[PATCH v2] ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1

[Lucas Stach]

Am Mittwoch, den 11.10.2017, 15:08 +0300 schrieb Leonard Crestez:
> Enable cpuidle support on i.MX6DL starting from
> IMX_CHIP_REVISION_1_1.
> 
> This also makes the code cleaner because 6q and 6dl actually have
> different revision histories.
> 
> Signed-off-by: Bai Ping <ping.bai at nxp.com>
> Signed-off-by: Leonard Crestez <leonard.crestez at nxp.com>

Reviewed-by: Lucas Stach <l.stach at pengutronix.de>

> ---
> 
> Changes since v1: https://www.spinics.net/lists/arm-kernel/msg610461.
> html
> * Clarified comment but kept > instead of >= because that's what the
> old code used. Would be OK to change with further feedback.
> 
>  arch/arm/mach-imx/mach-imx6q.c | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-
> imx6q.c
> index 45801b2..5707113 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -371,10 +371,13 @@ static struct platform_device
> imx6q_cpufreq_pdev = {
>  static void __init imx6q_init_late(void)
>  {
>  	/*
> -	 * WAIT mode is broken on TO 1.0 and 1.1, so there is no
> point
> -	 * to run cpuidle on them.
> +	 * WAIT mode is broken on imx6 Dual/Quad revision 1.0 and
> 1.1 so
> +	 * there is no point to run cpuidle on them.
> +	 *
> +	 * It does work on imx6 Solo/DualLite starting from 1.1
>  	 */
> -	if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
> +	if ((cpu_is_imx6q() && imx_get_soc_revision() >
> IMX_CHIP_REVISION_1_1) ||
> +	    (cpu_is_imx6dl() && imx_get_soc_revision() >
> IMX_CHIP_REVISION_1_0))
>  		imx6q_cpuidle_init();
>  
>  	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {