[PATCH v2 1/5] dt-bindings: iio: at91-sama5d2_adc: add optional dma property

[Eugen Hristev]

Added property for DMA configuration of the device.

Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
---
 Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
index 552e7a8..5f94d479 100644
--- a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
@@ -17,6 +17,11 @@ Required properties:
   This property uses the IRQ edge types values: IRQ_TYPE_EDGE_RISING ,
   IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH
 
+Optional properties:
+  - dmas: Phandle to dma channel for the ADC.
+  See ../../dma/dma.txt for details.
+  - dma-names: Must be "rx" when dmas property is being used.
+
 Example:
 
 adc: adc at fc030000 {
@@ -31,4 +36,6 @@ adc: adc at fc030000 {
 	vddana-supply = <&vdd_3v3_lp_reg>;
 	vref-supply = <&vdd_3v3_lp_reg>;
 	atmel,trigger-edge-type = <IRQ_TYPE_EDGE_BOTH>;
+	dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+	dma-names = "rx";
 }
-- 
2.7.4