[PATCH v2 0/2] ARM: dts: iwg20d-q7: New DT architecture

[Simon Horman]

On Fri, Oct 06, 2017 at 06:59:51PM +0100, Fabrizio Castro wrote:
> Some of the serial interfaces are exposed on the camera daughter board.
> The camera daughter board can be connected to the carrier board
> by means of expansion connectors 1, 2 and 3. The carrier board may host
> an RZ/G1M or an RZ/G1N based SoM.
> While adding support for the serial interfaces on the camera daughter
> board we faced the dilemma of how to properly describe all of the
> possible HW configurations and how to maximize code reuse.
> The best option would be to use device tree overlays, however there is
> still some work to be done on that front before actually using them,
> therefore for the time being we decided to provide .dtsi files to
> describe the carrier board and the camera daughter board, and provide
> .dts files to describe the HW configurations we need to support.
> 
> Best regards,
> 
> Fabrizio Castro (2):
>   ARM: dts: iwg20d-q7: Rework DT architecture
>   ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB

Thanks, applied.