[PATCH 06/11] ARM: dts: imx7: Move nodes which have no reg property out of bus

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

Move usbphynop1, usbphynop2, usbhypnop3, replicator and timer and nodes
from soc node to root node.

The nodes that have been moved do not have any register properties and thus
shouldn't be placed on the bus.

This fixes the following build warnings with W=1:

arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/replicator missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 30800000/usbphynop1 missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 30800000/usbphynop3 missing or empty reg/ranges property
arch/arm/boot/dts/imx7d-cl-som-imx7.dtb: Warning (simple_bus_reg): Node /soc/aips-bus at 30800000/usbphynop2 missing or empty reg/ranges property

Based on a patch from Simon Horman for r8a7795.dtsi.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 arch/arm/boot/dts/imx7d.dtsi |  14 ++---
 arch/arm/boot/dts/imx7s.dtsi | 120 +++++++++++++++++++++----------------------
 2 files changed, 67 insertions(+), 67 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 7878257..9d92725 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -63,6 +63,13 @@
 		};
 	};
 
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY2_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
 	soc {
 		etm at 3007d000 {
 			compatible = "arm,coresight-etm3x", "arm,primecell";
@@ -105,13 +112,6 @@
 		reg = <0x30b20200 0x200>;
 	};
 
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX7D_USB_PHY2_CLK>;
-		clock-names = "main_clk";
-		#phy-cells = <0>;
-	};
-
 	fec2: ethernet at 30bf0000 {
 		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
 		reg = <0x30bf0000 0x10000>;
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index e718fd2..81467ac 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -116,6 +116,66 @@
 		clock-output-names = "osc";
 	};
 
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY1_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	usbphynop3: usbphynop3 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+
+	replicator {
+		/*
+		 * non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell"
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+				/* replicator output ports */
+			port at 0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port at 1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port at 2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -260,43 +320,6 @@
 			};
 		};
 
-		replicator {
-			/*
-			 * non-configurable replicators don't show up on the
-			 * AMBA bus.  As such no need to add "arm,primecell"
-			 */
-			compatible = "arm,coresight-replicator";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* replicator output ports */
-				port at 0 {
-					reg = <0>;
-					replicator_out_port0: endpoint {
-						remote-endpoint = <&tpiu_in_port>;
-					};
-				};
-
-				port at 1 {
-					reg = <1>;
-					replicator_out_port1: endpoint {
-						remote-endpoint = <&etr_in_port>;
-					};
-				};
-
-				/* replicator input port */
-				port at 2 {
-					reg = <0>;
-					replicator_in_port0: endpoint {
-						slave-mode;
-						remote-endpoint = <&etf_out_port>;
-					};
-				};
-			};
-		};
-
 		intc: interrupt-controller at 31001000 {
 			compatible = "arm,cortex-a7-gic";
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
@@ -309,15 +332,6 @@
 			      <0x31006000 0x2000>;
 		};
 
-		timer {
-			compatible = "arm,armv7-timer";
-			interrupt-parent = <&intc>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		};
-
 		aips1: aips-bus at 30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
@@ -945,20 +959,6 @@
 				reg = <0x30b30200 0x200>;
 			};
 
-			usbphynop1: usbphynop1 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_PHY1_CLK>;
-				clock-names = "main_clk";
-				#phy-cells = <0>;
-			};
-
-			usbphynop3: usbphynop3 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
-				clock-names = "main_clk";
-				#phy-cells = <0>;
-			};
-
 			usdhc1: usdhc at 30b40000 {
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b40000 0x10000>;
-- 
2.7.4