[PATCH v2 10/11] arm64: dts: rockchip: add rx0 mipi-phy for rk3399
Jacob Chen
jacob-chen at iotwrt.com
Thu Nov 23 18:37:05 PST 2017
From: Shunqian Zheng <zhengsq at rock-chips.com>
It's a Designware MIPI D-PHY, used for ISP0 in rk3399.
Signed-off-by: Shunqian Zheng <zhengsq at rock-chips.com>
Signed-off-by: Jacob Chen <jacob2.chen at rock-chips.com>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 66a912fab5dd..a65b110afaf3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1292,6 +1292,17 @@
status = "disabled";
};
+ mipi_dphy_rx0: mipi-dphy-rx0 {
+ compatible = "rockchip,rk3399-mipi-dphy";
+ clocks = <&cru SCLK_MIPIDPHY_REF>,
+ <&cru SCLK_DPHY_RX0_CFG>,
+ <&cru PCLK_VIO_GRF>;
+ clock-names = "dphy-ref", "dphy-cfg", "grf";
+ power-domains = <&power RK3399_PD_VIO>;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
u2phy0: usb2-phy at e450 {
compatible = "rockchip,rk3399-usb2phy";
reg = <0xe450 0x10>;
--
2.15.0
More information about the linux-arm-kernel
mailing list