[PATCH 2/4] ARM: qcom_defconfig: Resync with new Kconfig options

[Bjorn Andersson]

CONFIG_HWSPINLOCK must be selected explicitly for SMEM and its
dependencies to be enabled.

The update is generated by "make savedefconfig" and as such reflects
changes to the implicit state of other options, as of v4.14-rc1.

Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
---
 arch/arm/configs/qcom_defconfig | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 879159e4ab58..82cd86e524a4 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -1,5 +1,4 @@
 CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -28,9 +27,7 @@ CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCIE_QCOM=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_PREEMPT=y
-CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CLEANCACHE=y
 CONFIG_ARM_APPENDED_DTB=y
@@ -57,14 +54,12 @@ CONFIG_CFG80211=y
 CONFIG_RFKILL=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_QCOM_EBI2=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=y
@@ -103,7 +98,6 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MSM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_QUP=y
@@ -123,9 +117,9 @@ CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_CHARGER_QCOM_SMBB=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
+CONFIG_CHARGER_QCOM_SMBB=y
 CONFIG_THERMAL=y
 CONFIG_QCOM_TSENS=y
 CONFIG_MFD_PM8XXX=y
@@ -163,7 +157,6 @@ CONFIG_USB_GADGET_VBUS_DRAW=500
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_QCOM_DML=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_MSM=y
@@ -173,7 +166,6 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PM8058=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PM8XXX=y
 CONFIG_DMADEVICES=y
@@ -187,15 +179,16 @@ CONFIG_IPQ_GCC_4019=y
 CONFIG_IPQ_LCC_806X=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_LCC_8960=y
-CONFIG_MDM_GCC_9615=y
 CONFIG_MDM_LCC_9615=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
+CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_REMOTEPROC=y
 CONFIG_QCOM_ADSP_PIL=y
 CONFIG_QCOM_Q6V5_PIL=y
 CONFIG_QCOM_WCNSS_PIL=y
+CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
 CONFIG_QCOM_SMEM=y
@@ -213,7 +206,6 @@ CONFIG_IIO_HRTIMER_TRIGGER=y
 CONFIG_BMP280=y
 CONFIG_PHY_QCOM_APQ8064_SATA=y
 CONFIG_PHY_QCOM_IPQ806X_SATA=y
-CONFIG_NVMEM=y
 CONFIG_QCOM_QFPROM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -234,7 +226,4 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOCKUP_DETECTOR=y
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-- 
2.12.0