[PATCH 2/4] ARM: dts: imx6qdl: Add Variscite DART-MX6 SoM support

[Neil Armstrong]

Hi Fabio,

On 21/11/2017 17:54, Fabio Estevam wrote:
> On Tue, Nov 21, 2017 at 2:28 PM, Neil Armstrong <narmstrong at baylibre.com> wrote:
> 
>> +       reg_wl18xx_vmmc: regulator-wl18xx {
>> +               compatible = "regulator-fixed";
>> +               regulator-name = "vwl1807";
>> +               regulator-min-microvolt = <1800000>;
>> +               regulator-max-microvolt = <1800000>;
>> +               gpio = <&gpio7 8 0>;
> 
> GPIO_ACTIVE_HIGH please.

OK

> 
>> +&can2 {
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&pinctrl_flexcan2>;
>> +       status = "disabled";
>> +};
>> +
>> +&cpu0 {
>> +       arm-supply = <&sw1a_reg>;
>> +       soc-supply = <&sw1c_reg>;
>> +       operating-points = <
>> +               /* kHz    uV */
>> +               1200000 1350000
>> +               996000  1250000
>> +               852000  1250000
>> +               792000  1175000
>> +               396000  1175000
>> +       >;
>> +       fsl,soc-operating-points = <
>> +               /* ARM kHz  SOC-PU uV */
>> +               1200000 1275000
>> +               996000  1250000
>> +               852000  1250000
>> +               792000  1175000
>> +               396000  1175000
>> +       >;
> 
> 
> Don't the standard operating points described at imx6q.dtsi work on this board?
> 
> If not, please add a comment explaining why you need custom operating
> points here.

It should, I will remove them, anyway it will conflict with the ones in imx6dl.dtsi.

> 
>> +       pinctrl_flexcan1: flexcan1grp {
>> +               fsl,pins = <
>> +                       MX6QDL_PAD_GPIO_7__FLEXCAN1_TX          0x80000000
>> +                       MX6QDL_PAD_GPIO_8__FLEXCAN1_RX          0x80000000
> 
> Please avoid 0x80000000 and use the real IOMUX values instead.

Ok, will replace with 0x1b0b0

> 
>> +               >;
>> +       };
>> +
>> +       pinctrl_flexcan2: flexcan2grp {
>> +               fsl,pins = <
>> +                       MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x80000000
>> +                       MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x80000000
> 
> Please avoid 0x80000000 and use the real IOMUX values instead.
> 

Same here.

Thanks,
Neil