[PATCH v3 1/2] dt-bindings: add device tree binding for Allwinner XR819 SDIO Wi-Fi

[icenowy at aosc.io]

在 2017-10-05 14:58，Kalle Valo 写道：
> Icenowy Zheng <icenowy at aosc.io> writes:
> 
>> 于 2017年10月4日 GMT+08:00 下午6:11:45, Maxime Ripard
>> <maxime.ripard at free-electrons.com> 写到:
>>> On Wed, Oct 04, 2017 at 10:02:48AM +0000, Arend van Spriel wrote:
>>>> On 10/4/2017 11:03 AM, Icenowy Zheng wrote:
>>>> >
>>>> >
>>>> > 于 2017年10月4日 GMT+08:00 下午5:02:17, Kalle Valo <kvalo at codeaurora.org>
>>> 写到:
>>>> > > Icenowy Zheng <icenowy at aosc.io> writes:
>>>> > >
>>>> > > > Allwinner XR819 is a SDIO Wi-Fi chip, which has the
>>> functionality to
>>>> > > use
>>>> > > > an out-of-band interrupt pin instead of SDIO in-band interrupt.
>>>> > > >
>>>> > > > Add the device tree binding of this chip, in order to make it
>>>> > > possible
>>>> > > > to add this interrupt pin to device trees.
>>>> > > >
>>>> > > > Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
>>>> > > > Acked-by: Rob Herring <robh at kernel.org>
>>>> > > > ---
>>>> > > > Changes in v3:
>>>> > > > - Renames the node name.
>>>> > > > - Adds ACK from Rob.
>>>> > > > Changes in v2:
>>>> > > > - Removed status property in example.
>>>> > > > - Added required property reg.
>>>> > > >
>>>> > > >   .../bindings/net/wireless/allwinner,xr819.txt      | 38
>>>> > > ++++++++++++++++++++++
>>>> > > >   1 file changed, 38 insertions(+)
>>>> > > >   create mode 100644
>>>> > >
>>> Documentation/devicetree/bindings/net/wireless/allwinner,xr819.txt
>>>> > >
>>>> > > Like I asked already last time, AFAICS there is no upstream xr819
>>>> > > wireless driver in drivers/net/wireless directory. Do we still
>>> accept
>>>> > > bindings like this for out-of-tree drivers?
>>>> >
>>>> > See esp8089.
>>>> >
>>>> > There's also no in-tree driver for it.
>>>> 
>>>> The question is whether we should. The above might be a precedent,
>>> but it
>>>> may not necessarily be the way to go. The commit message for esp8089
>>> seems
>>>> to hint that there is intent to have an in-tree driver:
>>>> 
>>>> """
>>>>     Note that at this point there only is an out of tree driver for
>>> this
>>>>     hardware, there is no clear timeline / path for merging this.
>>> Still
>>>>     I believe it would be good to specify the binding for this in
>>> tree
>>>>     now, so that any future migration to an in tree driver will not
>>> cause
>>>>     compatiblity issues.
>>>> 
>>>>     Cc: Icenowy Zheng <icenowy at aosc.xyz>
>>>>     Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>>>>     Signed-off-by: Rob Herring <robh at kernel.org>
>>>> """
>>>> 
>>>> Regardless the bindings are in principle independent of the kernel
>>> and just
>>>> describing hardware. I think there have been discussions to move the
>>>> bindings to their own repository, but apparently it was decided
>>> otherwise.
>>> 
>>> Yeah, I guess especially how it could be merged with the cw1200 
>>> driver
>>> would be very relevant to that commit log.
>> 
>> The cw1200 driver seems to still have some legacy platform
>> data. Maybe they should also be convert to DT.
>> (Or maybe compatible = "allwinner,xr819" is enough, as
>> xr819 is a specified variant of cw1200 family)
> 
> Ah, so the upstream cw1200 driver supports xr819? Has anyone tested
> that? Or does cw1200 more changes than just adding the DT support?

By doing some tests, XR819 is in the the CW1x60 family, which is not
yet well supported by cw1200 driver.

More work should be needed for support xr819 in cw1200 driver.