[PATCH 13/20] ARM: dts: sun4i: Remove gpio-keys warnings
Maxime Ripard
maxime.ripard at free-electrons.com
Thu Oct 5 03:49:48 PDT 2017
Some gpio-keys definitions in our DTs were having buttons defined with a
unit-address and that would generate a DTC warning.
Change the buttons node names to remove the warnings.
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 40 ++++++++++-----------
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 6 +--
2 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 7c7f12132ea3..13224f5ac166 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -67,7 +67,7 @@
#size-cells = <0>;
poll-interval = <20>;
- button at 0 {
+ left-joystick-left {
label = "Left Joystick Left";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
@@ -75,7 +75,7 @@
gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
};
- button at 1 {
+ left-joystick-right {
label = "Left Joystick Right";
linux,code = <ABS_X>;
linux,input-type = <EV_ABS>;
@@ -83,7 +83,7 @@
gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
};
- button at 2 {
+ left-joystick-up {
label = "Left Joystick Up";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
@@ -91,7 +91,7 @@
gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
};
- button at 3 {
+ left-joystick-down {
label = "Left Joystick Down";
linux,code = <ABS_Y>;
linux,input-type = <EV_ABS>;
@@ -99,7 +99,7 @@
gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
};
- button at 4 {
+ right-joystick-left {
label = "Right Joystick Left";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
@@ -107,7 +107,7 @@
gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
};
- button at 5 {
+ right-joystick-right {
label = "Right Joystick Right";
linux,code = <ABS_Z>;
linux,input-type = <EV_ABS>;
@@ -115,7 +115,7 @@
gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
};
- button at 6 {
+ right-joystick-up {
label = "Right Joystick Up";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
@@ -123,7 +123,7 @@
gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
};
- button at 7 {
+ right-joystick-down {
label = "Right Joystick Down";
linux,code = <ABS_RZ>;
linux,input-type = <EV_ABS>;
@@ -131,7 +131,7 @@
gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
};
- button at 8 {
+ dpad-left {
label = "DPad Left";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
@@ -139,7 +139,7 @@
gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
};
- button at 9 {
+ dpad-right {
label = "DPad Right";
linux,code = <ABS_HAT0X>;
linux,input-type = <EV_ABS>;
@@ -147,7 +147,7 @@
gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
};
- button at 10 {
+ dpad-up {
label = "DPad Up";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
@@ -155,7 +155,7 @@
gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
};
- button at 11 {
+ dpad-down {
label = "DPad Down";
linux,code = <ABS_HAT0Y>;
linux,input-type = <EV_ABS>;
@@ -163,49 +163,49 @@
gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
};
- button at 12 {
+ x {
label = "Button X";
linux,code = <BTN_X>;
gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
};
- button at 13 {
+ y {
label = "Button Y";
linux,code = <BTN_Y>;
gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
};
- button at 14 {
+ a {
label = "Button A";
linux,code = <BTN_A>;
gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
};
- button at 15 {
+ b {
label = "Button B";
linux,code = <BTN_B>;
gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
};
- button at 16 {
+ select {
label = "Select Button";
linux,code = <BTN_SELECT>;
gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
};
- button at 17 {
+ start {
label = "Start Button";
linux,code = <BTN_START>;
gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
};
- button at 18 {
+ top-left {
label = "Top Left Button";
linux,code = <BTN_TL>;
gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
};
- button at 19 {
+ top-right {
label = "Top Right Button";
linux,code = <BTN_TR>;
gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index be7508cecd2e..6e140547b638 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -79,19 +79,19 @@
#address-cells = <1>;
#size-cells = <0>;
- button at 0 {
+ back {
label = "Key Back";
linux,code = <KEY_BACK>;
gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
};
- button at 1 {
+ home {
label = "Key Home";
linux,code = <KEY_HOME>;
gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
};
- button at 2 {
+ menu {
label = "Key Menu";
linux,code = <KEY_MENU>;
gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
--
git-series 0.9.1
More information about the linux-arm-kernel
mailing list