[PATCH V5 00/12] add clock driver for Spreadtrum platforms

[Chunyan Zhang]

This series adds Spreadtrum clock support together with its binding
documentation and devicetree data.

Any comments would be greatly appreciated.

This patchset also added a few common clock mactos into drivers/clk/clk_common.h,
which are generally useful for all vendors' clock driver, sunxi-ng, zte, sprd
(added in this patchse) use them (or part of them) at present, once this patchset
is merged, I can help to remove the duplicated code which is under the vendors'
respective directories.


Thanks,
Chunyan

Changes from V4: (https://www.spinics.net/lists/arm-kernel/msg616566.html)
* Added Rob's Acked-by;
* Removed spin lock from Spreadtrum's gate, mux, div drivers, since we have
  switched to use regmap.

Changes from V3: (https://lkml.org/lkml/2017/11/2/61)
* Addressed comments from Julien Thierry:
  - Clean the if branch of sprd_mux_helper_get_parent()
  - Have the Gate clock macros and ops for both mode (i.e. sc_gate and gate) separate;
  - Have the Mux clock macros with/without table separate, and same changes
    for the composite clock.
* Switched the function name from _endisable to _toggle;
* Fixed Kbuild test error:
  - Added exporting sprd_clk_regmap_init() which would be used in other module(s);
* Change the function sprd_clk_set_regmap() to the static one, and removed the
  declear from the include file;
* Addressed comments from Rob:
  - Separate the dt-binding include file from the driver patch;
  - Documented more for the property "clocks"
* Changed the syscon device names;
* Changed the name of 'sprd_mux_internal' to 'sprd_mux_ssel'
  

Changes from V2: (http://lkml.iu.edu/hypermail/linux/kernel/1707.1/01504.html)
* Switch to use regmap to access registers;
* Splited all clocks into 16 separated nodes, for each belongs to a single address area; 
* Rearranged the order of clock declaration in sc9860-clk.c, sorted them upon the address area;
* Added syscon device tree nodes which will be quoted by the node of clocks which are in
  the same address area with the syscon device;
* Revised the binding documentation according to the dt modification. 

Changes from V1: (https://lkml.org/lkml/2017/6/17/356)
* Address Stephen's comments:
  - Switch to use platform device driver instead of the DT probing mechanism.
  - Move the common clock macro out from vendor directory, but need to remove those
    overlap code from other vendors (such as sunxi-ng) once this get merged.
  - Add support to be built as a module.
  - Add 'sprd_' prefix for all spin locks used in these drivers.
  - Mark input parameter of sprd_x with const.
  - Remove unreasonable dependencies to CONFIG_64BIT.
  - Add readl() after writing the same register.
  - Remove CLK_IS_BASIC which is no longer used.
  - Remove unnecessery CLK_IGNORE_UNUSED when defining a clock.
  - Change to expose all clock index.
  - Use clk_ instead of ccu.
  - Add Kconfig for sprd clocks.
  - Move the fixed clocks out from the soc node.
  - Switch to use 64-bit math in pll driver instead of 32-bit math.
* Revise binding documentation according to dt modification.
* Rename sc9860.c to sc9860-clk.c

Chunyan Zhang (12):
  drivers: move clock common macros out from vendor directories
  clk: sprd: Add common infrastructure
  clk: sprd: add gate clock support
  clk: sprd: add mux clock support
  clk: sprd: add divider clock support
  clk: sprd: add composite clock support
  clk: sprd: add adjustable pll support
  dt-bindings: Add Spreadtrum clock binding documentation
  clk: sprd: Add dt-bindings include file for SC9860
  clk: sprd: add clocks support for SC9860
  arm64: dts: add syscon for whale2 platform
  arm64: dts: add clocks for SC9860

 Documentation/devicetree/bindings/clock/sprd.txt |   63 +
 arch/arm64/boot/dts/sprd/sc9860.dtsi             |  115 ++
 arch/arm64/boot/dts/sprd/whale2.dtsi             |   48 +-
 drivers/clk/Kconfig                              |    1 +
 drivers/clk/Makefile                             |    1 +
 drivers/clk/clk_common.h                         |   60 +
 drivers/clk/sprd/Kconfig                         |   14 +
 drivers/clk/sprd/Makefile                        |   11 +
 drivers/clk/sprd/common.c                        |  113 ++
 drivers/clk/sprd/common.h                        |   53 +
 drivers/clk/sprd/composite.c                     |   62 +
 drivers/clk/sprd/composite.h                     |   53 +
 drivers/clk/sprd/div.c                           |   92 +
 drivers/clk/sprd/div.h                           |   77 +
 drivers/clk/sprd/gate.c                          |  113 ++
 drivers/clk/sprd/gate.h                          |   61 +
 drivers/clk/sprd/mux.c                           |   78 +
 drivers/clk/sprd/mux.h                           |   76 +
 drivers/clk/sprd/pll.c                           |  268 +++
 drivers/clk/sprd/pll.h                           |  110 ++
 drivers/clk/sprd/sc9860-clk.c                    | 1987 ++++++++++++++++++++++
 include/dt-bindings/clock/sprd,sc9860-clk.h      |  408 +++++
 22 files changed, 3862 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/sprd.txt
 create mode 100644 drivers/clk/clk_common.h
 create mode 100644 drivers/clk/sprd/Kconfig
 create mode 100644 drivers/clk/sprd/Makefile
 create mode 100644 drivers/clk/sprd/common.c
 create mode 100644 drivers/clk/sprd/common.h
 create mode 100644 drivers/clk/sprd/composite.c
 create mode 100644 drivers/clk/sprd/composite.h
 create mode 100644 drivers/clk/sprd/div.c
 create mode 100644 drivers/clk/sprd/div.h
 create mode 100644 drivers/clk/sprd/gate.c
 create mode 100644 drivers/clk/sprd/gate.h
 create mode 100644 drivers/clk/sprd/mux.c
 create mode 100644 drivers/clk/sprd/mux.h
 create mode 100644 drivers/clk/sprd/pll.c
 create mode 100644 drivers/clk/sprd/pll.h
 create mode 100644 drivers/clk/sprd/sc9860-clk.c
 create mode 100644 include/dt-bindings/clock/sprd,sc9860-clk.h

-- 
2.7.4