[PATCH v1 2/2] drm/stm: ltdc: add a 2nd endpoint
Benjamin Gaignard
benjamin.gaignard at linaro.org
Tue Nov 7 05:58:28 PST 2017
2017-10-26 13:48 GMT+02:00 Philippe Cornu <philippe.cornu at st.com>:
> ltdc can have up to 2 endpoints:
> - dpi external gpios: for rgb panels or external bridge ICs.
> - dpi internal ios: connected internally to dsi.
>
> Note: Refer to the reference manual to know if the dsi is
> present on your device.
Applied on drm-misc-next
Thanks
Benjamin
> Signed-off-by: Philippe Cornu <philippe.cornu at st.com>
> ---
> drivers/gpu/drm/stm/ltdc.c | 64 ++++++++++++++++++++++++++++++++--------------
> 1 file changed, 45 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index d5c8a42..38a6739 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -33,6 +33,8 @@
>
> #define MAX_IRQ 4
>
> +#define MAX_ENDPOINTS 2
> +
> #define HWVER_10200 0x010200
> #define HWVER_10300 0x010300
> #define HWVER_20101 0x020101
> @@ -886,18 +888,33 @@ int ltdc_load(struct drm_device *ddev)
> struct ltdc_device *ldev = ddev->dev_private;
> struct device *dev = ddev->dev;
> struct device_node *np = dev->of_node;
> - struct drm_bridge *bridge;
> - struct drm_panel *panel;
> + struct drm_bridge *bridge[MAX_ENDPOINTS] = {NULL};
> + struct drm_panel *panel[MAX_ENDPOINTS] = {NULL};
> struct drm_crtc *crtc;
> struct reset_control *rstc;
> struct resource *res;
> - int irq, ret, i;
> + int irq, ret, i, endpoint_not_ready = -ENODEV;
>
> DRM_DEBUG_DRIVER("\n");
>
> - ret = drm_of_find_panel_or_bridge(np, 0, 0, &panel, &bridge);
> - if (ret)
> - return ret;
> + /* Get endpoints if any */
> + for (i = 0; i < MAX_ENDPOINTS; i++) {
> + ret = drm_of_find_panel_or_bridge(np, 0, i, &panel[i],
> + &bridge[i]);
> +
> + /*
> + * If at least one endpoint is ready, continue probing,
> + * else if at least one endpoint is -EPROBE_DEFER and
> + * there is no previous ready endpoints, defer probing.
> + */
> + if (!ret)
> + endpoint_not_ready = 0;
> + else if (ret == -EPROBE_DEFER && endpoint_not_ready)
> + endpoint_not_ready = -EPROBE_DEFER;
> + }
> +
> + if (endpoint_not_ready)
> + return endpoint_not_ready;
>
> rstc = devm_reset_control_get_exclusive(dev, NULL);
>
> @@ -958,19 +975,25 @@ int ltdc_load(struct drm_device *ddev)
>
> DRM_INFO("ltdc hw version 0x%08x - ready\n", ldev->caps.hw_version);
>
> - if (panel) {
> - bridge = drm_panel_bridge_add(panel, DRM_MODE_CONNECTOR_DPI);
> - if (IS_ERR(bridge)) {
> - DRM_ERROR("Failed to create panel-bridge\n");
> - ret = PTR_ERR(bridge);
> - goto err;
> + /* Add endpoints panels or bridges if any */
> + for (i = 0; i < MAX_ENDPOINTS; i++) {
> + if (panel[i]) {
> + bridge[i] = drm_panel_bridge_add(panel[i],
> + DRM_MODE_CONNECTOR_DPI);
> + if (IS_ERR(bridge[i])) {
> + DRM_ERROR("panel-bridge endpoint %d\n", i);
> + ret = PTR_ERR(bridge[i]);
> + goto err;
> + }
> }
> - }
>
> - ret = ltdc_encoder_init(ddev, bridge);
> - if (ret) {
> - DRM_ERROR("Failed to init encoder\n");
> - goto err;
> + if (bridge[i]) {
> + ret = ltdc_encoder_init(ddev, bridge[i]);
> + if (ret) {
> + DRM_ERROR("init encoder endpoint %d\n", i);
> + goto err;
> + }
> + }
> }
>
> crtc = devm_kzalloc(dev, sizeof(*crtc), GFP_KERNEL);
> @@ -998,7 +1021,8 @@ int ltdc_load(struct drm_device *ddev)
> return 0;
>
> err:
> - drm_panel_bridge_remove(bridge);
> + for (i = 0; i < MAX_ENDPOINTS; i++)
> + drm_panel_bridge_remove(bridge[i]);
>
> clk_disable_unprepare(ldev->pixel_clk);
>
> @@ -1008,10 +1032,12 @@ int ltdc_load(struct drm_device *ddev)
> void ltdc_unload(struct drm_device *ddev)
> {
> struct ltdc_device *ldev = ddev->dev_private;
> + int i;
>
> DRM_DEBUG_DRIVER("\n");
>
> - drm_of_panel_bridge_remove(ddev->dev->of_node, 0, 0);
> + for (i = 0; i < MAX_ENDPOINTS; i++)
> + drm_of_panel_bridge_remove(ddev->dev->of_node, 0, i);
>
> clk_disable_unprepare(ldev->pixel_clk);
> }
> --
> 1.9.1
>
More information about the linux-arm-kernel
mailing list