[PATCH v3 02/22] dt-bindings: arm: add support for ARM System Control and Management Interface(SCMI) protocol

[Arnd Bergmann]

On Wed, Oct 4, 2017 at 3:53 PM, Sudeep Holla <sudeep.holla at arm.com> wrote:
> On 04/10/17 13:35, Arnd Bergmann wrote:
>> On Wed, Oct 4, 2017 at 1:07 PM, Sudeep Holla <sudeep.holla at arm.com> wrote:

>>>
>>> Yes it depends on #clock-cells property. That's the main reason for
>>> adding #clock-cells
>>
>> I'm still unclear on this. Do you mean we look for a subnode with
>> reg=<0x14> and then assume it's a clock node and require the
>>  #clock-cells to be there,
>
> Yes that's how it's used. Presence of subnode with reg=0x14 indicates
> clock protocol and #clock-cells to indicate that it's clock provider
> expecting 1 parameter from consumer which is the clock identifier.
>
> or do we look through the sub-nodes to
>> find one with the #clock-cells property and then look up the 'reg'
>> property to find out which protocol number to use?
>>
>
> Not this way. Do you see any issues ?

We normally don't assume that a particular unit address implies
a specific function. Conventionally that would be done by matching
the "compatible" property instead.

What you do clearly works, but it's surprising to the reader.


>> I think the problem is the way we use the mailbox API in Linux, which
>> is completely abstract at the moment: it could be a pure doorbell, a
>> single-register for a data, some structured memory, or a
>> variable-length message. The assumption today is that the mailbox
>> user and the mailbox driver agree on the interpretation of that
>> void pointer.
>>
>
> Unfortunately true.
>
>> This breaks down here, as you require the message to be a
>> variable-length message in a fixed physical location, but assume that
>> the mailbox serves only as a doorbell.
>>
>
> Yes.
>
>> The solution might be to extend the mailbox API slightly, to
>> have explicit support for variable-length messages, and implement
>> support for that in either mailbox drivers or as an abstraction
>> on top of doorbell-type mailboxes.
>>
> I got the concept. But are you also suggesting that in bindings it shmem
> should be associated with mailbox controller rather than client ?

There are probably several ways of doing this better, we should see
what the best is we can come up with.

I think generally speaking we need a way for a mailbox user to
know what it should use as the mailbox data here, so it is
able to talk to different incompatible mailbox providers.

One idea I had is to use a nested mailbox driver, that turns
a doorbell or single-register styled mailbox into a variable-length
mailbox by adding a memory region, like

    mailbox at 1233000 {
        compatible = "vendor-hardware-specifc-id";
        interrupts = <34>;
        reg = <0x1233000 0x100>;
        #mbox-cells = <1>;
    };

    mailbox {
           compatible = "shmem-mailbox";
           mboxes = <&/mailbox at 1233000  25>;
           #mbox-cells = <1>;
           shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
    };

This would create one mailbox that only takes a register argument,
and another one that can take longer messages based on the first.
In your driver, you then refer to the second one and pass the
variable-length data into that directly.

        Arnd