[PATCH v4 06/12] mmc: mediatek: add async fifo and data tune support
Chaotian Jing
chaotian.jing at mediatek.com
Tue Oct 10 02:30:25 PDT 2017
mt2701/mt2712 supports async fifo & data tune, which can improve
host stability.
Signed-off-by: Chaotian Jing <chaotian.jing at mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 52 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 0dc45b3..ebec2b4 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -74,6 +74,7 @@
#define MSDC_DMA_CFG 0x9c
#define MSDC_PATCH_BIT 0xb0
#define MSDC_PATCH_BIT1 0xb4
+#define MSDC_PATCH_BIT2 0xb8
#define MSDC_PAD_TUNE 0xec
#define MSDC_PAD_TUNE0 0xf0
#define PAD_DS_TUNE 0x188
@@ -216,11 +217,20 @@
#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */
#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */
+#define MSDC_PATCH_BIT2_CFGRESP (0x1 << 15) /* RW */
+#define MSDC_PATCH_BIT2_CFGCRCSTS (0x1 << 28) /* RW */
+#define MSDC_PB2_RESPWAIT (0x3 << 2) /* RW */
+#define MSDC_PB2_RESPSTSENSEL (0x7 << 16) /* RW */
+#define MSDC_PB2_CRCSTSENSEL (0x7 << 29) /* RW */
+
#define MSDC_PAD_TUNE_DATWRDLY (0x1f << 0) /* RW */
#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */
#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */
#define MSDC_PAD_TUNE_CMDRRDLY (0x1f << 22) /* RW */
#define MSDC_PAD_TUNE_CLKTDLY (0x1f << 27) /* RW */
+#define MSDC_PAD_TUNE_RXDLYSEL (0x1 << 15) /* RW */
+#define MSDC_PAD_TUNE_RD_SEL (0x1 << 13) /* RW */
+#define MSDC_PAD_TUNE_CMD_SEL (0x1 << 21) /* RW */
#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */
#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */
@@ -294,6 +304,7 @@ struct msdc_save_para {
u32 pad_tune;
u32 patch_bit0;
u32 patch_bit1;
+ u32 patch_bit2;
u32 pad_ds_tune;
u32 pad_cmd_tune;
u32 emmc50_cfg0;
@@ -303,6 +314,8 @@ struct mtk_mmc_compatible {
u8 clk_div_bits;
bool hs400_tune; /* only used for MT8173 */
bool pad_tune0;
+ bool async_fifo;
+ bool data_tune;
};
struct msdc_tune_para {
@@ -365,24 +378,32 @@ struct msdc_host {
.clk_div_bits = 8,
.hs400_tune = false,
.pad_tune0 = false,
+ .async_fifo = false,
+ .data_tune = false,
};
static const struct mtk_mmc_compatible mt8173_compat = {
.clk_div_bits = 8,
.hs400_tune = true,
.pad_tune0 = false,
+ .async_fifo = false,
+ .data_tune = false,
};
static const struct mtk_mmc_compatible mt2701_compat = {
.clk_div_bits = 12,
.hs400_tune = false,
.pad_tune0 = true,
+ .async_fifo = true,
+ .data_tune = true,
};
static const struct mtk_mmc_compatible mt2712_compat = {
.clk_div_bits = 12,
.hs400_tune = false,
.pad_tune0 = true,
+ .async_fifo = true,
+ .data_tune = true,
};
static const struct of_device_id msdc_of_ids[] = {
@@ -1257,8 +1278,29 @@ static void msdc_init_hw(struct msdc_host *host)
sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0);
writel(0x403c0046, host->base + MSDC_PATCH_BIT);
sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1);
- writel(0xffff0089, host->base + MSDC_PATCH_BIT1);
+ writel(0xffff4089, host->base + MSDC_PATCH_BIT1);
sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL);
+ if (host->dev_comp->async_fifo) {
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPWAIT, 3);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_RESPSTSENSEL, 2);
+ sdr_set_field(host->base + MSDC_PATCH_BIT2,
+ MSDC_PB2_CRCSTSENSEL, 2);
+ /* use async fifo, then no need tune internal delay */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT2,
+ MSDC_PATCH_BIT2_CFGRESP);
+ sdr_set_bits(host->base + MSDC_PATCH_BIT2,
+ MSDC_PATCH_BIT2_CFGCRCSTS);
+ }
+
+ if (host->dev_comp->data_tune) {
+ sdr_set_bits(host->base + tune_reg,
+ MSDC_PAD_TUNE_RD_SEL | MSDC_PAD_TUNE_CMD_SEL);
+ } else {
+ /* choose clock tune */
+ sdr_set_bits(host->base + tune_reg, MSDC_PAD_TUNE_RXDLYSEL);
+ }
/* Configure to enable SDIO mode.
* it's must otherwise sdio cmd5 failed
@@ -1273,6 +1315,8 @@ static void msdc_init_hw(struct msdc_host *host)
host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
host->def_tune_para.pad_tune = readl(host->base + tune_reg);
+ host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
+ host->saved_tune_para.pad_tune = readl(host->base + tune_reg);
dev_dbg(host->dev, "init hardware done!");
}
@@ -1488,7 +1532,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
final_fall_delay.final_phase);
final_delay = final_fall_delay.final_phase;
}
- if (host->hs200_cmd_int_delay)
+ if (host->dev_comp->async_fifo || host->hs200_cmd_int_delay)
goto skip_internal;
for (i = 0; i < PAD_DELAY_MAX; i++) {
@@ -1652,6 +1696,8 @@ static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
host->hs400_mode = true;
writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
+ /* hs400 mode must set it to 0 */
+ sdr_clr_bits(host->base + MSDC_PATCH_BIT2, MSDC_PATCH_BIT2_CFGCRCSTS);
return 0;
}
@@ -1892,6 +1938,7 @@ static void msdc_save_reg(struct msdc_host *host)
host->save_para.pad_tune = readl(host->base + tune_reg);
host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
+ host->save_para.patch_bit2 = readl(host->base + MSDC_PATCH_BIT2);
host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
@@ -1909,6 +1956,7 @@ static void msdc_restore_reg(struct msdc_host *host)
writel(host->save_para.pad_tune, host->base + tune_reg);
writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
+ writel(host->save_para.patch_bit2, host->base + MSDC_PATCH_BIT2);
writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
--
1.8.1.1.dirty
More information about the linux-arm-kernel
mailing list