[PATCH v2 4/5] clk: aspeed: Register gated clocks

[Stephen Boyd]

On 09/21, Joel Stanley wrote:
> The majority of the clocks in the system are gates paired with a reset
> controller that holds the IP in reset.
> 
> This borrows from clk_hw_register_gate, but registers two 'gates', one
> to control the clock enable register and the other to control the reset
> IP. This allows us to enforce the ordering:
> 
>  1. Place IP in reset
>  2. Enable clock
>  3. Delay
>  4. Release reset
> 
> There are some gates that do not have an associated reset; these are
> handled by using -1 as the index for the reset.

Half of these aren't clks, but reset bits? Perhaps you should
register power domains for these things and then have the power
domain assert the reset, enable the clock, delay, and then
release the reset in the poweron callback. Then device drivers
don't have to be aware of the ordering, and you can keep
enforcing the ordering in one place, but we don't have to make
fake gates and shoehorn the sequence into the clk framework.

> 
> Signed-off-by: Joel Stanley <joel at jms.id.au>
> ---
>  drivers/clk/clk-aspeed.c | 128 +++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 128 insertions(+)
> 
> diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
> index 19531798e040..dec9db4ec47b 100644
> --- a/drivers/clk/clk-aspeed.c
> +++ b/drivers/clk/clk-aspeed.c
> @@ -191,6 +191,108 @@ static struct clk_hw *aspeed_calc_pll(const char *name, u32 val)
>  			mult, div);
>  }
>  
> +static int aspeed_clk_enable(struct clk_hw *hw)
> +{
> +	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
> +	unsigned long flags;
> +	u32 clk = BIT(gate->clock_idx);
> +	u32 rst = BIT(gate->reset_idx);
> +
> +	spin_lock_irqsave(gate->lock, flags);
> +
> +	if (gate->reset_idx >= 0) {
> +		/* Put IP in reset */
> +		regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst);
> +
> +		/* Delay 100us */
> +		udelay(100);
> +	}
> +
> +	/* Enable clock */
> +	regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, 0);
> +
> +	if (gate->reset_idx >= 0) {
> +		/* Delay 10ms */
> +		/* TODO: can we sleep here? */
> +		msleep(10);
> +
> +		/* Take IP out of reset */
> +		regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, 0);
> +	}
> +
> +	spin_unlock_irqrestore(gate->lock, flags);
> +
> +	return 0;
> +}
> +
> +static void aspeed_clk_disable(struct clk_hw *hw)
> +{
> +	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
> +	unsigned long flags;
> +	u32 clk = BIT(gate->clock_idx);
> +
> +	spin_lock_irqsave(gate->lock, flags);
> +
> +	/* Disable clock */

Drop useless comment please.

> +	regmap_update_bits(gate->map, ASPEED_CLK_STOP_CTRL, clk, clk);
> +
> +	spin_unlock_irqrestore(gate->lock, flags);
> +}
> +
> +static int aspeed_clk_is_enabled(struct clk_hw *hw)
> +{
> +	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
> +	u32 clk = BIT(gate->clock_idx);
> +	u32 reg;
> +
> +	regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, &reg);
> +
> +	return (reg & clk) ? 0 : 1;
> +}
> +
> +static const struct clk_ops aspeed_clk_gate_ops = {
> +	.enable = aspeed_clk_enable,
> +	.disable = aspeed_clk_disable,
> +	.is_enabled = aspeed_clk_is_enabled,
> +};
> +
> +static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev,
> +		const char *name, const char *parent_name, unsigned long flags,
> +		struct regmap *map, u8 clock_idx, u8 reset_idx,
> +		u8 clk_gate_flags, spinlock_t *lock)
> +{
> +	struct aspeed_clk_gate *gate;
> +	struct clk_init_data init;
> +	struct clk_hw *hw;
> +	int ret;
> +
> +	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
> +	if (!gate)
> +		return ERR_PTR(-ENOMEM);
> +
> +	init.name = name;
> +	init.ops = &aspeed_clk_gate_ops;
> +	init.flags = flags | CLK_IS_BASIC;

Please drop CLK_IS_BASIC.

> +	init.parent_names = parent_name ? &parent_name : NULL;
> +	init.num_parents = parent_name ? 1 : 0;
> +
> +	gate->map = map;
> +	gate->clock_idx = clock_idx;
> +	gate->reset_idx = reset_idx;
> +	gate->flags = clk_gate_flags;
> +	gate->lock = lock;
> +	gate->hw.init = &init;
> +
> +	hw = &gate->hw;
> +	ret = clk_hw_register(dev, hw);
> +	if (ret) {
> +		kfree(gate);
> +		hw = ERR_PTR(ret);
> +	}
> +
> +	return hw;
> +}
> +
>  static int __init aspeed_clk_probe(struct platform_device *pdev)
>  {
>  	const struct aspeed_clk_soc_data *soc_data;
> @@ -200,6 +302,7 @@ static int __init aspeed_clk_probe(struct platform_device *pdev)
>  	struct regmap *map;
>  	struct clk_hw *hw;
>  	u32 val, rate;
> +	int i;
>  
>  	map = syscon_node_to_regmap(dev->of_node);
>  	if (IS_ERR(map)) {
> @@ -269,6 +372,31 @@ static int __init aspeed_clk_probe(struct platform_device *pdev)
>  			&aspeed_clk_lock);
>  	aspeed_clk_data->hws[ASPEED_CLK_BCLK] = hw;
>  
> +	/* There are a number of clocks that not included in this driver as

Needs a /* before comment text starts. Also, TODO?

> +	 * more information is required:
> +	 *   D2-PLL
> +	 *   D-PLL
> +	 *   YCLK
> +	 *   RGMII
> +	 *   RMII
> +	 *   UART[1..5] clock source mux
> +	 */
> +
> +	for (i = 0; i < ARRAY_SIZE(aspeed_gates); i++) {
> +		const struct aspeed_gate_data *gd;
> +
> +		gd = &aspeed_gates[i];
> +		aspeed_clk_data->hws[ASPEED_CLK_GATES + i] =
> +			aspeed_clk_hw_register_gate(NULL, gd->name,

Pass device?

> +					     gd->parent_name,
> +					     gd->flags,
> +					     map,
> +					     gd->clock_idx,
> +					     gd->reset_idx,
> +					     CLK_GATE_SET_TO_DISABLE,
> +					     &aspeed_clk_lock);

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project