[PATCH 1/2] ARM: dts: Add the support for display5 equipped with Mitsubishi (800x480) display

Lucas Stach l.stach at pengutronix.de
Fri Nov 17 07:07:18 PST 2017


Am Freitag, den 17.11.2017, 16:03 +0100 schrieb Lukasz Majewski:
> Hi Lucas,
> 
> > Am Freitag, den 17.11.2017, 15:13 +0100 schrieb Lukasz Majewski:
> > > Hi Shawn,
> > >   
> > > > On Fri, Nov 17, 2017 at 11:24:03AM +0100, Lukasz Majewski wrote:  
> > > > > This is the support for aa070mc01-ca1 Mitsubishi display.
> > > > > 
> > > > > > > > > > Signed-off-by: Lukasz Majewski <lukma at denx.de>
> > > > > ---
> > > > >  arch/arm/boot/dts/Makefile                         |  1 +
> > > > >  .../imx6q-display5-mitsubishi-aa070-800x480.dts    | 51
> > > > > ++++++++++++++++++++++ 2 files changed, 52 insertions(+)
> > > > >  create mode 100644
> > > > > arch/arm/boot/dts/imx6q-display5-mitsubishi-aa070-800x480.dts
> > > > > 
> > > > > diff --git a/arch/arm/boot/dts/Makefile
> > > > > b/arch/arm/boot/dts/Makefile
> > > > > index d9d0c82e7d20..10b3ad078dea 100644
> > > > > --- a/arch/arm/boot/dts/Makefile
> > > > > +++ b/arch/arm/boot/dts/Makefile
> > > > > @@ -407,6 +407,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> > > > > > > > > >  	imx6q-cm-fx6.dtb \
> > > > > > > > > >  	imx6q-cubox-i.dtb \
> > > > > > > > > >  	imx6q-dfi-fs700-m60.dtb \
> > > > > > > > > > +	imx6q-display5-mitsubishi-aa070-800x480.dtb \
> > > > > > > > > >  	imx6q-display5-tianma-tm070-1280x768.dtb \
> > > > > > > > > >  	imx6q-dmo-edmqmx6.dtb \
> > > > >  	imx6q-evi.dtb \    
> > > > 
> > > > <snip>
> > > >   
> > > > > +#include "imx6q-display5.dtsi"
> > > > > +
> > > > > +&panel {
> > > > > > > > > > +	compatible = "mitsubishi,aa070mc01-ca1";
> > > > > +};    
> > > > 
> > > > How many DTB files do you want to add for this display5 board?    
> > > 
> > > This is a single board, which can support panels which I've posted.
> > > 
> > > Those dtbs I do pack to u-boot' FIT image and don't need to worry
> > > that
> > > some display is not working (after setting bootloader env variable).
> > >   
> > > > It's
> > > > obvious no fun to maintain a bunch of DTB files for all the panels
> > > > this board can support.  
> > > 
> > > Please note that those files excessively use #include directive, and
> > > there is not so much code added (the longest part is license and
> > > comments).
> > >   
> > > >  Let's stop right here.  
> > > 
> > > If I may ask - how shall I proceed? What would be your suggestion to
> > > move on (dtb overlays) ?  
> > 
> > The solution we use for the ZII RDU1 and RDU2 boards is to have the
> > bootloader patch in the correct panel compatible strings. 
> 
> Do you mean adjusting the DTB accordingly in u-boot for each display -
> change panel/compatible to new display name ?

Exactly. Simply let the bootloader insert the correct panel compatible
string into the DTB.

Regards,
Lucas



More information about the linux-arm-kernel mailing list