[PATCH V3 28/29] i7300_idle: remove unused file
Sinan Kaya
okaya at codeaurora.org
Mon Nov 27 08:58:05 PST 2017
i7300_idle.h is not being called by any source file and contains calls to
pci_get_bus_and_slot() that we are trying to deprecate. Remove unused file.
Signed-off-by: Sinan Kaya <okaya at codeaurora.org>
---
include/linux/i7300_idle.h | 84 ----------------------------------------------
1 file changed, 84 deletions(-)
delete mode 100644 include/linux/i7300_idle.h
diff --git a/include/linux/i7300_idle.h b/include/linux/i7300_idle.h
deleted file mode 100644
index 4dbe651..0000000
--- a/include/linux/i7300_idle.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef I7300_IDLE_H
-#define I7300_IDLE_H
-
-#include <linux/pci.h>
-
-/*
- * I/O AT controls (PCI bus 0 device 8 function 0)
- * DIMM controls (PCI bus 0 device 16 function 1)
- */
-#define IOAT_BUS 0
-#define IOAT_DEVFN PCI_DEVFN(8, 0)
-#define MEMCTL_BUS 0
-#define MEMCTL_DEVFN PCI_DEVFN(16, 1)
-
-struct fbd_ioat {
- unsigned int vendor;
- unsigned int ioat_dev;
- unsigned int enabled;
-};
-
-/*
- * The i5000 chip-set has the same hooks as the i7300
- * but it is not enabled by default and must be manually
- * manually enabled with "forceload=1" because it is
- * only lightly validated.
- */
-
-static const struct fbd_ioat fbd_ioat_list[] = {
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1},
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0},
- {0, 0}
-};
-
-/* table of devices that work with this driver */
-static const struct pci_device_id pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
- { } /* Terminating entry */
-};
-
-/* Check for known platforms with I/O-AT */
-static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
- struct pci_dev **ioat_dev,
- int enable_all)
-{
- int i;
- struct pci_dev *memdev, *dmadev;
-
- memdev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN);
- if (!memdev)
- return -ENODEV;
-
- for (i = 0; pci_tbl[i].vendor != 0; i++) {
- if (memdev->vendor == pci_tbl[i].vendor &&
- memdev->device == pci_tbl[i].device) {
- break;
- }
- }
- if (pci_tbl[i].vendor == 0)
- return -ENODEV;
-
- dmadev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN);
- if (!dmadev)
- return -ENODEV;
-
- for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
- if (dmadev->vendor == fbd_ioat_list[i].vendor &&
- dmadev->device == fbd_ioat_list[i].ioat_dev) {
- if (!(fbd_ioat_list[i].enabled || enable_all))
- continue;
- if (fbd_dev)
- *fbd_dev = memdev;
- if (ioat_dev)
- *ioat_dev = dmadev;
-
- return 0;
- }
- }
- return -ENODEV;
-}
-
-#endif
--
1.9.1
More information about the linux-arm-kernel
mailing list