[PATCH 11/12] hwrng: bcm2835-rng: Enable BCM2835 RNG to work on BCM63xx platforms

Stefan Wahren stefan.wahren at i2se.com
Sat Nov 4 11:27:58 PDT 2017


Hi Florian

> Florian Fainelli <f.fainelli at gmail.com> hat am 2. November 2017 um 02:04 geschrieben:
> 
> 
> We have now incorporated all necessary functionality for the BCM63xx
> platforms to successfully migrate over bcm2835-rng, so add the final
> bits: Kconfig selection and proper platform_device device type matching
> to keep the same platform device name for registration to work.
> 
> Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
> ---
>  drivers/char/hw_random/Kconfig       |  7 ++++---
>  drivers/char/hw_random/bcm2835-rng.c | 11 ++++++++++-
>  2 files changed, 14 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> index 95a031e9eced..d0689cc8c7fc 100644
> --- a/drivers/char/hw_random/Kconfig
> +++ b/drivers/char/hw_random/Kconfig
> @@ -87,12 +87,13 @@ config HW_RANDOM_BCM63XX
>  	  If unusure, say Y.
>  
>  config HW_RANDOM_BCM2835
> -	tristate "Broadcom BCM2835 Random Number Generator support"
> -	depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X
> +	tristate "Broadcom BCM2835/BCM63xx Random Number Generator support"
> +	depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \
> +		   ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC
>  	default HW_RANDOM
>  	---help---
>  	  This driver provides kernel-side support for the Random Number
> -	  Generator hardware found on the Broadcom BCM2835 SoCs.
> +	  Generator hardware found on the Broadcom BCM2835 and BCM63xx SoCs.
>  
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called bcm2835-rng
> diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
> index 650e0033c273..d9ffe14f312b 100644
> --- a/drivers/char/hw_random/bcm2835-rng.c
> +++ b/drivers/char/hw_random/bcm2835-rng.c
> @@ -131,6 +131,7 @@ static const struct of_device_id bcm2835_rng_of_match[] = {
>  	{ .compatible = "brcm,bcm2835-rng"},
>  	{ .compatible = "brcm,bcm-nsp-rng", .data = &nsp_rng_of_data },
>  	{ .compatible = "brcm,bcm5301x-rng", .data = &nsp_rng_of_data },
> +	{ .compatible = "brcm,bcm6368-rng"},
>  	{},
>  };
>  
> @@ -164,7 +165,7 @@ static int bcm2835_rng_probe(struct platform_device *pdev)
>  	if (IS_ERR(priv->clk))
>  		priv->clk = NULL;
>  
> -	priv->rng.name = "bcm2835-rng";
> +	priv->rng.name = pdev->id_entry->name;

this change breaks registration on bcm2835, because the name is NULL.

Regards
Stefan

>  	priv->rng.init = bcm2835_rng_init;
>  	priv->rng.read = bcm2835_rng_read;
>  	priv->rng.cleanup = bcm2835_rng_cleanup;
> @@ -190,12 +191,20 @@ static int bcm2835_rng_probe(struct platform_device *pdev)
>  
>  MODULE_DEVICE_TABLE(of, bcm2835_rng_of_match);
>  
> +static struct platform_device_id bcm2835_rng_devtype[] = {
> +	{ .name = "bcm2835-rng" },
> +	{ .name = "bcm63xx-rng" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, bcm2835_rng_devtype);
> +
>  static struct platform_driver bcm2835_rng_driver = {
>  	.driver = {
>  		.name = "bcm2835-rng",
>  		.of_match_table = bcm2835_rng_of_match,
>  	},
>  	.probe		= bcm2835_rng_probe,
> +	.id_table	= bcm2835_rng_devtype,
>  };
>  module_platform_driver(bcm2835_rng_driver);
>  
> -- 
> 2.9.3
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel



More information about the linux-arm-kernel mailing list