[PATCH 14/15] ARM: dts: at91: at91sam9x25ek: add pwm0

[Claudiu Beznea]

Add the PWM0 interface and one output of channel 0 (on PC10) on this headless
board. The output conflicts with LCD and ISI, so only enable it for this
particular board of the series (ISI is enabled on at91sam9g25ek, as an example
but we can do the other way around).

Signed-off-by: Nicolas Ferre <nicolas.ferre at microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 arch/arm/boot/dts/at91sam9x25ek.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index f8360fb23107..f705a3165656 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -29,6 +29,12 @@
 				phy-mode = "rmii";
 				status = "okay";
 			};
+
+			pwm0: pwm at f8034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+				status = "okay";
+			};
 		};
 	};
 };
-- 
2.7.4