[PATCH v4 1/4] clk: meson: gxbb: fix wrong clock for SARADC/SANA

Yixun Lan yixun.lan at amlogic.com
Tue Nov 7 06:12:23 PST 2017


According to the datasheet, in Meson-GXBB/GXL series,
The clock gate bit for SARADC is HHI_GCLK_MPEG2 bit[22],
while clock gate bit for SANA is HHI_GCLK_MPEG0 bit[10].

Test passed at gxl-s905x-p212 board.

The following published datasheets are wrong and should be updated
[1] GXBB v1.1.4
[2] GXL v0.3_20170314

Fixes: 738f66d3211d ("clk: gxbb: add AmLogic GXBB clk controller driver")
Tested-by: Xingyu Chen <xingyu.chen at amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan at amlogic.com>
---
 drivers/clk/meson/gxbb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index b2d1e8ed7152..92168348ffa6 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -1139,7 +1139,7 @@ static MESON_GATE(gxbb_pl301, HHI_GCLK_MPEG0, 6);
 static MESON_GATE(gxbb_periphs, HHI_GCLK_MPEG0, 7);
 static MESON_GATE(gxbb_spicc, HHI_GCLK_MPEG0, 8);
 static MESON_GATE(gxbb_i2c, HHI_GCLK_MPEG0, 9);
-static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG0, 10);
+static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG0, 10);
 static MESON_GATE(gxbb_smart_card, HHI_GCLK_MPEG0, 11);
 static MESON_GATE(gxbb_rng0, HHI_GCLK_MPEG0, 12);
 static MESON_GATE(gxbb_uart0, HHI_GCLK_MPEG0, 13);
@@ -1190,7 +1190,7 @@ static MESON_GATE(gxbb_usb0_ddr_bridge, HHI_GCLK_MPEG2, 9);
 static MESON_GATE(gxbb_mmc_pclk, HHI_GCLK_MPEG2, 11);
 static MESON_GATE(gxbb_dvin, HHI_GCLK_MPEG2, 12);
 static MESON_GATE(gxbb_uart2, HHI_GCLK_MPEG2, 15);
-static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG2, 22);
+static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG2, 22);
 static MESON_GATE(gxbb_vpu_intr, HHI_GCLK_MPEG2, 25);
 static MESON_GATE(gxbb_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
 static MESON_GATE(gxbb_clk81_a53, HHI_GCLK_MPEG2, 29);
-- 
2.14.1




More information about the linux-arm-kernel mailing list