[PATCH 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file
Lothar Waßmann
LW at KARO-electronics.de
Wed Oct 11 04:50:32 PDT 2017
Currently the display (LCD or LVDS) configuration is duplicated with
slight variations in each TX6 module specific file.
Move it to an include file for simplification and consistency.
Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
---
arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 74 +------
arch/arm/boot/dts/imx6dl-tx6s-8034.dts | 171 +---------------
arch/arm/boot/dts/imx6dl-tx6s-8035.dts | 171 +---------------
arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 161 +--------------
arch/arm/boot/dts/imx6dl-tx6u-8033.dts | 170 +---------------
arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 109 +---------
arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts | 185 +----------------
arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts | 74 +------
arch/arm/boot/dts/imx6q-tx6q-1010.dts | 159 +--------------
arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts | 74 +------
arch/arm/boot/dts/imx6q-tx6q-1020.dts | 162 +--------------
arch/arm/boot/dts/imx6q-tx6q-1036.dts | 170 +---------------
arch/arm/boot/dts/imx6q-tx6q-1110.dts | 109 +---------
arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts | 187 ++----------------
arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi | 252 +++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi | 286 +++++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 4 +-
17 files changed, 616 insertions(+), 1902 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
index aac42ac..51a9bb9 100644
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW at KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW at KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,70 +42,16 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
- power-supply = <®_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display at di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&ET070001DM6>;
-
- ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
+&backlight {
+ pwms = <&pwm2 0 500000 0>;
+ /delete-property/ turn-on-delay-ms;
};
&can1 {
@@ -116,14 +62,14 @@
xceiver-supply = <®_3v3>;
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
&kpp {
status = "disabled";
};
+&lcd_panel {
+ compatible = "edt,etm0700g0edh6";
+};
+
®_can_xcvr {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
index ff8f7b1..9eb2ef1 100644
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2015-2016 Lothar Waßmann <LW at KARO-electronics.de>
+ * Copyright 2015-2017 Lothar Waßmann <LW at KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,174 +42,15 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6S-8034 Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
- aliases {
- display = &display;
- ipu1 = &ipu1;
- };
-
cpus {
/delete-node/ cpu at 1;
};
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd0_pwr>;
- enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
- power-supply = <®_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display at di0 {
- compatible = "fsl,imx-parallel-display";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_2>;
- interface-pix-fmt = "rgb24";
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&vga>;
-
- vga: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
&ds1339 {
@@ -227,11 +68,3 @@
MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */
>;
};
-
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
-®_lcd0_pwr {
- status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
index f988950..a5532ec 100644
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2015-2016 Lothar Waßmann <LW at KARO-electronics.de>
+ * Copyright 2015-2017 Lothar Waßmann <LW at KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,174 +42,15 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6S-8035 Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
- aliases {
- display = &display;
- ipu1 = &ipu1;
- };
-
cpus {
/delete-node/ cpu at 1;
};
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd0_pwr>;
- enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
- power-supply = <®_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display at di0 {
- compatible = "fsl,imx-parallel-display";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_2>;
- interface-pix-fmt = "rgb24";
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&vga>;
-
- vga: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
&ds1339 {
@@ -220,14 +61,6 @@
status = "disabled";
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
-®_lcd0_pwr {
- status = "disabled";
-};
-
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
index d1f1298..67ed045 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW at KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW at KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,166 +42,9 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6U-801x Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <®_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display at di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-};
-
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
index 4d3204a..7030b26 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW at KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW at KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,169 +42,11 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6U-8033 Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd0_pwr>;
- enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
- power-supply = <®_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display at di0 {
- compatible = "fsl,imx-parallel-display";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_2>;
- interface-pix-fmt = "rgb24";
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&vga>;
-
- vga: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
&ds1339 {
@@ -215,14 +57,6 @@
status = "disabled";
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
-®_lcd0_pwr {
- status = "disabled";
-};
-
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
index f0f759a..5342f2f 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@@ -42,116 +42,9 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
/ {
model = "Ka-Ro electronics TX6U-811x Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
- aliases {
- display = &lvds0;
- lvds0 = &lvds0;
- lvds1 = &lvds1;
- };
-
- backlight0: backlight0 {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
- power-supply = <®_lcd0_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- backlight1: backlight1 {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 0>;
- power-supply = <®_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-};
-
-&kpp {
- status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
- status = "okay";
-
- lvds0: lvds-channel at 0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds_timing0>;
- lvds_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-
- lvds1: lvds-channel at 1 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "disabled";
-
- display-timings {
- native-mode = <&lvds_timing1>;
- lvds_timing1: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-};
-
-&pwm1 {
- status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
index c817324..e43ff12 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
@@ -42,60 +42,21 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
/ {
model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
- aliases {
- display = &lvds0;
- lvds0 = &lvds0;
- lvds1 = &lvds1;
- };
-
- backlight0: backlight0 {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <®_lcd0_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
+&backlight0 {
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ turn-on-delay-ms = <35>;
+};
- backlight1: backlight1 {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <®_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
+&backlight1 {
+ pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+ turn-on-delay-ms = <35>;
};
&can1 {
@@ -105,131 +66,3 @@
&can2 {
xceiver-supply = <®_3v3>;
};
-
-&kpp {
- status = "disabled"; /* pads partially clash with backlight1 PWM */
-};
-
-&ldb {
- status = "okay";
-
- lvds0: lvds-channel at 0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds0_timing1>;
-
- lvds0_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- lvds0_timing1: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vfront-porch = <12>;
- hsync-len = <96>;
- vsync-len = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- lvds0_timing2: nl12880bc20 {
- clock-frequency = <71000000>;
- hactive = <1280>;
- vactive = <800>;
- hback-porch = <50>;
- hfront-porch = <50>;
- vback-porch = <5>;
- vfront-porch = <5>;
- hsync-len = <60>;
- vsync-len = <13>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-
- lvds1: lvds-channel at 1 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds1_timing2>;
-
- lvds1_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- lvds1_timing1: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vfront-porch = <12>;
- hsync-len = <96>;
- vsync-len = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- lvds1_timing2: nl12880bc20 {
- clock-frequency = <71000000>;
- hactive = <1280>;
- vactive = <800>;
- hback-porch = <50>;
- hfront-porch = <50>;
- vback-porch = <5>;
- vfront-porch = <5>;
- hsync-len = <60>;
- vsync-len = <13>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-};
-
-&pwm1 {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
index 71746ed..ac3050a 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW at KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW at KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,70 +42,16 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
- power-supply = <®_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display at di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&ET070001DM6>;
-
- ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
+&backlight {
+ pwms = <&pwm2 0 500000 0>;
+ /delete-property/ turn-on-delay-ms;
};
&can1 {
@@ -116,14 +62,14 @@
xceiver-supply = <®_3v3>;
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
&kpp {
status = "disabled";
};
+&lcd_panel {
+ compatible = "edt,etm0700g0edh6";
+};
+
®_can_xcvr {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
index 54bc442..4ee860b 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
@@ -42,166 +42,13 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <®_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display at di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
+&ipu2 {
+ status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
index 959ff3fb..a773f25 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW at KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW at KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,70 +42,16 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
- power-supply = <®_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display at di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&ET070001DM6>;
-
- ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
+&backlight {
+ pwms = <&pwm2 0 500000 0>;
+ /delete-property/ turn-on-delay-ms;
};
&can1 {
@@ -124,14 +70,14 @@
status = "disabled";
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
&kpp {
status = "disabled";
};
+&lcd_panel {
+ compatible = "edt,etm0700g0edh6";
+};
+
®_can_xcvr {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
index b49133d..0a4daec 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW at KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW at KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,164 +42,11 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1020 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <®_3v3>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display at di0 {
- compatible = "fsl,imx-parallel-display";
- interface-pix-fmt = "rgb24";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_1>;
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
&ds1339 {
@@ -210,14 +57,15 @@
status = "disabled";
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
+&ipu2 {
+ status = "disabled";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <4>;
+ non-removable;
no-1-8-v;
fsl,wp-controller;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
index 7c152e3..cb2fcb4 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW at KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW at KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -42,169 +42,11 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1036 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
- aliases {
- display = &display;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd0_pwr>;
- enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
- power-supply = <®_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- display: display at di0 {
- compatible = "fsl,imx-parallel-display";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_disp0_2>;
- interface-pix-fmt = "rgb24";
- status = "okay";
-
- port {
- display0_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- display-timings {
- native-mode = <&vga>;
-
- vga: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hsync-len = <96>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vsync-len = <2>;
- vfront-porch = <12>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETV570 {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <114>;
- hsync-len = <30>;
- hfront-porch = <16>;
- vback-porch = <32>;
- vsync-len = <3>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0350 {
- clock-frequency = <6413760>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <34>;
- hsync-len = <34>;
- hfront-porch = <20>;
- vback-porch = <15>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0430 {
- clock-frequency = <9009000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <2>;
- hsync-len = <41>;
- hfront-porch = <2>;
- vback-porch = <2>;
- vsync-len = <10>;
- vfront-porch = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- ET0500 {
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ET0700 { /* same as ET0500 */
- clock-frequency = <33264000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <88>;
- hsync-len = <128>;
- hfront-porch = <40>;
- vback-porch = <33>;
- vsync-len = <2>;
- vfront-porch = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- ETQ570 {
- clock-frequency = <6596040>;
- hactive = <320>;
- vactive = <240>;
- hback-porch = <38>;
- hsync-len = <30>;
- hfront-porch = <30>;
- vback-porch = <16>;
- vsync-len = <3>;
- vfront-porch = <4>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
};
&ds1339 {
@@ -215,18 +57,10 @@
status = "disabled";
};
-&ipu1_di0_disp0 {
- remote-endpoint = <&display0_in>;
-};
-
&ipu2 {
status = "disabled";
};
-®_lcd0_pwr {
- status = "disabled";
-};
-
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
index 900557d..f7b0acb 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -42,118 +42,15 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
- aliases {
- display = &lvds0;
- lvds0 = &lvds0;
- lvds1 = &lvds1;
- };
-
- backlight0: backlight0 {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 0>;
- power-supply = <®_lcd0_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
-
- backlight1: backlight1 {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 0>;
- power-supply = <®_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
};
-&kpp {
- status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
- status = "okay";
-
- lvds0: lvds-channel at 0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds_timing0>;
- lvds_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-
- lvds1: lvds-channel at 1 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "disabled";
-
- display-timings {
- native-mode = <&lvds_timing1>;
- lvds_timing1: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-};
-
-&pwm1 {
- status = "okay";
+&ipu2 {
+ status = "disabled";
};
&sata {
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
index be9233d..9648c21 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
@@ -42,60 +42,23 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
- aliases {
- display = &lvds0;
- lvds0 = &lvds0;
- lvds1 = &lvds1;
- };
-
- backlight0: backlight0 {
- compatible = "pwm-backlight";
- pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <®_lcd0_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
+&backlight0 {
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ turn-on-delay-ms = <35>;
+ power-supply = <®_lcd1_pwr>;
+};
- backlight1: backlight1 {
- compatible = "pwm-backlight";
- pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
- power-supply = <®_lcd1_pwr>;
- /*
- * a poor man's way to create a 1:1 relationship between
- * the PWM value and the actual duty cycle
- */
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <50>;
- };
+&backlight1 {
+ pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+ turn-on-delay-ms = <35>;
+ power-supply = <®_lcd1_pwr>;
};
&can1 {
@@ -110,132 +73,12 @@
status = "disabled";
};
-&kpp {
- status = "disabled"; /* pads partially clash with backlight1 PWM */
+&lvds0_panel {
+ compatible = "edt,et057090dhu";
};
-&ldb {
- status = "okay";
-
- lvds0: lvds-channel at 0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds0_timing1>;
-
- lvds0_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- lvds0_timing1: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vfront-porch = <12>;
- hsync-len = <96>;
- vsync-len = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- lvds0_timing2: nl12880bc20 {
- clock-frequency = <71000000>;
- hactive = <1280>;
- vactive = <800>;
- hback-porch = <50>;
- hfront-porch = <50>;
- vback-porch = <5>;
- vfront-porch = <5>;
- hsync-len = <60>;
- vsync-len = <13>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-
- lvds1: lvds-channel at 1 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
- status = "okay";
-
- display-timings {
- native-mode = <&lvds1_timing2>;
-
- lvds1_timing0: hsd100pxn1 {
- clock-frequency = <65000000>;
- hactive = <1024>;
- vactive = <768>;
- hback-porch = <220>;
- hfront-porch = <40>;
- vback-porch = <21>;
- vfront-porch = <7>;
- hsync-len = <60>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
-
- lvds1_timing1: VGA {
- clock-frequency = <25200000>;
- hactive = <640>;
- vactive = <480>;
- hback-porch = <48>;
- hfront-porch = <16>;
- vback-porch = <31>;
- vfront-porch = <12>;
- hsync-len = <96>;
- vsync-len = <2>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
-
- lvds1_timing2: nl12880bc20 {
- clock-frequency = <71000000>;
- hactive = <1280>;
- vactive = <800>;
- hback-porch = <50>;
- hfront-porch = <50>;
- vback-porch = <5>;
- vfront-porch = <5>;
- hsync-len = <60>;
- vsync-len = <13>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
- };
-};
-
-&pwm1 {
- status = "okay";
+&lvds1_panel {
+ compatible = "edt,et057090dhu";
};
&sata {
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
new file mode 100644
index 0000000..572c693
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ aliases {
+ display = &display;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd1_pwr>;
+ enable-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ turn-on-delay-ms = <35>;
+ /*
+ * a poor man's way to create a 1:1 relationship between
+ * the PWM value and the actual duty cycle
+ */
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ lcd_panel: lcd-panel {
+ compatible = "edt,etm0700g0dh6";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd0_pwr>;
+ enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ backlight = <&backlight>;
+ bus-format-override = "rgb24";
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_out>;
+ };
+ };
+ };
+
+ display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp0_1>;
+ status = "okay";
+
+ port at 0 {
+ reg = <0>;
+
+ lcd_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ lcd_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+
+ display-timings {
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hsync-len = <96>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vsync-len = <2>;
+ vfront-porch = <12>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETV570 {
+ u-boot,panel-name = "edt,et057090dhu";
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <114>;
+ hsync-len = <30>;
+ hfront-porch = <16>;
+ vback-porch = <32>;
+ vsync-len = <3>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0350 {
+ u-boot,panel-name = "edt,et0350g0dh6";
+ clock-frequency = <6413760>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <34>;
+ hsync-len = <34>;
+ hfront-porch = <20>;
+ vback-porch = <15>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0430 {
+ u-boot,panel-name = "edt,et0430g0dh6";
+ clock-frequency = <9009000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ vfront-porch = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ ET0500 {
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0700 { /* same as ET0500 */
+ u-boot,panel-name = "edt,etm0700g0dh6";
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETQ570 {
+ clock-frequency = <6596040>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <38>;
+ hsync-len = <30>;
+ hfront-porch = <30>;
+ vback-porch = <16>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ CoMTFT { /* same as ET0700 but with inverted pixel clock */
+ u-boot,panel-name = "edt,etm0700g0edh6";
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_in>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
new file mode 100644
index 0000000..2ca2eb3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi
@@ -0,0 +1,286 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ aliases {
+ display = &lvds0;
+ lvds0 = &lvds0;
+ lvds1 = &lvds1;
+ };
+
+ backlight0: backlight0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 0>;
+ power-supply = <®_lcd0_pwr>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ backlight1: backlight1 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 500000 0>;
+ power-supply = <®_lcd1_pwr>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <50>;
+ };
+
+ lvds0_panel: lvds0-panel {
+ compatible = "nlt,nl12880bc20-spwg-24";
+ backlight = <&backlight0>;
+ power-supply = <®_3v3>;
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ lvds1_panel: lvds1-panel {
+ compatible = "nlt,nl12880bc20-spwg-24";
+ backlight = <&backlight1>;
+ power-supply = <®_3v3>;
+
+ port {
+ panel_in_lvds1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+};
+
+&kpp {
+ status = "disabled"; /* pad conflict with backlight1 PWM */
+};
+
+&ldb {
+ status = "okay";
+
+ lvds0: lvds-channel at 0 {
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in_lvds0>;
+ };
+ };
+
+ display-timings {
+ hsd100pxn1 {
+ u-boot,panel-name = "hannstar,hsd100pxn1";
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vfront-porch = <12>;
+ hsync-len = <96>;
+ vsync-len = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ nl12880bc20 {
+ u-boot,panel-name = "nlt,nl12880bc20-spwg-24";
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <50>;
+ hfront-porch = <50>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ hsync-len = <60>;
+ vsync-len = <13>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ ET0700 {
+ u-boot,panel-name = "edt,etm0700g0dh6";
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETV570 {
+ u-boot,panel-name = "edt,et057090dhu";
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <114>;
+ hsync-len = <30>;
+ hfront-porch = <16>;
+ vback-porch = <32>;
+ vsync-len = <3>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel at 1 {
+ fsl,data-width = <18>;
+ status = "okay";
+
+ port at 4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in_lvds1>;
+ };
+ };
+
+ display-timings {
+ hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vfront-porch = <7>;
+ hsync-len = <60>;
+ vsync-len = <10>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vfront-porch = <12>;
+ hsync-len = <96>;
+ vsync-len = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ nl12880bc20 {
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <50>;
+ hfront-porch = <50>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ hsync-len = <60>;
+ vsync-len = <13>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+®_lcd0_pwr {
+ status = "okay";
+};
+
+®_lcd1_pwr {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index 9b563d4..015757c 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -146,7 +146,7 @@
pinctrl-0 = <&pinctrl_lcd0_pwr>;
gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-boot-on;
+ status = "disabled";
};
reg_lcd1_pwr: regulator-lcd1-pwr {
@@ -158,7 +158,7 @@
pinctrl-0 = <&pinctrl_lcd1_pwr>;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
- regulator-boot-on;
+ status = "disabled";
};
reg_usbh1_vbus: regulator-usbh1-vbus {
--
2.1.4
More information about the linux-arm-kernel
mailing list