[PATCH] ARM: pxa: cm-x255: Fix up GPIO NAND device name in table

[Boris Brezillon]

On Sat, 07 Oct 2017 10:00:16 +0200
Robert Jarzmik <robert.jarzmik at free.fr> wrote:

> Boris Brezillon <boris.brezillon at free-electrons.com> writes:
> 
> > On Fri,  6 Oct 2017 23:51:44 +0200
> > Linus Walleij <linus.walleij at linaro.org> wrote:
> >  
> >> My patch set the device name wrong because I confused the
> >> device name for a partition name. Sorry.
> >> 
> >> Cc: arm at kernel.org
> >> Fixes: ("mtd: nand: gpio: Convert to use GPIO descriptors")
> >> Reported-by: Robert Jarzmik <robert.jarzmik at free.fr>
> >> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> >> ---
> >> This can be squashed into the commit or applied on top
> >> as a fix. The original patch was ACKed by the ARM SoC
> >> maintainers so I believe this is fine to apply.
> >> ---
> >>  arch/arm/mach-pxa/cm-x255.c | 2 +-
> >>  1 file changed, 1 insertion(+), 1 deletion(-)
> >> 
> >> diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
> >> index f8d67acb7194..fa8e7dd4d898 100644
> >> --- a/arch/arm/mach-pxa/cm-x255.c
> >> +++ b/arch/arm/mach-pxa/cm-x255.c
> >> @@ -178,7 +178,7 @@ static inline void cmx255_init_nor(void) {}
> >>  #if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
> >>  
> >>  static struct gpiod_lookup_table cmx255_nand_gpiod_table = {
> >> -	.dev_id         = "cmx255-nand",
> >> +	.dev_id         = "gpio-nand",  
> >
> > Are you sure it works? AFAIR, you have to set "<driver-name>.<dev-id>"
> > here, which, assuming there's only one gpio-nand dev, would give
> >
> > 	.dev_id		= "gpio-nand.0",  
> I'm sure Linus is correct this time.
> This is because :
> static struct platform_device cmx255_nand = {
> ...
> 	.id		= -1,
> ...
> 
> This -1 is the reason it will be "gpio-nand".

Right. I thought -1 was PLATFORM_DEVID_AUTO, but it's
PLATFORM_DEVID_NONE.

I'll squash the change in the initial commit.

Thanks,

Boris

> 
> Acked-by: Robert Jarzmik <robert.jarzmik at free.fr>
>