[PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

[Giulio Benetti]

This patch gives possibility to set parallel lcd pins for RGB888.
To be used with tcon0 in your <target>.dts

Best regards
Giulio Benetti
Micronova srl

Signed-off-by: Giulio Benetti <giulio.benetti at micronovasrl.com>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 228c368..2e38dd3 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -921,6 +921,14 @@
 				pins = "PI20", "PI21";
 				function = "uart7";
 			};
+
+			lcd_rgb888_pins: lcd-rgb888 {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", 
+					"PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
+					"PD16", "PD17", "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
+					"PD24", "PD25", "PD26", "PD27";
+				function = "lcd0";
+			};
 		};
 
 		timer at 1c20c00 {
-- 
2.7.4