n900 in next-20170901
Tero Kristo
t-kristo at ti.com
Tue Nov 14 11:31:21 PST 2017
On 14/11/17 19:37, Tony Lindgren wrote:
> * Joonsoo Kim <iamjoonsoo.kim at lge.com> [171114 06:34]:
>> On Fri, Nov 10, 2017 at 07:36:20AM -0800, Tony Lindgren wrote:
>>> * Joonsoo Kim <iamjoonsoo.kim at lge.com> [171110 06:34]:
>>>> On Thu, Nov 09, 2017 at 07:26:10PM -0800, Tony Lindgren wrote:
>>>>> +#define OMAP34XX_SRAM_PHYS 0x40200000
>>>>> +#define OMAP34XX_SRAM_VIRT 0xd0010000
>>>>> +#define OMAP34XX_SRAM_SIZE 0x10000
>>>>
>>>> For my testing environment, vmalloc address space is started at
>>>> roughly 0xe0000000 so 0xd0010000 would not be valid.
>>>
>>> Well we can map it anywhere we want, got any preferences?
>>
>> My testing environment is a beagle-(xm?) for QEMU. It is configured by
>> CONFIG_VMSPLIT_3G=y so kernel address space is started at 0xc0000000.
>> And, it has 512 MB memory so 0xc0000000 ~ 0xdff00000 is used for
>> direct mapping. See below.
>>
>> [ 0.000000] Memory: 429504K/522240K available (11264K kernel code,
>> 1562K rwdata, 4288K rodata, 2048K init, 405K bss, 27200K reserved,
>> 65536K cma-reserved, 0K highmem)
>> [ 0.000000] Virtual kernel memory layout:
>> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
>> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
>> [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
>> [ 0.000000] lowmem : 0xc0000000 - 0xdff00000 ( 511 MB)
>> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
>> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
>> [ 0.000000] .text : 0xc0208000 - 0xc0e00000 (12256 kB)
>> [ 0.000000] .init : 0xc1300000 - 0xc1500000 (2048 kB)
>> [ 0.000000] .data : 0xc1500000 - 0xc1686810 (1563 kB)
>> [ 0.000000] .bss : 0xc168fc68 - 0xc16f512c ( 406 kB)
>>
>> Therefore, if OMAP34XX_SRAM_VIRT is 0xd0010000, direct mapping is
>> broken and the system doesn't work. I guess that we should use more
>> stable address like as 0xf0000000.
>
> OK. Let's forget about adding static mappings and my earlier
> patches to attempt to fix this. Below is what I now think we should
> merge as a fix before merging Joonsoo's patches. Please all review
> and test, adding Tero to Cc also.
>
> Regards,
>
> Tony
>
> 8< -----------------------
> From tony Mon Sep 17 00:00:00 2001
> From: Tony Lindgren <tony at atomide.com>
> Date: Mon, 13 Nov 2017 13:23:33 -0800
> Subject: [PATCH] ARM: OMAP2+: Fix SRAM virt to phys translation for
> save_secure_ram_context
>
> With the CMA changes from Joonsoo Kim <iamjoonsoo.kim at lge.com>, it
> was noticed that n900 stopped booting. After investigating it turned
> out that n900 save_secure_ram_context does some whacky virtual to
> physical address translation for the SRAM data address.
>
> As we now only have minimal parts of omap3 idle code copied to SRAM,
> running save_secure_ram_context() in SRAM is not needed. It only gets
> called on PM init. And it seems there's no need to ever call this from
> SRAM idle code.
>
> So let's just keep save_secure_ram_context() in DDR, and pass it the
> physical address of the parameters. We can do everything else in
> omap-secure.c like we already do for other secure code.
>
> And since we don't have any documentation, I still have no clue what
> the values for 0, 1 and 1 for the parameters might be. If somebody has
> figured it out, please do send a patch to add some comments.
>
> Debugged-by: Joonsoo Kim <iamjoonsoo.kim at lge.com>
> Signed-off-by: Tony Lindgren <tony at atomide.com>
> ---
> arch/arm/mach-omap2/omap-secure.c | 19 +++++++++++++++++++
> arch/arm/mach-omap2/omap-secure.h | 4 ++++
> arch/arm/mach-omap2/pm.h | 4 ----
> arch/arm/mach-omap2/pm34xx.c | 13 ++++---------
> arch/arm/mach-omap2/sleep34xx.S | 26 ++++----------------------
> 5 files changed, 31 insertions(+), 35 deletions(-)
I guess you could just use rx51_secure_dispatcher and ditch the
save_secure_ram_context call completely (and most of the other related
code)? That one would handle the cache also in a clean manner.
Something like:
rx51_secure_dispatcher(25, 0, FLAG_START_CRITICAL, 4,
__pa(omap3_secure_ram_storage), 0, 1, 1);
Can't test it myself as I don't have omap3 secure HW.
-Tero
>
> diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c
> --- a/arch/arm/mach-omap2/omap-secure.c
> +++ b/arch/arm/mach-omap2/omap-secure.c
> @@ -73,6 +73,25 @@ phys_addr_t omap_secure_ram_mempool_base(void)
> return omap_secure_memblock_base;
> }
>
> +u32 omap3_save_secure_ram(void __iomem *addr, int size)
> +{
> + u32 ret;
> + u32 param[5];
> +
> + if (size != OMAP3_SAVE_SECURE_RAM_SZ)
> + return OMAP3_SAVE_SECURE_RAM_SZ;
> +
> + param[0] = 4; /* Number of arguments */
> + param[1] = __pa(addr); /* Physical address for saving */
> + param[2] = 0;
> + param[3] = 1;
> + param[4] = 1;
> +
> + ret = save_secure_ram_context(__pa(param));
> +
> + return ret;
> +}
> +
> /**
> * rx51_secure_dispatcher: Routine to dispatch secure PPA API calls
> * @idx: The PPA API index
> diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
> --- a/arch/arm/mach-omap2/omap-secure.h
> +++ b/arch/arm/mach-omap2/omap-secure.h
> @@ -31,6 +31,8 @@
> /* Maximum Secure memory storage size */
> #define OMAP_SECURE_RAM_STORAGE (88 * SZ_1K)
>
> +#define OMAP3_SAVE_SECURE_RAM_SZ 0x803F
> +
> /* Secure low power HAL API index */
> #define OMAP4_HAL_SAVESECURERAM_INDEX 0x1a
> #define OMAP4_HAL_SAVEHW_INDEX 0x1b
> @@ -65,6 +67,8 @@ extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
> extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
> extern phys_addr_t omap_secure_ram_mempool_base(void);
> extern int omap_secure_ram_reserve_memblock(void);
> +extern u32 save_secure_ram_context(u32 args_pa);
> +extern u32 omap3_save_secure_ram(void __iomem *save_regs, int size);
>
> extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
> u32 arg1, u32 arg2, u32 arg3, u32 arg4);
> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
> --- a/arch/arm/mach-omap2/pm.h
> +++ b/arch/arm/mach-omap2/pm.h
> @@ -81,10 +81,6 @@ extern unsigned int omap3_do_wfi_sz;
> /* ... and its pointer from SRAM after copy */
> extern void (*omap3_do_wfi_sram)(void);
>
> -/* save_secure_ram_context function pointer and size, for copy to SRAM */
> -extern int save_secure_ram_context(u32 *addr);
> -extern unsigned int save_secure_ram_context_sz;
> -
> extern void omap3_save_scratchpad_contents(void);
>
> #define PM_RTA_ERRATUM_i608 (1 << 0)
> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
> --- a/arch/arm/mach-omap2/pm34xx.c
> +++ b/arch/arm/mach-omap2/pm34xx.c
> @@ -48,6 +48,7 @@
> #include "prm3xxx.h"
> #include "pm.h"
> #include "sdrc.h"
> +#include "omap-secure.h"
> #include "sram.h"
> #include "control.h"
> #include "vc.h"
> @@ -66,7 +67,6 @@ struct power_state {
>
> static LIST_HEAD(pwrst_list);
>
> -static int (*_omap_save_secure_sram)(u32 *addr);
> void (*omap3_do_wfi_sram)(void);
>
> static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
> @@ -121,8 +121,8 @@ static void omap3_save_secure_ram_context(void)
> * will hang the system.
> */
> pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
> - ret = _omap_save_secure_sram((u32 *)(unsigned long)
> - __pa(omap3_secure_ram_storage));
> + ret = omap3_save_secure_ram(omap3_secure_ram_storage,
> + OMAP3_SAVE_SECURE_RAM_SZ);
> pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
> /* Following is for error tracking, it should not happen */
> if (ret) {
> @@ -434,15 +434,10 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
> *
> * The minimum set of functions is pushed to SRAM for execution:
> * - omap3_do_wfi for erratum i581 WA,
> - * - save_secure_ram_context for security extensions.
> */
> void omap_push_sram_idle(void)
> {
> omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
> -
> - if (omap_type() != OMAP2_DEVICE_TYPE_GP)
> - _omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
> - save_secure_ram_context_sz);
> }
>
> static void __init pm_errata_configure(void)
> @@ -553,7 +548,7 @@ int __init omap3_pm_init(void)
> clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
> if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
> omap3_secure_ram_storage =
> - kmalloc(0x803F, GFP_KERNEL);
> + kmalloc(OMAP3_SAVE_SECURE_RAM_SZ, GFP_KERNEL);
> if (!omap3_secure_ram_storage)
> pr_err("Memory allocation failed when allocating for secure sram context\n");
>
> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
> --- a/arch/arm/mach-omap2/sleep34xx.S
> +++ b/arch/arm/mach-omap2/sleep34xx.S
> @@ -93,20 +93,13 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
> ENDPROC(enable_omap3630_toggle_l2_on_restore)
>
> /*
> - * Function to call rom code to save secure ram context. This gets
> - * relocated to SRAM, so it can be all in .data section. Otherwise
> - * we need to initialize api_params separately.
> + * Function to call rom code to save secure ram context.
> + *
> + * r0 = physical address of the parameters
> */
> - .data
> - .align 3
> ENTRY(save_secure_ram_context)
> stmfd sp!, {r4 - r11, lr} @ save registers on stack
> - adr r3, api_params @ r3 points to parameters
> - str r0, [r3,#0x4] @ r0 has sdram address
> - ldr r12, high_mask
> - and r3, r3, r12
> - ldr r12, sram_phy_addr_mask
> - orr r3, r3, r12
> + mov r3, r0 @ physical address of parameters
> mov r0, #25 @ set service ID for PPA
> mov r12, r0 @ copy secure service ID in r12
> mov r1, #0 @ set task id for ROM code in r1
> @@ -120,18 +113,7 @@ ENTRY(save_secure_ram_context)
> nop
> nop
> ldmfd sp!, {r4 - r11, pc}
> - .align
> -sram_phy_addr_mask:
> - .word SRAM_BASE_P
> -high_mask:
> - .word 0xffff
> -api_params:
> - .word 0x4, 0x0, 0x0, 0x1, 0x1
> ENDPROC(save_secure_ram_context)
> -ENTRY(save_secure_ram_context_sz)
> - .word . - save_secure_ram_context
> -
> - .text
>
> /*
> * ======================
>
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
More information about the linux-arm-kernel
mailing list