[PATCH 1/2] vgaarb: Select a default VGA device even if there's no legacy VGA

Thu Oct 12 05:56:32 PDT 2017

On 12/10/17 13:05, Lothar Waßmann wrote:
> Hi,
> 
> On Thu, 12 Oct 2017 12:24:10 +0100 Julien Thierry wrote:
>> Hi Bjorn,
>>
>> On 06/10/17 23:24, Bjorn Helgaas wrote:
>>> From: Bjorn Helgaas <bhelgaas at google.com>
>>>
>>> Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is
>>> behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter
>>> never selects it as the default, which means Xorg auto-detection doesn't
>>> work.
>>>
>>> VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g.,
>>> [mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are
>>> not configurable by BARs.  Consequently, multiple VGA devices can conflict
>>> with each other.  The VGA arbiter avoids conflicts by ensuring that those
>>> legacy resources are only routed to one VGA device at a time.
>>>
>>> The arbiter identifies the "default VGA" device, i.e., a legacy VGA device
>>> that was used by boot firmware.  It selects the first device that:
>>>
>>>     - is of PCI_CLASS_DISPLAY_VGA,
>>>     - has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and
>>>     - has PCI_BRIDGE_CTL_VGA set in all upstream bridges.
>>>
>>> Some systems don't have such a device.  For example, if a host bridge
>>> doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any
>>> devices below it.  Or, as on the HiSilicon D05, the VGA device may be
>>> behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the
>>> legacy VGA resources will never reach the device.
>>>
>>> This patch extends the arbiter so that if it doesn't find a device that
>>> meets all the above criteria, it selects the first device that:
>>>
>>>     - is of PCI_CLASS_DISPLAY_VGA and
>>>     - has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled
>>>
>>> If it doesn't find even that, it selects the first device that:
>>>
>>>     - is of class PCI_CLASS_DISPLAY_VGA.
>>>
>>> Such a device may not be able to use the legacy VGA resources, but most
>>> drivers can operate the device without those.  Setting it as the default
>>> device means its "boot_vga" sysfs file will contain "1", which Xorg (via
>>> libpciaccess) uses to help select its default output device.
>>>
>>> This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in
>>> particular; see the link below).
>>>
>>> It also replaces the powerpc fixup_vga() quirk, albeit with slightly
>>> different semantics: the quirk selected the first VGA device we found, and
>>> overrode that selection with any enabled VGA device we found.  If there
>>> were several enabled VGA devices, the *last* one we found would become the
>>> default.
>>>
>>> The code here instead selects the *first* enabled VGA device we find, and
>>> if none are enabled, the first VGA device we find.
>>>
>>> Link: http://lkml.kernel.org/r/20170901072744.2409-1-dja@axtens.net
>>> Tested-by: Daniel Axtens <dja at axtens.net>    # arm64, ppc64-qemu-tcg
>>> Signed-off-by: Bjorn Helgaas <bhelgaas at google.com>
>>> ---
>>>    arch/powerpc/kernel/pci-common.c |   12 ------------
>>>    drivers/gpu/vga/vgaarb.c         |   25 +++++++++++++++++++++++++
>>>    2 files changed, 25 insertions(+), 12 deletions(-)
>>>
>>> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
>>> index 02831a396419..0ac7aa346c69 100644
>>> --- a/arch/powerpc/kernel/pci-common.c
>>> +++ b/arch/powerpc/kernel/pci-common.c
>>> @@ -1740,15 +1740,3 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
>>>    }
>>>    DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
>>>    DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
>>> -
>>> -static void fixup_vga(struct pci_dev *pdev)
>>> -{
>>> -	u16 cmd;
>>> -
>>> -	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
>>> -	if ((cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) || !vga_default_device())
>>> -		vga_set_default_device(pdev);
>>> -
>>> -}
>>> -DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
>>> -			      PCI_CLASS_DISPLAY_VGA, 8, fixup_vga);
>>> diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
>>> index 76875f6299b8..aeb41f793ed4 100644
>>> --- a/drivers/gpu/vga/vgaarb.c
>>> +++ b/drivers/gpu/vga/vgaarb.c
>>> @@ -1468,6 +1468,31 @@ static int __init vga_arb_device_init(void)
>>>    			vgaarb_info(dev, "no bridge control possible\n");
>>>    	}
>>>    
>>> +	if (!vga_default_device()) {
>>> +		list_for_each_entry(vgadev, &vga_list, list) {
>>> +			struct device *dev = &vgadev->pdev->dev;
>>> +			u16 cmd;
>>> +
>>> +			pdev = vgadev->pdev;
>>> +			pci_read_config_word(pdev, PCI_COMMAND, &cmd);
>>> +			if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
>>> +				vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n");
>>> +				vga_set_default_device(pdev);
>>> +				break;
>>> +			}
>>> +		}
>>> +	}
>>> +
>>> +	if (!vga_default_device()) {
>>> +		vgadev = list_first_entry_or_null(&vga_list,
>>> +						  struct vga_device, list);
>>> +		if (vgadev) {
>>> +			struct device *dev = &vgadev->pdev->dev;
>>> +			vgaarb_info(dev, "setting as boot device (VGA legacy resources not available)\n");
>>> +			vga_set_default_device(pdev);
>>
>> Isn't 'pdev' NULL here? shouldn't it be vgadev->pdev instead?
>>
> That cannot not happen, though it isn't quite obvious.
> 'vgadev' will only be non-NULL, when the vga_list isn't empty and in
> that case pdev has been set up in the list_for_each_entry() loop above.
> 

Indeed, it can't be NULL. However, in that case we would be using the 
pdev from the last vgadev in the list whereas this last case suggest we 
are picking the first vgadev in the list. So I don't understand why 
'pdev' is being used rather than 'vgadev-pdev'.

Thanks,

-- 
Julien Thierry