[PATCH 1/8] ARM: dts: imx7d-sbc-iot: add initial iot gateway dts
tyler at opensourcefoundries.com
tyler at opensourcefoundries.com
Thu Nov 30 12:14:27 PST 2017
From: Tyler Baker <tyler at opensourcefoundries.com>
The Compulab IoT Gateway is based on an NXP i.MX7D, dual core
Cortex-A7 clocking at 1GHz. It supports up to 2GB of DDR3,
and 32GB of eMMC flash. Onboard, there are two gigabit
ethernet controllers, 4 x USB2, RS485, and CAN.
This platform is based on the imx7d-cl-som-imx7 module but
includes a baseboard with additional peripherals
which is what this device tree is meant to describe.
This work has been derrived from the Compulab Linux sources
based on v4.1.
Signed-off-by: Tyler Baker <tyler at opensourcefoundries.com>
Signed-off-by: Ilya Ledvich <ilya at compulab.co.il>
---
arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 238 +++++++++++++++++++++++++++++++
1 file changed, 238 insertions(+)
create mode 100644 arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
diff --git a/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
new file mode 100644
index 0000000..50dfdd3
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
@@ -0,0 +1,238 @@
+/*
+ * Support for CompuLab SBC-IOT-iMX7 Single Board Computer
+ *
+ * Copyright (C) 2017 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya at compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx7d-cl-som-imx7.dts"
+
+/ {
+ model = "CompuLab SBC-IOT-iMX7";
+ compatible = "compulab,sbc-iot-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
+
+ aliases {
+ lcdif = &lcdif;
+ };
+};
+
+&ecspi3 {
+ fsl,spi-num-chipselects = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs>;
+ cs-gpios = <&gpio4 11 0>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ eeprom_iot at 54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ pagesize = <16>;
+ };
+
+ dvicape at 39 {
+ compatible = "sil164_simple";
+ reg = <0x39>;
+ };
+};
+
+&iomuxc {
+ pinctrl_xpen: xpengrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA13__GPIO3_IO18 0x34 /* P7-4 - gpio82 */
+ MX7D_PAD_LCD_DATA12__GPIO3_IO17 0x34 /* P7-5 - gpio81 */
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0xf /* P7-8 */
+ MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0xf /* P7-7 */
+ MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0xf /* P7-6 */
+ >;
+ };
+
+ pinctrl_ecspi3_cs: ecspi3_cs_grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x34 /* P7-9 */
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__I2C3_SDA 0x4000000f /* P7-3 */
+ MX7D_PAD_GPIO1_IO08__I2C3_SCL 0x4000000f /* P7-2 */
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO11__I2C4_SDA 0x4000000f
+ MX7D_PAD_GPIO1_IO10__I2C4_SCL 0x4000000f
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_EPDC_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_EPDC_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_EPDC_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_EPDC_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_EPDC_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_EPDC_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_EPDC_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_EPDC_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_EPDC_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_EPDC_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_EPDC_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_EPDC_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA00__LCD_CLK 0x79
+ MX7D_PAD_EPDC_DATA01__LCD_ENABLE 0x79
+ MX7D_PAD_EPDC_DATA02__LCD_VSYNC 0x79
+ MX7D_PAD_EPDC_DATA03__LCD_HSYNC 0x79
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_ENABLE__UART2_DCE_TX 0x79 /* P7-12 */
+ MX7D_PAD_LCD_CLK__UART2_DCE_RX 0x79 /* P7-13 */
+ MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS 0x79 /* P7-11 */
+ MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS 0x79 /* P7-10 */
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79 /* RS232-TX */
+ MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79 /* RS232-RX */
+ MX7D_PAD_I2C3_SDA__UART5_DCE_RTS 0x79 /* RS232-RTS */
+ MX7D_PAD_I2C3_SCL__UART5_DCE_CTS 0x79 /* RS232-CTS */
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX 0x79 /* R485-TX */
+ MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX 0x79 /* R485-RX */
+ MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS 0x79 /* R485-CTS */
+ MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS 0x79 /* R485-TTS */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */
+ >;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <24>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: dvi {
+ /* 1024x768p60 */
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ hfront-porch = <40>;
+ hback-porch = <220>;
+ hsync-len = <60>;
+ vactive = <768>;
+ vfront-porch = <7>;
+ vback-porch = <21>;
+ vsync-len = <10>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ enable-sdio-wakeup;
+ status = "okay";
+};
--
2.9.3
More information about the linux-arm-kernel
mailing list