[PATCH 5/6] staging: fsl-dpaa2/ethsw: Add README

[Razvan Stefanescu]

> -----Original Message-----
> From: linux-arm-kernel [mailto:linux-arm-kernel-bounces at lists.infradead.org]
> On Behalf Of Andrew Lunn
> Sent: Tuesday, September 19, 2017 3:18 PM
> To: Razvan Stefanescu <razvan.stefanescu at nxp.com>
> Cc: devel at driverdev.osuosl.org; Ruxandra Ioana Radulescu
> <ruxandra.radulescu at nxp.com>; arnd at arndb.de; gregkh at linuxfoundation.org;
> Alexandru Marginean <alexandru.marginean at nxp.com>; linux-
> kernel at vger.kernel.org; agraf at suse.de; stuyoder at gmail.com; Bogdan
> Purcareata <bogdan.purcareata at nxp.com>; linux-arm-
> kernel at lists.infradead.org; Laurentiu Tudor <laurentiu.tudor at nxp.com>
> Subject: Re: [PATCH 5/6] staging: fsl-dpaa2/ethsw: Add README
> 
> On Tue, Sep 19, 2017 at 12:01:37PM +0300, Razvan Stefanescu wrote:
> > +Driver uses the switch device driver model and exposes each switch port as
> > +a network interface, which can be included in a bridge. Traffic switched
> > +between ports is offloaded into the hardware. Exposed network interfaces
> > +are not used for I/O, they are used just for configuration. This
> > +limitation is going to be addressed in the future.
> 
> Hi Razvan
> 
> Could you briefly describe how Ethernet frames get from the CPU to the
> switch. This is what decided if you should write a plain switchdev
> driver, or a DSA driver.
> 
> 	Andrew
> 
Hello Andrew,

CPU frame handling will be added in a later. Each netdevice associated 
to a switch port will have I/O capabilities like dpaa2-ethernet devices.
The dpaa2-ethsw will use ACLs to redirect specific types of frames
(i.e BPDUs) to CPU.

Best regards,
Razvan S.