[PATCH 1/6] bcm63xx_enet: correct clock usage
Jonas Gorski
jonas.gorski at gmail.com
Sun Oct 1 04:02:15 PDT 2017
Check the return code of prepare_enable and change one last instance of
enable only to prepare_enable. Also properly disable and release the
clock in error paths and on remove for enetsw.
Signed-off-by: Jonas Gorski <jonas.gorski at gmail.com>
---
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 31 +++++++++++++++++++++-------
1 file changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index c6221f04a748..a45ec97b5b1e 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1773,7 +1773,9 @@ static int bcm_enet_probe(struct platform_device *pdev)
ret = PTR_ERR(priv->mac_clk);
goto out;
}
- clk_prepare_enable(priv->mac_clk);
+ ret = clk_prepare_enable(priv->mac_clk);
+ if (ret)
+ goto out_put_clk_mac;
/* initialize default and fetch platform data */
priv->rx_ring_size = BCMENET_DEF_RX_DESC;
@@ -1805,9 +1807,11 @@ static int bcm_enet_probe(struct platform_device *pdev)
if (IS_ERR(priv->phy_clk)) {
ret = PTR_ERR(priv->phy_clk);
priv->phy_clk = NULL;
- goto out_put_clk_mac;
+ goto out_disable_clk_mac;
}
- clk_prepare_enable(priv->phy_clk);
+ ret = clk_prepare_enable(priv->phy_clk);
+ if (ret)
+ goto out_put_clk_phy;
}
/* do minimal hardware init to be able to probe mii bus */
@@ -1900,13 +1904,16 @@ static int bcm_enet_probe(struct platform_device *pdev)
out_uninit_hw:
/* turn off mdc clock */
enet_writel(priv, 0, ENET_MIISC_REG);
- if (priv->phy_clk) {
+ if (priv->phy_clk)
clk_disable_unprepare(priv->phy_clk);
+
+out_put_clk_phy:
+ if (priv->phy_clk)
clk_put(priv->phy_clk);
- }
-out_put_clk_mac:
+out_disable_clk_mac:
clk_disable_unprepare(priv->mac_clk);
+out_put_clk_mac:
clk_put(priv->mac_clk);
out:
free_netdev(dev);
@@ -2748,7 +2755,9 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
ret = PTR_ERR(priv->mac_clk);
goto out_unmap;
}
- clk_enable(priv->mac_clk);
+ ret = clk_prepare_enable(priv->mac_clk);
+ if (ret)
+ goto out_put_clk;
priv->rx_chan = 0;
priv->tx_chan = 1;
@@ -2769,7 +2778,7 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
ret = register_netdev(dev);
if (ret)
- goto out_put_clk;
+ goto out_disable_clk;
netif_carrier_off(dev);
platform_set_drvdata(pdev, dev);
@@ -2778,6 +2787,9 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
return 0;
+out_disable_clk:
+ clk_disable_unprepare(priv->mac_clk);
+
out_put_clk:
clk_put(priv->mac_clk);
@@ -2809,6 +2821,9 @@ static int bcm_enetsw_remove(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, resource_size(res));
+ clk_disable_unprepare(priv->mac_clk);
+ clk_put(priv->mac_clk);
+
free_netdev(dev);
return 0;
}
--
2.13.2
More information about the linux-arm-kernel
mailing list