[PATCH 4/4] ARM: qcom_defconfig: Enable Z2 Tablet related options

[Bjorn Andersson]

Select the options necessary to get USB, coincell, WiFI, touchscreen and
backlight on the Z2 Tablet (and other family B devices) working. The
device specific peripherals are selected as modules.

Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
---
 arch/arm/configs/qcom_defconfig | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index f6aa100bf69c..d937f2be7c39 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -60,6 +60,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_QCOM_COINCELL=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=y
@@ -82,6 +83,7 @@ CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
 # CONFIG_USB_NET_ZAURUS is not set
+CONFIG_BRCMFMAC=m
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
@@ -93,6 +95,10 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PM8XXX_VIBRATOR=y
 CONFIG_INPUT_PMIC8XXX_PWRKEY=y
 CONFIG_INPUT_UINPUT=y
+CONFIG_RMI4_CORE=m
+CONFIG_RMI4_I2C=m
+CONFIG_RMI4_F11=y
+CONFIG_RMI4_F12=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_MSM=y
@@ -128,8 +134,13 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_QCOM_RPM=y
 CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_LP855X=m
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_DYNAMIC_MINORS=y
@@ -148,11 +159,17 @@ CONFIG_USB_ACM=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_ULPI=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_MSM_OTG=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_ULPI_BUS=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
@@ -187,6 +204,7 @@ CONFIG_REMOTEPROC=y
 CONFIG_QCOM_ADSP_PIL=y
 CONFIG_QCOM_Q6V5_PIL=y
 CONFIG_QCOM_WCNSS_PIL=y
+CONFIG_RPMSG_CHAR=y
 CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
@@ -195,6 +213,7 @@ CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y
 CONFIG_QCOM_WCNSS_CTRL=y
+CONFIG_EXTCON_QCOM_SPMI_MISC=y
 CONFIG_IIO=y
 CONFIG_IIO_BUFFER_CB=y
 CONFIG_IIO_SW_TRIGGER=y
@@ -203,8 +222,10 @@ CONFIG_MPU3050_I2C=y
 CONFIG_AK8975=y
 CONFIG_IIO_HRTIMER_TRIGGER=y
 CONFIG_BMP280=y
+CONFIG_PWM=y
 CONFIG_PHY_QCOM_APQ8064_SATA=y
 CONFIG_PHY_QCOM_IPQ806X_SATA=y
+CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_QCOM_QFPROM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -226,3 +247,4 @@ CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
+CONFIG_CRYPTO_DRBG_MENU=y
-- 
2.12.0