[PATCH] ARM: dts: imx6qdl-wandboard-revd1: Make EDID functional

[Shawn Guo]

On Tue, Nov 07, 2017 at 12:29:31PM -0200, Fabio Estevam wrote:
> There are 0 ohm resistors that allow selecting the EDID I2C port to
> be I2C1 or I2C2.
> 
> On revd1 the 0 ohm resistors are populated in such a way that the I2C2
> is used as DDC I2C bus, so fix it accordingly. 
> 
> Reported-by: Luís Mendes <luis.p.mendes at gmail.com>
> Suggested-by: Philipp Zabel <p.zabel at pengutronix.de>
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Applied, thanks.