-0 = <&pinctrl_usdhc1>;
- non-removable;
- /delete-property/ cd-gpios;
- cap-sdio-irq;
-};
-
-&uart1 {
- pinctrl-0 = <&pinctrl_uart1>;
- /delete-property/ uart-has-rtscts;
-};
-
-&uart2 {
- pinctrl-0 = <&pinctrl_uart2>;
- /delete-property/ uart-has-rtscts;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
- status = "okay";
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- status = "okay";
-};
-
-&uart6 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart6>;
- status = "okay";
-};
-
-&uart7 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart7>;
- status = "okay";
-};
-
-&uart8 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart8>;
- status = "disabled"; /* conflicts with LCDIF */
-};
-
-&iomuxc {
- hoggrp {
- fsl,pins = <
- MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x0b0b0 /* WLAN_RESET */
- >;
- };
-
- pinctrl_disp0_3: disp0grp-3 {
- fsl,pins = <
- MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */
- MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */
- MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */
- MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */
- MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10
- MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10
- MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10
- MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10
- MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10
- MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10
- /* LCD_DATA08..09 not wired */
- MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10
- MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10
- MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10
- MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10
- MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10
- MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10
- /* LCD_DATA16..17 not wired */
- MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10
- MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10
- MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10
- MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10
- MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10
- MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10
- >;
- };
-
- pinctrl_enet2_mdio: enet2-mdiogrp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0b0b0
- MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
- >;
- };
-
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x0b0b0
- MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0b0b0
- >;
- };
-
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x0b0b0
- MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x0b0b0
- >;
- };
-
- pinctrl_uart6: uart6grp {
- fsl,pins = <
- MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x0b0b0
- MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x0b0b0
- >;
- };
-
- pinctrl_uart7: uart7grp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0b0b0
- MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x0b0b0
- >;
- };
-
- pinctrl_uart8: uart8grp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0b0b0
- MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x0b0b0
- >;
- };
-};
diff --git a/arch/arm/boot/dts/imx6ul-txul-5010-mainboard.dts b/arch/arm/boot/dts/imx6ul-txul-5010-mainboard.dts
new file mode 100644
index 0000000..b2d3a51
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-txul-5010-mainboard.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul-tx6ul-0010.dts"
+#include "imx6ul-txul-mainboard.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TXUL-5010/-0010 Module on TXUL Mainboard";
+};
diff --git a/arch/arm/boot/dts/imx6ul-txul-5011-mainboard.dts b/arch/arm/boot/dts/imx6ul-txul-5011-mainboard.dts
new file mode 100644
index 0000000..fbdea92
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-txul-5011-mainboard.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul-tx6ul-0011.dts"
+#include "imx6ul-txul-mainboard.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TXUL-5011/-0011 Module on TXUL Mainboard";
+};
diff --git a/arch/arm/boot/dts/imx6ul-txul-mainboard.dtsi b/arch/arm/boot/dts/imx6ul-txul-mainboard.dtsi
new file mode 100644
index 0000000..8bb986f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-txul-mainboard.dtsi
@@ -0,0 +1,265 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ aliases {
+ lcdif_24bit_pins_a = &pinctrl_disp0_3;
+ mmc0 = &usdhc1;
+ /delete-property/ mmc1;
+ serial2 = &uart3;
+ serial4 = &uart5;
+ };
+
+ /delete-node/ sound;
+};
+
+&can1 {
+ xceiver-supply = <®_3v3>;
+};
+
+&can2 {
+ xceiver-supply = <®_3v3>;
+};
+
+&ds1339 {
+ status = "disabled";
+};
+
+&fec1 {
+ pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
+ /delete-node/ mdio;
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ phy-supply = <®_3v3_etn>;
+ phy-handle = <&etnphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ etnphy0: ethernet-phy at 0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_etnphy0_int>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>;
+ status = "okay";
+ };
+
+ etnphy1: ethernet-phy at 2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_etnphy1_int>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>;
+ status = "okay";
+ };
+ };
+};
+
+&i2c_gpio {
+ status = "disabled";
+};
+
+&i2c2 {
+ /delete-node/ codec at 0a;
+ /delete-node/ touchscreen at 48;
+
+ rtc: mcp7940x at 6f {
+ compatible = "microchip,mcp7940x";
+ reg = <0x6f>;
+ };
+};
+
+&kpp {
+ status = "disabled";
+};
+
+&lcdif {
+ pinctrl-0 = <&pinctrl_disp0_3>;
+};
+
+®_usbotg_vbus {
+ status = "disabled";
+};
+
+&usdhc1 {
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ non-removable;
+ /delete-property/ cd-gpios;
+ cap-sdio-irq;
+};
+
+&uart1 {
+ pinctrl-0 = <&pinctrl_uart1>;
+ /delete-property/ uart-has-rtscts;
+};
+
+&uart2 {
+ pinctrl-0 = <&pinctrl_uart2>;
+ /delete-property/ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ status = "okay";
+};
+
+&uart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8>;
+ status = "disabled"; /* conflicts with LCDIF */
+};
+
+&iomuxc {
+ hoggrp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x0b0b0 /* WLAN_RESET */
+ >;
+ };
+
+ pinctrl_disp0_3: disp0grp-3 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10
+ /* LCD_DATA08..09 not wired */
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10
+ /* LCD_DATA16..17 not wired */
+ MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10
+ MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10
+ MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10
+ MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10
+ MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10
+ MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10
+ >;
+ };
+
+ pinctrl_enet2_mdio: enet2-mdiogrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x0b0b0
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0b0b0
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x0b0b0
+ MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x0b0b0
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x0b0b0
+ MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x0b0b0
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0b0b0
+ MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x0b0b0
+ >;
+ };
+
+ pinctrl_uart8: uart8grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0b0b0
+ MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x0b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-txul-8013-mainboard.dts b/arch/arm/boot/dts/imx6ull-txul-8013-mainboard.dts
new file mode 100644
index 0000000..34d42e5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-txul-8013-mainboard.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ull-txul-8013.dts"
+#include "imx6ul-txul-mainboard.dtsi"
+
+/ {
+ model = "Ka-Ro electronics TXUL-8013 Module on TXUL Mainboard";
+};
--
2.1.4
More information about the linux-arm-kernel
mailing list