[PATCH V3 04/11] clk: sprd: add gate clock support
Chunyan Zhang
zhang.lyra at gmail.com
Fri Nov 3 05:12:51 PDT 2017
Hi Julien,
On 3 November 2017 at 01:45, Julien Thierry <julien.thierry at arm.com> wrote:
> Hi,
>
>
> On 02/11/17 06:56, Chunyan Zhang wrote:
>>
>> Some clocks on the Spreadtrum's SoCs are just simple gates. Add
>> support for those clocks.
>>
>> Signed-off-by: Chunyan Zhang <chunyan.zhang at spreadtrum.com>
>> ---
>> drivers/clk/sprd/Makefile | 1 +
>> drivers/clk/sprd/gate.c | 106
>> ++++++++++++++++++++++++++++++++++++++++++++++
>> drivers/clk/sprd/gate.h | 54 +++++++++++++++++++++++
>> 3 files changed, 161 insertions(+)
>> create mode 100644 drivers/clk/sprd/gate.c
>> create mode 100644 drivers/clk/sprd/gate.h
>>
>> diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
>> index 74f4b80..8cd5592 100644
>> --- a/drivers/clk/sprd/Makefile
>> +++ b/drivers/clk/sprd/Makefile
>> @@ -1,3 +1,4 @@
>> obj-$(CONFIG_SPRD_COMMON_CLK) += clk-sprd.o
>> clk-sprd-y += common.o
>> +clk-sprd-y += gate.o
>> diff --git a/drivers/clk/sprd/gate.c b/drivers/clk/sprd/gate.c
>> new file mode 100644
>> index 0000000..831ef81
>> --- /dev/null
>> +++ b/drivers/clk/sprd/gate.c
>> @@ -0,0 +1,106 @@
>> +/*
>> + * Spreadtrum gate clock driver
>> + *
>> + * Copyright (C) 2017 Spreadtrum, Inc.
>> + * Author: Chunyan Zhang <chunyan.zhang at spreadtrum.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/regmap.h>
>> +
>> +#include "gate.h"
>> +
>> +DEFINE_SPINLOCK(sprd_gate_lock);
>> +EXPORT_SYMBOL_GPL(sprd_gate_lock);
>> +
>> +static void sprd_gate_endisable(const struct sprd_gate *sg, u32 en)
>> +{
>> + const struct sprd_clk_common *common = &sg->common;
>> + unsigned long flags = 0;
>> + unsigned int reg;
>> + int set = sg->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0;
>> +
>> + set ^= en;
>> +
>> + spin_lock_irqsave(common->lock, flags);
>> +
>> + sprd_regmap_read(common->regmap, common->reg, ®);
>> +
>> + if (set)
>> + reg |= sg->op_bit;
>> + else
>> + reg &= ~sg->op_bit;
>> +
>> + sprd_regmap_write(common->regmap, common->reg, reg);
>> +
>> + spin_unlock_irqrestore(common->lock, flags);
>> +}
>> +
>> +static void clk_sc_gate_endisable(const struct sprd_gate *sg, u32 en)
>> +{
>> + const struct sprd_clk_common *common = &sg->common;
>> + unsigned long flags = 0;
>> + int set = sg->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0;
>> + unsigned int offset;
>> +
>> + set ^= en;
>> +
>> + /*
>> + * Each set/clear gate clock has three registers:
>> + * common->reg - base register
>> + * common->reg + offset - set register
>> + * common->reg + 2 * offset - clear register
>> + */
>> + offset = set ? sg->sc_offset : sg->sc_offset * 2;
>> +
>> + spin_lock_irqsave(common->lock, flags);
>> + sprd_regmap_write(common->regmap, common->reg + offset,
>> sg->op_bit);
>> + spin_unlock_irqrestore(common->lock, flags);
>> +}
>> +
>> +static void sprd_gate_disable(struct clk_hw *hw)
>> +{
>> + struct sprd_gate *sg = hw_to_sprd_gate(hw);
>> +
>> + if (sg->sc_offset)
>> + clk_sc_gate_endisable(sg, 0);
>> + else
>> + sprd_gate_endisable(sg, 0);
>> +}
>> +
>> +static int sprd_gate_enable(struct clk_hw *hw)
>> +{
>> + struct sprd_gate *sg = hw_to_sprd_gate(hw);
>> +
>> + if (sg->sc_offset)
>> + clk_sc_gate_endisable(sg, 1);
>> + else
>> + sprd_gate_endisable(sg, 1);
>> +
>> + return 0;
>> +}
>> +
>> +static int sprd_gate_is_enabled(struct clk_hw *hw)
>> +{
>> + struct sprd_gate *sg = hw_to_sprd_gate(hw);
>> + struct sprd_clk_common *common = &sg->common;
>> + unsigned int reg;
>> +
>> + sprd_regmap_read(common->regmap, common->reg, ®);
>> +
>> + if (sg->flags & CLK_GATE_SET_TO_DISABLE)
>> + reg ^= sg->op_bit;
>> +
>> + reg &= sg->op_bit;
>> +
>> + return reg ? 1 : 0;
>> +}
>> +
>> +const struct clk_ops sprd_gate_ops = {
>> + .disable = sprd_gate_disable,
>> + .enable = sprd_gate_enable,
>> + .is_enabled = sprd_gate_is_enabled,
>> +};
>> +EXPORT_SYMBOL_GPL(sprd_gate_ops);
>
>
> I think it would be better to have a set of ops for each mode,
> sprd_gate_ops and sprd_sc_gate_ops rather than have each function decide
> whether it should use set/clear registers or the base registers.
>
> So you can have a macro SPRD_GATE_CLK that doesn't take an sc_offet and
> selects the sprd_gate_ops and another one that SPRD_SC_GATE_CLK using
> sprd_sc_gate_ops that takes the sc_offset as parameter.
>
That makes more sense, I will revise in the next version.
> Also, I feel keeping enable/disable function separate would be nicer instead
> of having "endisable" functions.
To avoid duplicate code, I prefer to keep the enable and disable
functions together, but I agree that 'endisable' is indeed not good
name for the function, I will revise the name to 'toggle' which I saw
qcom clk drivers use, it might make more sense.
Thanks,
Chunyan
>
> Cheers,
>
>
>> diff --git a/drivers/clk/sprd/gate.h b/drivers/clk/sprd/gate.h
>> new file mode 100644
>> index 0000000..5aeb53c
>> --- /dev/null
>> +++ b/drivers/clk/sprd/gate.h
>> @@ -0,0 +1,54 @@
>> +/*
>> + * Spreadtrum gate clock driver
>> + *
>> + * Copyright (C) 2017 Spreadtrum, Inc.
>> + * Author: Chunyan Zhang <chunyan.zhang at spreadtrum.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0
>> + */
>> +
>> +#ifndef _SPRD_GATE_H_
>> +#define _SPRD_GATE_H_
>> +
>> +#include "common.h"
>> +
>> +struct sprd_gate {
>> + u32 op_bit;
>> + u16 flags;
>> + u16 sc_offset;
>> +
>> + struct sprd_clk_common common;
>> +};
>> +
>> +#define SPRD_GATE_CLK(_struct, _name, _parent, _reg, _sc_offset, \
>> + _op_bit, _flags, _gate_flags) \
>> + struct sprd_gate _struct = { \
>> + .op_bit = _op_bit, \
>> + .sc_offset = _sc_offset, \
>> + .flags = _gate_flags, \
>> + .common = { \
>> + .regmap = NULL, \
>> + .reg = _reg, \
>> + .lock = &sprd_gate_lock, \
>> + .hw.init = CLK_HW_INIT(_name, \
>> + _parent, \
>> + &sprd_gate_ops, \
>> + _flags), \
>> + } \
>> + }
>> +
>> +static inline struct sprd_gate *hw_to_sprd_gate(const struct clk_hw *hw)
>> +{
>> + struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
>> +
>> + return container_of(common, struct sprd_gate, common);
>> +}
>> +
>> +void sprd_gate_helper_disable(struct sprd_clk_common *common, u32 gate);
>> +int sprd_gate_helper_enable(struct sprd_clk_common *common, u32 gate);
>> +int sprd_gate_helper_is_enabled(struct sprd_clk_common *common, u32
>> gate);
>> +
>> +extern const struct clk_ops sprd_gate_ops;
>> +extern spinlock_t sprd_gate_lock;
>> +
>> +#endif /* _SPRD_GATE_H_ */
>>
>
> --
> Julien Thierry
More information about the linux-arm-kernel
mailing list