[PATCH v2 04/14] ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup source

[Claudiu Beznea]

From: Ludovic Desroches <ludovic.desroches at microchip.com>

Set the USER button as a wakeup source to allow wakeup from ULP0.

Signed-off-by: Ludovic Desroches <ludovic.desroches at microchip.com>
[claudiu.beznea at microchip.com: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index b31778121c41..ac79730213f1 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -519,6 +519,7 @@
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
+			wakeup-source;
 		};
 	};
 
-- 
2.7.4