[RESEND][PATCH 5/7] nvmem: imx-ocotp: Add i.MX7D timing write clock setup support

[Philipp Zabel]

On Wed, 2017-10-04 at 23:25 +0100, Bryan O'Donoghue wrote:
> This patch adds logic to correctly setup the write timing parameters
> when blowing an OTP fuse for the i.MX7S/D.
> 
> Fixes: 0642bac7da42 ("nvmem: imx-ocotp: add write support")
> 
> Signed-off-by: Bryan O'Donoghue <pure.logic at nexus-software.ie>
> ---
>  drivers/nvmem/imx-ocotp.c | 61
> ++++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 55 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
> index 0cd7e03..40a1669 100644
> --- a/drivers/nvmem/imx-ocotp.c
> +++ b/drivers/nvmem/imx-ocotp.c
> @@ -51,6 +51,7 @@
>  #define IMX_OCOTP_BM_CTRL_REL_SHADOWS	0x00000400
>  
>  #define DEF_RELAX			20 /* > 16.5ns */
> +#define DEF_FSOURCE			1001
>  #define IMX_OCOTP_WR_UNLOCK		0x3E770000
>  #define IMX_OCOTP_READ_LOCKED_VAL	0xBADABADA
>  
> @@ -60,6 +61,7 @@ struct octp_params {
>  	unsigned int nregs;
>  	bool banked;
>  	unsigned int regs_per_bank;
> +	bool mx7_timing;
>  };
>  
>  struct ocotp_priv {
> @@ -194,6 +196,25 @@ static void imx_ocotp_set_imx6_timing(struct
> ocotp_priv *priv)
>  	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
>  }
>  
> +static void imx_ocotp_set_imx7_timing(struct ocotp_priv *priv)
> +{
> +	unsigned long clk_rate = 0;
> +	unsigned long fsource, strobe_prog;
> +	u32 timing = 0;
> +
> +	/* i.MX 7Solo Applications Processor Reference Manual, Rev.
> 0.1
> +	 * 6.4.3.3
> +	 */
> +	clk_rate = clk_get_rate(priv->clk);
> +	fsource = DIV_ROUND_UP(((clk_rate / 1000) * DEF_FSOURCE),
> 1000000) + 1;
> +	strobe_prog = ((clk_rate * 10) / 1000000) + 1;
> +
> +	timing = strobe_prog & 0x00000FFF;
> +	timing |= (fsource       << 12) & 0x000FF000;
> +
> +	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
> +}
> +
>  static int imx_ocotp_write(void *context, unsigned int offset, void
> *val,
>  			   size_t bytes)
>  {
> @@ -220,7 +241,10 @@ static int imx_ocotp_write(void *context,
> unsigned int offset, void *val,
>  	}
>  
>  	/* Setup the write timing values */
> -	imx_ocotp_set_imx6_timing(priv);
> +	if (priv->params->mx7_timing)
> +		imx_ocotp_set_imx7_timing(priv);
> +	else
> +		imx_ocotp_set_imx6_timing(priv);

Do we expect this to grow more different cases in the future?

Maybe it would be better to just store a .set_timing function pointer in
the params.

>  
>  	/* 47.3.1.3.2
>  	 * Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR]
> are clear.
> @@ -373,11 +397,36 @@ static struct nvmem_config
> imx_ocotp_nvmem_config = {
>  };
>  
>  static const struct octp_params params[] = {
> -	{ .nregs = 128, .banked = false, .regs_per_bank = 0},
> -	{ .nregs = 64,  .banked = false, .regs_per_bank = 0},
> -	{ .nregs = 128, .banked = false, .regs_per_bank = 0},
> -	{ .nregs = 128, .banked = false, .regs_per_bank = 0},
> -	{ .nregs = 64,  .banked = true, .regs_per_bank = 4},
> +	{
> +		.nregs = 128,
> +		.banked = false,
> +		.regs_per_bank = 0,
> +		.mx7_timing = false
> +	},
> +	{
> +		.nregs = 64,
> +		.banked = false,
> +		.regs_per_bank = 0,
> +		.mx7_timing = false
> +	},
> +	{
> +		.nregs = 128,
> +		.banked = false,
> +		.regs_per_bank = 0,
> +		.mx7_timing = false
> +	},
> +	{
> +		.nregs = 128,
> +		.banked = false,
> +		.regs_per_bank = 0,
> +		.mx7_timing = false
> +	},
> +	{
> +		.nregs = 64,
> +		.banked = true,
> +		.regs_per_bank = 4,
> +		.mx7_timing = true
> +	},
>  };
>  
>  static const struct of_device_id imx_ocotp_dt_ids[] = {

regards
Philipp