[PATCH 1/2] MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry

[Masahiro Yamada]

2017-11-09 1:51 GMT+09:00 Rob Herring <robh+dt at kernel.org>:
> On Mon, Nov 6, 2017 at 5:00 AM, Masahiro Yamada
> <yamada.masahiro at socionext.com> wrote:
>> 2017-11-06 19:41 GMT+09:00 James Hogan <jhogan at kernel.org>:
>>> Hi,
>>>
>>> On Sun, Nov 05, 2017 at 11:11:38PM +0900, Masahiro Yamada wrote:
>>>> +CC Ralf Baechle <ralf at linux-mips.org>
>>>> +CC linux-mips at linux-mips.org
>>>> +CC Kevin Cernekee <cernekee at gmail.com>
>>>> +CC Florian Fainelli <f.fainelli at gmail.com>
>>>>
>>>>
>>>> I missed to CC MIPS maintainers.
>>>
>>> Yes, please resend the patch so it lands in patchwork.linux-mips.org.
>>
>>
>> This is a part of clean-up series of DT building.
>>
>> I want Acked-by from MIPS maintainers
>> so that the whole series can go to a different tree.
>> (DT or Kbuild).
>>
>>
>> Sam addressed more clean-up candidates in MIPS Makefiles
>> https://patchwork.kernel.org/patch/10041879/
>>
>> So, I will probably end up with touching those Makefiles more.
>>
>> All patches must go to the same tree.
>>
>>
>>>> 2017-11-05 14:30 GMT+09:00 Masahiro Yamada <yamada.masahiro at socionext.com>:
>>>> > arch/mips/boot/dts/brcm/bcm96358nb4ser.dts does not exist, so
>>>> > we cannot build bcm96358nb4ser.dtb .
>>>
>>> This appears to be due to the file being renamed in commit 695835511f96
>>> ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom").
>>> Please can you update the commit message when you resend to mention the
>>> cause of the problem.
>>>
>>> You could also add the following if you like while you're at it:
>>>
>>> Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
>>> Cc: <stable at vger.kernel.org> # 4.9+
>
> I think this one can be applied independently and we'd want it to if
> we tag for stable. So I think it can go thru the MIPS tree.
>


As I said to MIPS folks, this patch must go before 2/2.

You picked up only 2/2, so your dt/kbuild branch is broken.


make ARCH=mips allyesconfig
&& make ARCH=mips CROSS_COMPILE=mips-linux- dtbs


will produce the following error.


make[2]: *** No rule to make target
'arch/mips/boot/dts/brcm/bcm96358nb4ser.dtb', needed by '__build'.
Stop.
scripts/Makefile.build:570: recipe for target 'arch/mips/boot/dts/brcm' failed
make[1]: *** [arch/mips/boot/dts/brcm] Error 2
arch/mips/Makefile:413: recipe for target 'dtbs' failed
make: *** [dtbs] Error 2


-- 
Best Regards
Masahiro Yamada