[PATCH] ARM: dts: imx53-cx9020: Fix the Ethernet PHY reset GPIO polarity

[Shawn Guo]

On Sat, Nov 25, 2017 at 08:51:07PM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
> 
> As explained in Documentation/devicetree/bindings/net/fsl-fec.txt the
> phy-reset-gpios is active high only if the 'phy-reset-active-high' is
> present.
> 
> As 'phy-reset-active-high' is not used here, fix the device tree
> description by passing GPIO_ACTIVE_LOW flag.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Applied, thanks.